Sodium acetate–urea composite phase change material used in building envelopes for thermal insulation

Abstract

Integrating phase change material with building envelopes is an effective way to reduce cooling or heating loads, improve indoor thermal comfort and save building energy consumption. In this paper, the composite phase change material of sodium acetate and urea is prepared and its thermal–physical properties with different mixing mass ratios are investigated through experiment and T-history method. Moreover, the heat transfer model of building envelopes with phase change material is established and different phase change material locations in external walls for thermal insulation are compared based on integrated uncomfortable degree. The results show that (1) with rising urea mass fraction, both phase change temperature and latent fusion heat (enthalpy) decline; (2) strontium sulfate is an effective nucleating additive to decrease super-cooling degree for such phase change material solidification and (3) to improve indoor thermal comfort, it is preferable to put phase change material in the middle of external walls. Furthermore, the illustrative example of an office building in Chengdu indicates that phase change material insulation can lead to time lag and decrement for indoor air temperature variations. It also indicates that after inserting such phase change material into building external wall, the highest indoor temperature can be decreased by 7℃, leading to 60% cooling energy saving in one typical summer day. This work can provide guidance for building thermal design with phase change materials.

Practical application: The studied sodium acetate–urea composite phase change material has been used as energy storage and thermal insulation materials inserted in envelopes for the demonstration project of low/zero energy consumption passive buildings in China.

Keywords

Phase change material composite wall super-cooling building energy efficiency

Get full access to this article

View all access options for this article.

References

Zhang

Shi

et al.

A new approach based on the inverse problem and variation method for solving building energy and environment problems: preliminary study and illustrative examples. Build Environ 2015; 91: 204–218.

Cheng

Pomianowski

Wang

et al.

A new method to determine thermophysical properties of PCM-concrete brick. Appl Energy 2014; 112: 988–998.

Sharma

Tyagi

Chen

et al.

Review on thermal energy storage with phase change materials and applications. Renewable Sustainable Energy Rev 2009; 13: 318–345.

Pitie

Zhao

Baeyens

et al.

Circulating fluidized bed heat recovery/storage and its potential to use coated phase-change-material (PCM) particles. Appl Energy 2013; 109: 505–513.

Zhang

Zhou

Lin

et al.

Application of latent heat thermal energy storage in buildings: state-of-the-art and outlook. Build Environ 2007; 42: 2197–2209.

Zalba

Marin

Cabeza

et al.

Review on thermal energy storage with phase change materials: heat transfer analysis and applications. Appl Therm Eng 2003; 23: 251–283.

Dhaka

Mathur

Garg

. Effect of building envelope on thermal environmental conditions of a naturally ventilated building block in tropical climate. Build Serv Eng Res Technol 2014; 35: 280–295.

Wang

Cheng

Zeng

et al.

Ideal thermal physical properties of building wall in an active room. Indoor Built Environ 2014; 23: 839–853.

Hou

Chuang

Hsieh

et al.

An analysis of heat insulation efficiency of building outer skins used for green building. Build Serv Eng Res Technol 2012; 33: 407–422.

10.

Cunha

Pinto

Paiva

et al.

A contribution for the improvement in thermal insulation of tabique walls coated with metal corrugated sheets. Build Serv Eng Res Technol 2015; 36: 439–454.

11.

Muthuvel

Saravanasankar

Sudhakarapandian

et al.

Passive cooling by phase change material usage in construction. Build Serv Eng Res Technol 2015; 36: 411–421.

12.

Ozdenefe

Dewsbury

. Thermal performance of a typical residential Cyprus building with phase change materials. Build Serv Eng Res Technol 2016; 37: 85–102.

13.

Moreno

Caste

Sole

et al.

PCM thermal energy storage tanks in heat pump system for space cooling. Energy Build 2014; 82: 399–405.

14.

Zhou

Yang

. Energy performance of a hybrid space cooling system in an office building using SSPCM thermal storage and night ventilation. Sol Energy 2011; 85: 477–485.

15.

Zeng

Wang

et al.

New concept and approach for developing energy efficient buildings: ideal specific heat for building internal thermal mass. Energy Build 2011; 43: 1081–1090.

16.

Zhang

Jiang

. A simple method, the T-history method, of determining the heat of fusion, specific heat and thermal conductivity of phase change materials. Meas Sci Technol 1999; 10: 201–205.

17.

Hawes

Feldman

Banu

. Latent heat storage in building materials. Energy Build 1993; 20: 77–86.

18.

Stritih

Novak

. Solar heat storage wall for building ventilation. Renewable Energy 1996; 8: 268–271.

19.

Hadjieva

Stoykov

Filipova

. Composite salt-hydrate concrete system for building energy storage. Renewable Energy 2000; 19: 111–115.

20.

Koschenz

Lehmann

. Development of a thermally activated ceiling panel with PCM for application in lightweight and retrofitted buildings. Energy Build 2004; 36: 567–578.

21.

Banu

Feldman

Haghighat

et al.

Energy-storing wallboard: flammability tests. J Mater Civil Eng 1998; 10: 98–105.

22.

Ushak

Judith

Cabeza

et al.

Preparation and characterization of inorganic PCM microcapsules by fluidized bed method. Materials 2016; 9: 24–24.

23.

Kuznik

Virgone

. Experimental assessment of a phase change material for wall building use. Appl Energy 2009; 86: 2038–2046.

24.

Farid

Khudhair

Razack

et al.

A review on phase change energy storage: materials and applications. Energy Convers Manage 2004; 45: 1597–1615.

25.

Garay-Ramirez

Cruz-Orea

Martin-Martinez

. Effect of silver nanoparticles on the thermal properties of sodium acetate trihydrate. Int J Thermophys 2015; 36: 1164–1172.

26.

Tan

Bruetting

Vidi

et al.

Correction of the enthalpy-temperature curve of phase change materials obtained from the T-History method based on a transient heat conduction model. Int J Heat Mass Transfer 2017; 105: 573–585.

27.

Bergman

Lavine

Incropera

et al.

Fundamentals of heat and mass transfer, 7th ed. New York: Wiley, 2011.

28.

Sheikh

Patel

. Ultrasound assisted reactive crystallization of strontium sulfate. J Cryst Growth 2014; 390: 114–119.

29.

Zhang

Lin

Zhang

et al.

Ideal thermophysical properties for free-cooling (or heating) buildings with constant thermal physical property material. Energy Build 2006; 38: 1164–1170.