The integration of solid-solid phase change material with micro-channel flat plate heat pipe-based BIPV/T

Abstract

In this paper, the influence of the solid-solid phase change material on the novel micro-channel flat-plate heat-pipe–based building integrated photovoltaic/thermal system has been investigated, which has been expected to store the excess heat, enhance the overall efficiency of the system and maintain the stable photovoltaic temperatures. The proposed system was divided into two parts, i.e. the outdoor part formed by flat-plate glass, photovoltaic panel, micro-channel flat-plate heat pipes, solid-solid phase change material layer and insulated material, and indoor part including the storage tank, water pump and storage batter. The experiments were conducted at the Guangdong University of Technology, China, to investigate the thermal and electrical performance of the proposed system. When the simulated radiation was at 300 W/m² and water flow rate was at 600 L/h, the maximum average thermal, electrical and overall efficiency were found at 52.9%, 7.9% and 60.8%, respectively, when the xenon lamps were turned on, and the maximum average efficiency of 86.6% were found when the xenon lamps were turned off, indicating the most appropriate working condition of the proposed system due to the thermal storage and release of the solid-solid phase change material during the system operation. Compared with the previous studies of the conventional building integrated photovoltaic/thermal systems, it was found that the overall efficiency of the system averagely increased 5–30% and the daily water temperature difference of the system averagely increased 1.8–10.5℃, indicating that the solid-solid phase change material can significantly increase the thermal efficiency of the system.

Practical application The proposed micro-channel-flat-plate-heat pipe based BIPV/T (MCFPHP-BIPV/T) system with SS-PCM will be potentially used in buildings to provide amount of electricity and thermal energy. The generated electricity will be used by the residential electrical devices or connected to the grid, and the thermal energy can be used for hot water, even for space heating and cooling. The proposed building-integrated system can be assisted in realising the targets of energy saving and carbon-emission-reduction in buildings.

Keywords

Solid-solid phase change material micro-channel flat-plate heat pipes building integrated photovoltaic/thermal performance investigation

Get full access to this article

View all access options for this article.

References

Tyagi

Buddhi

. PCM thermal storage in buildings: a state of art. Renew Sustain Ener Rev 2017; 11: 1146–1166.

Mohamed

Al-Sulaiman

Ibrahim

et al.

A review on current status and challenges of inorganic phase change materials for thermal energy storage systems. Renew Sustain Ener Rev 2017; 70: 1072–1089.

. A review of intercalation composite phase change material: Preparation, structure and properties. Renew Sustain Ener Rev 2012; 16: 2094–2101.

Regin

Solanki

Saini

. Heat transfer characteristics of thermal energy storage system using PCM capsules: a review. Renew Sustain Ener Rev 2008; 12: 2438–2458.

Abhat

. Low temperature latent heat thermal energy storage: heat storage materials. Solar Ener 1983; 30: 313–332.

Lin

Jia

Alva

et al.

Review on thermal conductivity enhancement, thermal properties and applications of phase change materials in thermal energy storage. Renew Sustain Ener Rev 2017; 82: 2730–2742.

Kośny

. PCM-enhanced building components: an application of phase change materials in building envelopes and internal structures, Berlin: Springer, 2015.

Tatsidjodoung

Pierrès

Luo

. A review of potential materials for thermal energy storage in building applications. Renew Sustain Ener Rev 2013; 18: 327–349.

Zhang

et al.

Study of solid–solid phase change of (n-CnH_2n+1NH₃)₂ MCl₄ for thermal energy storage. Thermochimica Acta 1999; 326: 183–186.

10.

Fallahi

Guldentops

Tao

et al.

Review on solid-solid phase change materials for thermal energy storage: molecular structure and thermal properties. Appl Thermal Eng 2017; 127: 1427–1441.

11.

Khan

Ghafoor

. A review of performance enhancement of PCM based latent heat storage system within the context of materials, thermal stability and compatibility. Ener Conversion Manage 2016; 115: 132–158.

12.

Huang

Alva

Jia

et al.

Morphological characterization and applications of phase change materials in thermal energy storage: A review. Renew Sustain Ener Rev 2017; 72: 128–145.

13.

Wang

Qiu

Yang

et al.

Applications of solar water heating system with phase change material. Renew Sustain Ener Rev 2015; 52: 645–652.

14.

Tong

Tan

Liu

et al.

Thermodynamic investigation of a solid-solid phase change material: 2-amino-2-methyl-1, 3-propanediol by calorimetric methods. Ener Conversion Manage 2010; 51: 1905–1910.

15.

Kong

Liu

et al.

A facile synthesis of solid-solid phase change material for thermal energy storage. Appl Thermal Eng 2017; 117: 622–628.

16.

Alkan

Günther

Hieble

et al.

Polyurethanes as solid–solid phase change materials for thermal energy storage. Solar Ener 2012; 86: 1761–1769.

17.

Wang

Liu

et al.

Preparation and characterization of melamine/formaldehyde/polyethylene glycol crosslinking copolymers as solid–solid phase change materials. Solar Ener Mater Solar Cell 2014; 127: 92–97.

18.

Islam

Pandey

Hasanuzzaman

et al.

Recent progresses and achievements in photovoltaic-phase change material technology: a review with special treatment on photovoltaic thermal-phase change material systems. Ener Conversion Manage 2016; 126: 177–204.

19.

Yang

Zhang

et al.

Using phase change materials in photovoltaic systems for thermal regulation and electrical efficiency improvement: a review and outlook. Renew Sustain Energy Rev 2015; 43: 1273–1284.

20.

Browne

Norton

McCormack

. Phase change materials for photovoltaic thermal management. Renew Sustain Ener Rev 2015; 47: 762–782.

21.

Guldentops

Dessel

. Building envelope systems with transparent solid-solid phase changing material. AEI 2017, pp. 247–265.

22.

Qiu

Zhao

et al.

Experimental investigation of the energy performance of a novel micro-encapsulated phase change material (MPCM) slurry based PV/T system. Appl Ener 2016; 165: 260–271.

23.

Wang

Zhang

Wang

et al.

Experimental investigation of the performance of the novel HP-BIPV/T system for use in residential buildings. Ener Build 2016; 130: 295–308.

24.

Mousavi

Kasaeian

Shafii

et al.

Numerical investigation of the effects of a copper foam filled with phase change materials in a water-cooled photovoltaic/thermal system. Ener Conversion Manage 2018; 163: 187–195.

25.

Zhang

Yang

et al.

Performance analysis of a heat pipe PV/T system with different circulation tank capacities. Appl Thermal Eng 2015; 87: 89–97.

26.

Zhou

Zhao

et al.

Clear-days operational performance of a hybrid experimental space heating system employing the novel mini-channel solar thermal & PV/T panels and a heat pump. Solar Ener 2017; 155: 464–477.

27.

Pei

et al.

Outdoor overall performance of a novel air-gap-lens-walled compound parabolic concentrator (ALCPC) incorporated with photovoltaic/thermal system. Appl Ener 2015; 144: 214–223.

28.

Nowzari

Aldabbagh

LBY

Egelioglu

. Single and double pass solar air heaters with partially perforated cover and packed mesh. Energy 2014; 73: 694–702.

29.

Debbarma

Sudhakar

Baredar

. Thermal modelling, exergy analysis, performance of BIPV and BIPVT: a review. Renew Sustain Ener Rev 2017; 73: 1276–1288.

30.

Wang

Huang

Chen

et al.

Experimental investigation of the novel BIPV/T system employing micro-channel flat-plate heat pipes. Build Serv Eng Res Technol. Epub ahead of print 17 January 2018.