Walfisch G. et al, Tolerance limits and mechanical characteristics of the human thorax in frontal and side impacts IRCOBI Conf. (International Research Committee on Biomechanics of Impacts), (1982), Cologne, Germany, 122
2.
KroellC.K.SchneiderD.C.NahumA.M., Impact tolerance of the human thorax II, Proc. 18th Stapp Conf., (1974) SAE paper 741187, 383
3.
MertzH.J.GaddC.W., (1971) Thoracic tolerance to whole body deceleration, SAE paper 710852
4.
LauI.V.VianoD.C., The viscous criterion.....Soc. Auto. Eng. Trans. 95 part 5, (1986), 261
5.
TaylorD.E.M.CooperG.J., Stress strain characteristics of flat bones ..., Materials properties and stress analysis in biomechanics. Ed. YettramA.L., Manchester University Press. (1989) 250
6.
MillsN.J.,
Back and Chest Protectors for riding. Equestrian Trade News, November, (1985), 21
7.
MillsN.J.GilchristA., Body Protectors for Horse Riders, IRCOBI conf. (1990), Bron, France, 155
8.
HuntH.MillsN.J., The protection of horse riders in impacts with the ground, IRCOBI Conf., (1989) Stockholm, 157
9.
BS 7188: 1989. Impact Absorbing Playground Surfaces, British Standards Institution, London
10.
Unpublished RAPRA report, Relative shock absorption of body protectors for equestrian use, (1990)
11.
BETA Specification for Body Protectors for Equestrian Use, 2nd editionJune1992, British Equestrian Trade Association, Wothersome Grange, Bramham, Yorkshire.
12.
The BETA Standard for horse riders’ body and shoulder protectors, April1995, British Equestrian Trade Association, Wothersome Grange, Bramham, Yorkshire.
13.
LoveridgeP.MillsN.J., Prediction of packaging cushion curves and helmet liner responses, Cellular Polymers International Conference II, Edinburgh, March1993, paper 17, Rapra
14.
SwyngedauS., Models for the Compressibility of Layered Polymeric Sponges,
Polym. Eng. Sci., 31. (1991), 140
15.
MillsN.J.GilchristA., Protection of the side of the head, IRCOBI conf., (1994), Lyon, France, 81
16.
MillsN.J.responseImpact, in Low density cellular plastics: Physical basis of behaviour, Eds.
HilyardN.C.CunninghamA., Chapman and Hall, (1994) 270
17.
GilchristA.MillsN.J., Analysis of impacts on two layer foams and evaluation of body protectors, Cellular Polymers International Conference III, Coventry, April1995, paper 25, Rapra
18.
LoveridgeP., The mechanical properties of closed cell polyolefin foams, Ph.D thesis, 1994, University of Birmingham.