In this paper, the experimental and theoretical studies on the uniaxial compressive cyclic loading process of a kind of bumper foams are presented. The uniaxial cyclic loading tests are conducted to investigate the influence of the geometrical dimension and the displacement rate on the mechanical behavior of specimen. The influences of preloading process are analyzed experimentally and the residual strains are then discussed. At the same time, a modified pseudo-elastic model considering the residual strain is given to describe the unloading behavior and realized with the finite element method. The numerical results demonstrate that the present model is suitable to describe the unloading behavior of a kind of bumper foam. The limitations of this model are finally discussed.
ShenY., GolnaraghiF., and PlumtreeA., Modelling compressive cyclic stress–strain behaviour of structural foam. Int J. Fatigue, 23(6) (2001), 491–497.
2.
WiddleR.D.Jr., BajajA.K., and DaviesP., Measurement of the Poisson's ratio of flexible polyurethane foam and its influence on a uniaxial compression model. Int. J. Eng. Sci., 46(1) (2008), 31–49.
3.
PieroGianpietro Del, and PampoliniGiampiero, On the rate-dependent properties of open-cell polyurethane foams. Technische Mechanik, 30(1–3) (2010) 74–84
4.
QunliLiu, and GhatuSubhash, A Phenomenological Constitutive Model for Foams Under Large Deformations. Polym. Eng. Sci., 44(3) (2004), 463–473.
5.
MassimilianoAvalle, GiovanniBelingardi, and AndreaIbba, Mechanical models of cellular solids: Parameters identification from experimental tests. Int J. Impact Eng., 34(1) (2007), 3–27.
6.
RongDeng, PatriciaDavies, and Bajaj AnilK., A Case Study on the Use of Fractional Derivatives: The Low-Frequency Viscoelastic Uni-Directional Behavior of Polyurethane Foam. Nonlinear Dynam., 38(1–2) (2004), 247–265.
7.
DengR., DaviesP., and BajajA.K., A nonlinear fractional derivative model for large uniaxial deformation behavior of polyurethane foam. Signal Process, 86(10) (2006), 2728–2743.
8.
EsatOzturk Umud, and GunayAnlas, Energy absorption calculations in multiple compressive loading of polymeric foams. Mater. Design, 30(1) (2009), 15–22.
9.
DollS., SchweizerhofK., On the Development of Volumetric Strain Energy Functions. J. Appl. Mech. - T ASME2000; 67(1): 17–21.
10.
GendyA.S., and SaleebA.F., Nonlinear material parameter estimation for characterizing hyperelastic large strain models. Comput. Mech., 25(1) (2000), 66–77.
11.
HamidGhaemi, BehdinanK., and SpenceA., On the development of compressible pseudo-strain energy density function for elastomers Part 1. Theory and experiment. J. Mater Process. Tech., 178(1–3) (2006), 307–316.
12.
OgdenR.W., and RoxburgD.G., A pseudo-elastic model for the Mullins effect in filled rubber, Proc. Roy. Soc. London A, 455 (1999), 2861–2877.
13.
DorfmannA., and OgdenR.W., A pseudo-elastic model for loading, partial unloading and reloading of particle-inforced rubber, Int. J. Solids Struct., 40 (2003), 2699–2714.
14.
GuoZ., and SluysL.J., Application of Pseudo-elastic Model to Compressible Materials. COMPUT. MECH. WCCM VI in conjunction with APCOM'04, Sept. 5–10, 2004, Beijing, China.
15.
GuoZ., and SluysL.J., Computational modelling of the stress-softening phenomenon of rubber-like materials under cyclic loading. Eur. J. Mech. A-SOLID, 25 (2006), 877–896.
16.
Gracia LeticiaA., EstefaniaPena, Royo JoseM., A comparison between pseudo-elastic and damage models for modelling the Mullins effect in industrial rubber components. Mech. Res. Commun., 36 (2009), 769–776.
17.
BoseK., and DorfmannA., Computational aspects of a pseudo-elastic constitutive model for muscle properties in a soft-bodied arthropod. Int. J. Nonlin. Mech., 44 (2009), 42–50.
18.
DorfmannA., and OgdenR.W., A constitutive model for the Mullins effect with permanent set in particle-reinforced rubber, Int. J. Solids Struct., 41 (2004), 1855–1878.
19.
GuoZ., and SluysL.J., Constitutive modelling of hyperelastic rubber-like materials. HERON, 53(3) (2008), 109–132.
20.
ZhangX.F., AndrieuxF., and SunD.Z., Pseudo-elastic description of polymeric foams at finite deformation with stress softening and residual strain effects. Mater. Design, 32(2) (2011), 877–884.
21.
XinYang, YongXia, and QingZhou, Influence of stress softening on energy-absorption capability of polymeric foams. Mater. Design, 32(3) (2010), 1167–1176.
22.
EsatOzturk Umud, and GunayAnlas, Finite element analysis of expanded polystyrene foam under multiple compressive loading and unloading. Mater. Design, 32(2) (2011), 773–780.
23.
YangL.M., ShimV.P.W., A visco-hyperelastic constitutive description of elastomeric foam. Int J. Impact Eng., 30(8–9) (2004), 1099–1110.
24.
SchrodtM., BenderothG., KuhhornA., Hyperelastic Description of Polymer Soft Foams at Finite Deformations. Technische Mechanik, 25(3–4) (2005), 162–173.
25.
OgdenR.W.Large deformations isotropic elasticity-on the correlation of theory and experiment for incompressible rubberlike solids. In: Proc. Roy. Soc. London A, 326 (1972), 565–584.
26.
HillR., Aspects of invariance in solid mechanics. Adv. Appl. Mech., 18 (1978), 1–75.
27.
StorakersB., On material representation and constitutive branching in finite compressible elasticity. J. Mech. Phy. Solids, 34(2) (1986), 125–145.
28.
LiC.Y., LuaJ., A hyper-viscoelastic constitutive model for polyurea. Mater. Lett., 63(11) (2009), 877–880.
29.
JulieDiani, BrunoFayolle, PierreGilormini, A review on the Mullins effect. Eur. Polym. J., 45(3) (2009), 601–612.
30.
VandenbrouckeA., LaurentH., AitHocine N.A Hyperelasto-Visco-Hysteresis model for an elastomeric behaviour: Experimental and numerical investigations. Comp. Mater. Sci., 48 (2010), 495–503.
31.
DrozdovA.D., Mullins’ effect in thermoplastic elastomers: Experiments and modeling. Mech. Res. Commun., 36(4) (2009), 437–443.
32.
DrozdovA.D., Mullins’ effect in semicrystalline polymers. Int. J. Solids Struct., 46(18–19) (2009), 3336–3345.
33.
RamkumarA., KannanK., and GnanamoorthyR., Experimental and theoretical investigation of a polymer subjected to cyclic loading conditions. Int. J. Eng. Sci., 48(2) (2010), 101–110.
34.
zhupingHuang, Fundamental of Continuum Mechanics.Higher Education Press. 2003.
35.
SimoJ.C., On a fully three-dimensional finite-strain viscoelastic damage model: formulation and computational aspects. Comput. Meth. Appl. Mech. Eng., 60 (1987), 153–173.
36.
JavierBonet, and Wood RichardD., Nonlinear continuum mechanics for finite element analysis. 2nd ed. Cambridge University Press; 2008.
