Sage Journals: Discover world-class research

Abstract

This paper presents an experimental study on manufacture and characterization of an insulating foam coating in the coaxial cables where a physical blowing agent (butane) is used. Coaxial cables with foam insulator are widely used in communication industries. The insulating foam plays a key role in the attenuation properties of the coaxial cables. In this research work, an extrusion setup was prepared to produce foam insulated coaxial cable using butane as the physical foaming agent. The effect of die geometry (die gap and die outlet diameter) on foam morphology and loss-attenuation were investigated using a blend of LDPE (90%)-HDPE (10%) as the main material. The results show that an acceptable low loss-attenuation is achievable via using a polyethylene compound and adjusting processing parameters.

Get full access to this article

View all access options for this article.

References

Masahiro

, Takanori

, Kimihiro

, Minoru

, and Yasuyuki

, “Development of low-loss highly foamed polyethylene coaxial cable (LHPX) for base station for cellular phone” Hitachi Cable Review, No. 22, (August 2003).

Wilkenloh

F.N.

, Wilson

P.A.

, and Fox

S.A.

“Coaxial cable with improved properties and process of making same” U.S. Patent 4,104,481, (1978).

Boysen

R.L.

, and Lebanon

N.J.

, “Coaxial cables with improved properties”, U.S. patent, 3,968,463, (1976).

Carlson

, “Radio frequency cables-an update”, Wire & Cable Technology International, (May 2001).

Levy

Sidney

, Editor; Plastics Extrusion Technology Handbook; Industrial Press Inc., New York, 1981.

Nazari Marvian

, Behravesh

A.H.

, and Golzar

, “Extrusion foam coating of coaxial cable using chemical blowing agent, Cellular Polym., 27 1 (2008).

Behravesh

A.H.

, “Extrusion Processing of Low-Density Microcellular Foam”, Ph.D Thesis, University of Toronto, (1997).

Fox

Steve Allen

Ahren, deceased, Micheal, “Coaxial cable”, U.S. Patent, 6,037,545, (2000).

Moe

A.N.

, and Garner

M.A.

; “Method of making coaxial cable” U.S. Patent 5,926,949, (1999).

10.

Bufanda

D.E.

, and Andenaerde

, “Microcellular foam dielectric for use in transmission lines”, U.S. Patent 6,956,068, (2005).

11.

Naguib

H.E.

, Park

C.B.

, Panzer

, and Reichelt

, “Strategies for achieving ultra low-density PP foams,” Polymer Engineering and Science, 42(7) (July 2002) 1481–1492,.

12.

Cogen

Jeffrey

, Morris

Maki

, and Mary

Sandra Germaine

, “Coaxial cable” U.S. Patent 6,592,626, (2003).

13.

Fox

S.A.

, and Ahern

, “Coaxial cable”, U.S. Patent 6,282,778, (2001).

14.

Perelman

R.D.

, “Corrugated coaxial cable”, U.S. Patent 4,368,350, (1983).

15.

Behravesh

A.H.

, Park

C.B.

, and Venter

R.D.

, “Approach to the production of low-density, microcellular foam in extrusion”, SPE ANTEC Technical Papers, 44 (1998), 1958–1967.

16.

Behravesh

A.H.

, Park

C.B.

, and Venter

R.D.

, “Extrusion of low-density microcellular HIPS foams using CO₂”, Cellular and Microcellular Materials, Kumar

, and Sealer

K.A.

, eds., ASME, New York, pp. 47–64, (1996).

17.

Park

C.B.

, thesis

Ph.D.

, “The Role of Polymer/Gas Solusion in Continuous Processing of Microcellular Polymers”, Mech. Eng. Dep., Massachusetts Institute of Technology, (1993).

18.

Ragazzini

, and Colombo

, “Screw extruder for thermoplastic synthetic foam”, U.S. patent, 4,222,729, (1980).

19.

Behravesh

A.H.

, Park

C.B.

, Pan

, and Venter

R.D.

, “Effective suppression of cell coalescence during shaping in the extrusion of microcellular HIPS foams”, 212th National ACS Meeting, Polymer Preprints, 37(2) (1996), 767–768.

20.

Park

C.B.

, Behravesh

A.H.

, and Venter

R.D.

, “Chapter 8 - A strategy for suppression of cell coalescence in the extrusion of microcellular HIPS foams”, in: Polymeric Foams: Science and Technology, Khemani

, ed., ACS, Washington, pp. 115–129, (1996).

21.

Wilkes

G.R.

, Kisner

R.D.

, and Stimler

J.J.

, “Foamable composition using high density polyethylene”, U.S. patent, 6,069,183, (2000).

22.

Park

C.B.

, “In Polymeric Foams and Foam Technology“, 2nd ed., Klempner

, Sendijarevic

Ed., Hanser Publishers, Chap. 8, Munich, (2004).

Extrusion Foam Coating of Coaxial Cables using Butane as Physical Blowing Agent

Abstract

Get full access to this article

References