Heavy oil and oil sands deposits constitute an important resource, with in-place estimates varying between 600 × 109 and 980 × 109 m3. These deposits are mostly concentrated in Canada, the US and Venezuela. The gradual depletion of conventional oil reserves is leading to a greater interest in heavy oil recovery.
This paper presents on overview of heavy oil characteristics, worldwide deposits and recovery methods, with special emphasis on the heavy oils and oil sands of Canada. Thermal recovery techniques such as cyclic steam stimulation, steamflooding and in-situ combustion have been generally more successful than non-thermal methods. The principal thermal recovery processes are discussed in detail. Reservoir characteristics influencing the applicability of these processes are mentioned, and possible operational problems are outlined.
Most of the Canadian heavy oils and oil sands deposits occur in the provinces of Alberta and Saskatchewan. Selected recovery projects currently in operation are described, outlining modifications to the basic process, problems encountered and range of success.
Get full access to this article
View all access options for this article.
References
1.
AdamsR. H.KhanA. M. (1969). Cyclic steam injection project performance analysis and some results of a continuous steam displacement pilot, Journal of Petroleum Technology, January, 1969, 95–100.
2.
AlikhanA. A.AliS. M. Farouq (1983). Current status of nonthermal heavy oil recovery, SPE 11846, presented at the Rocky Mountain Regional Meeting, Salt Lake City, Utah, May 23–25, 1983.
3.
AmelinI. D.SergeevA. I.GeikhmanG. M. (1969). Thermal stimulation of formation by a moving combustion front (Experimental industrial tests on the Pavlova Gora reservoir) (in Russian), Neftyanoe Khozaistvo, January, 1969, p. 41.
4.
Anon. (1959). Heavy crude is flooded in Canada, Petroleum Week, April 17, 1959, 27–8.
5.
Anon. (1964). The heat's on viscous crude, Oil and Gas Journal, October 19, 1964, p. 75.
6.
Anon. (1965). Success leads to fireflood expansion, Oil and Gas Journal, April 19, 1965, p. 72.
7.
Anon. (1965). Fireflood peps up old Arkansas field, Oil and Gas Journal, October 11, 1965, p. 100.
8.
Anon. (1966). Will thermal flood boom rival gold rush?, California Oil World, February, 1966, p. 6.
9.
Anon. (1969). Fireflood successful after waterflood, Oil and Gas Journal, October 6, 1969, p. 102.
10.
Anon. (1978). Submission to ERCB by Esso on the Cold Lake project, Vol. II, Section 4, Calgary.
11.
Anon. (1984). Shell gets green light for Peace River expansion, Oilweek, November 19, 1984, p. 8–9.
12.
Anon. (1985). Esso adds four more phases to booming Cold Lake project, Enhanced Recovery Week, November 4, 1985, p. 1.
13.
Anon. (1985). Oxygen firefloods gaining acceptance, Oilweek, March 11, 1985, p. 22.
14.
BirdwellB. F.SubtF. G., & SilberbergI. H. (1964). A survey of thermal recovery operations in Texas oil fields, Texas Petroleum Research committee, Austin.
15.
BottR. C. (1967). Cyclic steam project in a virgin tar reservoir, Journal of Petroleum Technology, May, 1967, 585–591.
16.
BucklesR. S. (1979). Steam stimulation heavy oil recovery at Cold Lake, Alberta, SPE 7994, presented at the California Regional Meeting, Ventura, California, April 18–20, 1979.
17.
BurkeR. G. (1965). Combustion project is making a profit, Oil and Gas Journal, January 18, 1965, p. 44.
18.
CofferH. F.DewJ. N. (1964). Current progress of field operations using newer recovery methods, paper presented at Institute on Economics of the Petroleum Industry, Dallas, March, 1964.
19.
deNeversN. (1966). Carbonated waterflooding, World Oil, September, 1966, 93–6.
20.
DietrichW. K.WillhiteG. P. (1966). Steam soak results—Sisquoc pool, Cat Canyon oil field, Santa Barbara county, Petroleum Industry Conference on Thermal Recovery, Los Angeles, June 6, 1966, 61–68.
21.
DietzmanW. D.CarralesM.Jr., & JirikC. J. (1965) Heavy crude oil reservoirs in the United States: A survey, B. of Mines Inf. Circ.8263.
22.
DillaboughJ. A.PratsM. (1974). Recovering bitumen from Peace River deposits, Oil and Gas Journal, November 11, 1974, 186–97.
23.
DoscherT. M.LabelleR. W.SawatskyL. H.ZwickyR. W. (1964). Steam drive successful in Canada's oil sands, Petroleum Engineer, January, 1964, 71–8.
24.
DoscherT. M. (1967). Technical problems in in-situ methods for recovery of bitumen from tar sands, Panel Discussion13(6), 7th World Petroleum Congress, Mexico City (April, 1967).
25.
ElliotC. E.FerrerJ. (1974). Recovery of viscous oils from stratified reservoirs using polymer solutions, SPE 4846, presented at the SPE-European Spring Meeting, Amsterdam, May 29–30, 1974.
26.
EmeryM. N. (1966). Small steam flood works for independent, Petroleum Engineer, September, 1966, 63–7.
27.
AliS. M. Farouq (1972). A current appraisal of in-situ combustion field tests, Journal of Petroleum Technology, April, 1972, 477–86.
28.
AliS. M. Farouq (1974a). Heavy oil recovery—principles, practicality, potential, and problems, SPE 4935, presented at the Rocky Mountain Regional Meeting, Billings, Montana, May 15–16, 1974.
29.
AliS. M. Farouq (1974b) Current status of steam injection as a heavy oil recovery method, Journal of Canadian Petroleum Technology, January-March, 1974, 54–68.
30.
AliS. M. Farouq (1976). Non-thermal heavy oil recovery methods, SPE 5893, presented at the Rocky Mountain Regional Meeting, Casper, Wyoming, May 11–12, 1976.
31.
AliS. M. Farouq (1977). Multiphase, multidimensional simulation of in-situ combustion, SPE 6896, presented at the 52nd Annual Fall Meeting, Denver, Colorado, October 9–12, 1977.
32.
AliS. M. FarouqMeldauR. F. (1979). Current steamflood technology, Journal of Petroleum Technology, October, 1979, 1332–42.
33.
AliS. M. Farouq (1983). Effect of bottom water and gas cap on thermal recovery, SPE 11732, presented at the 53rd Annual California Regional Meeting, Ventura, California, March 23–25, 1983.
34.
GatesC. F., & RameyH. J.Jr. (1958). Field results of South Belridge thermal recovery experiment, Trans. AIME, 213, 236–44.
35.
GatesC. F.SklarI. (1971). Combustion as a primary recovery process—Midway Sunset field, Journal of Petroleum Technology, August, 1971, 981–86.
36.
GatesC. F.BrewerS. W. (1975), Steam injection into the D and E zone, Tulare formation, South Belridge field, Kern County, California, Journal of Petroleum Technology, March, 1975, 343–8.
37.
GreenK. B. (1967). The fireflood: Cox Penn sand, Oil and Gas Journal, July 17, 1967, p. 66.
38.
HallA. L.BowmanR. W. (1973). Operation and performance of the slocum thermal recovery project, Journal of Petroleum Technology, April, 1973, 402–8.
39.
HardyW. C.FletcherP. B.ShepardJ. C.DittmanE. W.ZadowD. W. (1972). In-situ combustion performance in a thin reservoir containing high-gravity oil, Journal of Petroleum Technology, February, 1972, 199–208.
40.
HarvieJ. D.NichollsJ. H.WinestockA. G. (1972). The outlook for Canadian oil sands development, presented at the 71st National Meeting of American Institute of Chemical Engineers, Dallas, Texas, February 20–23, 1972.
41.
InksC. G.LahringR. I. (1968). Controlled evaluation of a surfactant in secondary recovery, Journal of Petroleum Technology, November, 1968, 1320–4.
42.
JamesonC. E. (1973). The Lloydminster heavy oil area, Journal of Canadian Petroleum Technology, July-September, 1973, 17–19.
43.
JenkinsG. R.KirkpartickJ. W. (1978). Twenty years operations of an in-situ combustion project, presented at the 29th Annual Technical Meeting of the Petroleum Society of CIM, Calgary, Alberta, June 13–16, 1978.
44.
JenningsH. Y.Jr.JohnsonC. E.Jr., & McAuliffeC. D. (1974). A caustic waterflooding process for heavy oils, Journal of Petroleum Technology, December, 1974, 1344–52.
45.
JohnsonC. E.Jr. (1975). Status of caustic and emulsion methods, SPE 5561, presented at the 50th Annual Fall Meeting, Dallas, Texas, September 28-October 1, 1975.
46.
KempE. M. (1984). Cold Lake project: the resource, the particular production techniques, and related challenges, Proceedings of the Saskatchewan Heavy Oil Conference, November 28–30, 1984.
47.
KnightB. L.RhudyJ. S. (1975). Recovery of high viscosity crudes by polymer flooding, presented at the 26th Annual Meeting of CIM, Banff, Alberta, June 11–13, 1975.
48.
LeachR. O.WagnerO. R.WoodH. W.HarpkeC. F. (1962) A laboratory and field study of wettability adjustment in waterflooding, Trans AIME, 225, 206–212.
49.
LongR. J. (1965). Case history of steam soaking in the Kern River field, California, Journal of Petroleum Technology, September, 1965, 989–93.
50.
LozanskiW. R.MartinI. (1970). Taber South-Canada's first polymer flood, Paper 7011, presented at the 21st Annual Meeting of CIM, Calgary, Alberta, May 6–8, 1970.
51.
McAuliffeC. D. (1973). Crude-oil-in-water emulsions to improve fluid flow in an oil reservoir, Journal of Petroleum Technology, June, 1973, 721–6.
52.
MillerK. A. (1985). Interim progress report on Husky's Pikes Peak steam pilot, presented at the First Annual Technical Meeting of the South Saskatchewan Section of the Petroleum Society of CIM, Regina, Saskatchewan, September 15–17, 1985.
53.
NichollsJ. H.LuhningR. W. (1977). Heavy oil sand in-situ pilot plants in Alberta (past and present), Journal of Canadian Petroleum Technology, July-September, 1977, 50–61.
54.
OefeleinF. H.WalkerJ. W. (1964). California flood yields profitable recovery of heavy oil from multi-layered reservoir, Journal of Petroleum Technology, May, 1964, 509–14.
55.
OganovK. A. (1967). Fundamentals of thermal stimulation of oil reservoirs (In Russian), Nedra Press, Moscow.
56.
ParrishD. R.RauschR. W.BeaverK. W.WoodH. W. (1962). Underground combustion in the Shannon Pool, Wyoming, Journal of Petroleum Technology, February, 1962, 197–205.
57.
PayneR. W.ZambranoG. (1965). Cyclic steam injection helps raise Venezuela production, Oil and Gas Journal, May 24, 1965, 78–82.
58.
PetcoviciV. (1970). Etude complexe sur l'explotacion par combustion in situ du gisement d'Huile de Suplacu de Barcau (In Romanian), ICPTG, Cimpina, Romania.
59.
PhizackerleyP. H.ScottL. O. (1967). The major tar sand deposits of the world, Panel Discussion 13, 7th World Petroleum Congress, Mexico (1967).
60.
PrasadB. D.LilloH. O. (1980). Overview of oil sands development and its role in meeting Canada's energy needs, paper presented at the International Mining Exhibition and Conference, Calgary, Alberta, August 26–28, 1980.
61.
PratsM. (1978). Peace River steam drive scaled model experiments, oil sands of Canada-Venezuela, Canadian Institute of Mining and Metallurgy, Edmonton, Alberta (1978) pp. 346–63.
62.
PriceE. O.McLarenG. R. (1966). Steam cyclic operations at Midway-Sunset sections 15A and 23A, Petroleum Industry Conference on Thermal Recovery, Los Angeles, California, June 6, 1966, pp. 69–74.
63.
PursleyS. A.GrahamH. L. (1975). Borregos field surfactant pilot test, Journal of Petroleum Technology, June, 1975, 695–700.
64.
ReddyG. S.AdamsD. M.MeldauR. F. (1982). Summary of enhanced oil recovery pilots for oil sands and heavy oil in Canada, second UNITAR Conference, Caracas, Venezuela, 1982.
65.
SimmC. (1972). Improved firefloods may cut steam's advantages, World Oil, March, 1972, p. 59–62.
66.
SimonR.GraveD. J. (1965). Generalized correlations for predicting solubility, swelling and viscosity behavior of CO2-crude oil systems, Journal of Petroleum Technology, January, 1965, 102–6.
67.
SlaterG. E.AliS. M. Farouq (1970). Two dimensional polymer flood simulation, SPE 3003, presented at the 45th Annual Fall Meeting, Houston, Texas, October 4–7, 1970.
68.
SuttonE. (1963). Waterflood performance in a high viscosity oil reservoir, Journal of Petroleum Technology, December 1963, 1281–4.
69.
UstickR. E.HillhouseJ. D. (1967). Comparison of polymer flooding and waterflooding at Huntington Beach, California, Journal of Petroleum Technology, September, 1967, 1103–11.
70.
WagnerO. R.LeachR. O. (1959). Improving oil displacement efficiency by wettability adjustment, Trans. AIME, 216, 65.
71.
WebberH. J. (1967). The oil sands of Alberta, presented at the 18th Annual Technical Meeting of the Petroleum Society of CIM, Banff, Alberta, May, 1967.
72.
WelkerJ. R.DunlopD. D. (1963). Physical properties of carbonated oils, Journal of Petroleum Technology, August, 1963, 873–6.
73.
WilsonL. A.RootP. J. (1966). Cost comparison of reservoir heating using steam or air, Journal of Petroleum Technology, February, 1966, 233–9.
74.
WinestockA. G. (1973). Developing a steam recovery technology, presented at Oil Sands Symposium, Can. Soc. Petr. Geol., Calgary, Alberta, September 5–9, 1973.
75.
YoelinS. D. (1970). The TM-sand steam stimulation project, Huntington Beach offshore field—A remarkable example of a heavy oil reservoir responding to the cyclic steam injection process, SPE 3104, presented at the 45th Annual Fall Meeting, Houston, Texas, October 4–7, 1970.
