Mechanical Behaviour at Low Strains of LDPE Foams with Cell Sizes in the Microcellular Range: Advantages of Using These Materials in Structural Elements

Abstract

This paper presents the production method and the compressive mechanical response at low strains for a collection of polyethylene foams with high densities and cell sizes in the microcellular range. The materials were produced using an improved compression moulding technique that allows and independent control of density and cell size.

The materials had a relative density between 0.27 and 0.92, an homogeneous and multi-structured cellular structure with dense skin and foamed core and cell sizes in the range 30 to 100 microns. The Young's modulus decreased with density. For relative densities higher than 0.7, the reduced Young's modulus of the foams was higher than that of the solid. In addition, it has been proved that variations in the cell size at constant density did not influence the Young's modulus. The advantages of using these materials for the production of plastic pipes have been analysed. In comparison with a solid pipe a reduction of the weight of foamed pipes loaded in compression of up to 40% can be reached.