Sage Journals: Discover world-class research

Abstract

Since their discovery in the early 40's extruded polystyrene foams (XPS) have been produced with various organic and inorganic blowing agents, and are now widely used as thermal insulators in building and construction. Blowing agent regulations have forced foam suppliers to look for new polymer - blowing agent - additive combinations. These must deliver high performance insulation, but must not compromise on high mechanical strength, foam integrity, and moisture resistance.

This paper focuses on the thermal resistance of XPS blown with zero-ODP blowing agent (hydrofluorocarbon HFC-134a) and with carbon dioxide. IR-blockers such as carbon black and graphite reduce the thermal conductivity of CO₂ blown XPS between 1 and 3×10^-3 W/m.K depending on the concentration of IR-attenuators. Properties of a new XPS product using CO₂ with IR blockers are presented. This product is CE certified and fulfills the requirements of the European XPS product standard DIN EN 13164.

Get full access to this article

View all access options for this article.

References

Energy Efficiency, Climate Change and Insulation, Source: Eurima.org

Enkvist

Per-Anders

, Nauclér

Tomas

, and Rosander

Jerker

, “A cost curve for greenhouse gas reduction, A cost curve for greenhouse gas reduction”, McKinsey Study, Feb 2007.

Directive 2010/31/EU, European Parliament of the Council, “Energy performance of buildings”, 19 May 2010.

Gueret

, Dussaux

, and Georges

, CSTB Report HO 02-025, April 10, 2002.

, and Paquet

, “An Evaluation of the Thermal Conductivity of Extruded Polystyrene Foam Blown with HFC-134a or HCFC-142b”, J. Cel. Plas, 40, (May 2004) 205–228,

Pekala

R.W.

, Alviso

C.T.

, Lu

, Gross

, and Fricke

, “New organic aerogels based upon a phenolic-furfural reaction”, J. Non-Cryst. Solids, 188, (1995), 34–40.

Rigacci

, Maréchal

J.C.

, Repoux

, Moreno

, and Achard

, “Preparation of polyurethane-based aerogels and xerogels for thermal superinsulation”, J. Non-Cryst. Solids, 350, (2004), 372–378.

Costeux

, Vo

, and Hood

, “Long term performance of Insulating Foams”, Foams 2010 SPE Conference, Seattle, Sept-2010

Glicksman

L.R.

, Schuetz

M.A.

, and Sinofsky

, “Radiation heat transfer in foam insulation”, Int. J. Heat Mass Transfer, 30(1) (1987) 187–197.

10.

Placido and

, Arduini-Schuster

M.C.

, and Kuhn

, “ Thermal properties predictive model for insulating foams”, Infrared Physics and Technology, 46 (2005), 219–231.

11.

Glicksman and

L.R.

, Mozgowiee

, and Torpey

, “Radiation heat transfer in foam insulation”, Proceedings of the Ninth International Heat Transfer Conference, Jerusalem, pages 379–384, 1990.

12.

Campo-Arnáiz and

R.A.

, Rodríguez-Pérez and

M.A.

, Calvo

, and de Saja

J.A.

, “Extinction coefficient of polyolefin foams”, J. of Pol Sci Part B: Polymer Physics, 43 (2005), 1608–1617.

13.

Kaemmerlen

, Vo

, Asllanaj

, Jeandel

, and Baillis

, “ Radiative properties of extruded polystyrene foams: Predictive model and experimental results”, Journal of Quantitative Spectroscopy & Radiative Transfer, 111 (2010), 865–877.

14.

McIntire

O.R.

, and Kennedy

R.N.

, “Styrofoam for Low Temperature Insulation”, Chemical Engineering Process, 44 (1948), 727–730.

15.

Moore

, Styrene polymers, Encyclopedia of Polymer Science and Engineering, 16 (1989), 113.

16.

Lobo

, and Cohen

, “Measurement of Thermal Conductivity of Polymer Melts by the Line-Source Method”, Polym. Eng. Sci., 30(2) (1990), 65–70.

17.

Handbook of Tables for Applied Engineering Services, 2nd edition, page 180

18.

XENERGY Data, http://www.dowxenergy.eu/eu/deu/de/

19.

Bunge

, and Merkel

, “ Polystyrol-Extruderschaum mit verbesserten wärmetechnischenEigenschaften – Entwicklung, Prüfung und Anwendung”, Bauphysik, 67–72, February 2011.

Advances in Thermal Insulation of Extruded Polystyrene Foams

Abstract

Get full access to this article

References