Abstract
The dynamic thermal behaviour of a highly insulated dwelling and a monovalent air to water heat pump heating system have been simulated in combination. The building model employs the finite difference method to predict time and spatially dependent energy flows resulting from meteorological stimuli, ventilation and occupancy. Heat pump behaviour is simulated using static performance expressions and also two dynamic models with similar steady state output but different transient characteristics. The dynamic models are intended to represent the range of transient heat pump performance observed in experimental studies. Simulations of the building and heating system have been performed over a range of meteorological conditions by sampling a real weather data set at regular intervals throughout a heating season. Results indicated wide variations in the continuous heating energy demand pattern for a highly insulated dwelling. This caused the heating system to operate at low load for most of the heating season and placed greater importance on the dynamic behaviour of the heat pump at part load. The predicted fall in seasonal performance caused by the cycling of the heating system at part load was between 3 and 7 per cent, depending on the assumed dynamic behaviour of the heat pump.
Get full access to this article
View all access options for this article.
