The Wedged Transducer — A Transducer Design for Broad Band Characteristics

Abstract

This paper presents a method of increasing the bandwidth of transducers feeding low acoustic impedance loads such as fluids and of electrically matching them over the full bandwidth. It consists of interposing between the transducer and the actual load, a wedge made out of a material having the desired acoustic impedance. The wedge angle is chosen such that no reflected wave from the wedge-load interface can return to the transducer. In this manner, the effective load seen by the transducer is that of the wedge itself, regardless of the actual load. The appropriate electrical matching is achieved by means of a hybrid band pass filter containing both electrical and mechanical components, with the transducer as an integral part.

Experimental results on a 4-inch diameter PZT-4 transducer, coupled to water through a brass wedge, demonstrate a bandwidth of 75 percent and an insertion loss of 8.5 dB, well in accordance with theory. Without the wedge, the bandwidth would be only 3.2 percent.

Keywords

Broadband electrical matching piezoelectric tranducers PZT wedge coupling

Get full access to this article

View all access options for this article.

References

Kossoff

, The effect of backing and matching on the performance of Piezoelectric ceramic transducers, IEEE Trans. Sonics Ultrasonics SU-13, 20–30 (1966).

Auld

B. A.

DeSilets

C. S.

Kino

G. S.

, A New Acoustic Array for Acoustic Imaging, 1974 IEEE Ultrasonic Symposium Proceedings, pp. 24-27 (IEEE Cat. No. 74, CH0896-1 SU).

Goll

H. J.

Auld

B. A.

, Multilayer impedance matching schemes for broadbanding of water loaded piezoelectric transducers and high Q electric resonators, IEEE Trans. Sonics Ultrasonics Su-22, 52–53 (1975).

DeSilets

C. S.

Fraser

J. D.

Kino

G. S.

, The design of efficient broad band piezoelectric transducers, IEEE Trans. Sonics Ultrasonics SU-25, 115–125 (1978).

Lynnworth

L. C.

, Ultrasonic Flowmeter Cell Designs for Liquids, in 1974 IEEE Ultrasonic Symposium Proceedings, pp. 678-681 (IEEE Cat. No. 74, CH0896-1 SU).

Korpel

, Acoustic Impedance Matching, U. S. Patent No. 3,383,631, May, 1968.

Mason

W. P.

, Physical Acoustics, Vol. 1, Part A, p. 190 (Academic Press, New York, 1964).

Pinnow

D. A.

Van Uiter

L. G.

Warner

A. W.

Bonner

W. A.

, Lead molybdate: a melt-grown crystal with high figure of merit for acousto-optic device applications, Appl. Phys. Lett. 15, 83–86, (1966).

Alphonse

G. A.

, Broadband acoustoptic deflectors: new results, Appl. Opt. 1, 201–207 (1975).

10.

Brekhovskikh

L. M.

, Waves in Layered Media, pp. 28–35, (Academic Press, New York, 1960.).

11.

Baerwald

H. G.

, A limit theorem on passive reactance two-ports with constraints, IRE Intern. Conv. Record 9, Part 4, 244 (1961).

12.

Skilling

H. H.

, Electrical Engineering Circuits, 2nd Ed. Chap. 19, (Wiley, New York, 1966).