Abstract
This paper reports the development of an improved three-dimensional computer simulation model for evaluation of ultrasonic imaging systems. This model was used to successfully evaluate a signal processing method for improving lesion detection in ultrasound imaging. Linear processing of the rf signal amplitudes from a limited region of tissue was compared with the logarithmic compression employed by most commercial scanners. Two lesions were simulated by spherical distributions of scatterers having backscatter coefficients greater than the scatterers in the surrounding medium. Linear processing improved the differential contrast by a factor of about two.
The simulation is based on the three-dimensional distribution of acoustic frequency spectra in a transducer beam and integration of scattered pulses from a corresponding three-dimensional array of scatterers. The simulation reported in previous papers depended upon physical measurement of the impulse response of a transducer. An original contribution described briefly herein, and in more detail in a companion article, is the addition of a model of the transducer's pulse waveform generation. Another new addition is the definition of a specific lesion detection task for objective assessment of a change in image quality following perturbation of some system parameter.
Keywords
Get full access to this article
View all access options for this article.