Comparison of indoor air distribution and thermal environment for different combinations of radiant heating systems with mechanical ventilation systems

Abstract

A hybrid system with a radiant heating system and a mechanical ventilation system, which is regarded as an advanced heating, ventilation and air-conditioning (HVAC) system, has been applied in many modern buildings worldwide. To date, almost no studies focused on comparative analysis of the indoor air distribution and the thermal environment for all combinations of radiant heating systems with mechanical ventilation systems. Therefore, in this article, the indoor air distribution and the thermal environment were comparatively analyzed in a room with floor heating (FH) or ceiling heating (CH) and mixing ventilation (MV) or displacement ventilation (DV) when the supply air temperature ranged from 15.0℃ to 19.0℃. The results showed that the temperature effectiveness values were 1.05–1.16 and 0.95–1.02 for MV + FH and MV + CH, respectively, and they were 0.78–0.91 and 0.51–0.67 for DV + FH and DV + CH, respectively. The Predicted Mean Vote values were from 0.24 to 0.45 and from 0.11 to 0.43 for MV + FH and MV + CH, respectively, and from 0.01 to 0.23 and from −0.41 to 0.10 for DV + FH and DV + CH, respectively. Hence, MV + FH had the largest temperature effectiveness and Predicted Mean Vote, and DV + CH had the smallest values. In addition, the vertical air temperature differences for MV + FH and MV + CH were all within the comfort zone according to ISO 7730, but exceeded the comfort zone for DV + FH and DV + CH when the supply air temperature was less than 17℃ and 19℃, respectively. The air distribution effectiveness values for MV + FH and MV + CH were close to the recommended value for MV in the ASHRAE Standard 62.1, and those for DV + FH and DV + CH were slightly less than the recommended value for displacement ventilation. The results in this article are relevant and useful in the process of selection and design of a hybrid system with a radiant heating system and a mechanical ventilation system in practice.

Practical application: The supply air temperature is one of key parameters for the design and operation of a hybrid system with a radiant heating system and a mechanical ventilation system. The results in this article may contribute to the design and operation of a hybrid system when taking in account the indoor air quality and thermal comfort.

Keywords

Radiant heating mechanical ventilation supply air temperature air distribution thermal environment

Get full access to this article

View all access options for this article.

References

Watson

Chapman

. Radiant heating and cooling handbook, New York: McGraw Hill Professional, 2002.

Olesen

. Radiant floor heating in theory and practice. ASHRAE J 2002; 7: 19–24.

Babiak

Olesen

Petras

. Low temperature heating and high temperature cooling, Brussels, Belgium: REHVA, 2009.

Bean

Olesen

Kim

. History of radiant heating and cooling systems. ASHRAE J 2010; 52: 26–31.

Wargocki

Wyon

Sundell

et al.

The effects of outdoor air supply rate in an office on perceived air quality, sick building syndrome (SBS) symptoms and productivity. Indoor Air 2000; 10: 222–236.

Daisey

Angell

Apte

. Indoor air quality, ventilation and health symptoms: an analysis of existing information. Indoor Air 2003; 13: 53–64.

Olesen

Simone

Krajcik

et al.

Experimental study of air distribution and ventilation effectiveness in a room with a combination of different mechanical ventilation and heating/cooling systems. Int J Ventil 2011; 9: 371–384.

Krajčík

Tomasi

Simone

et al.

Experimental study including subjective evaluations of mixing and displacement ventilation combined with radiant floor heating/cooling system. HVAC&R Res 2013; 19: 1063–1072.

Wu X, Fang L, Olesen BW, et al. Air distribution and ventilation effectiveness in a room with floor or ceiling heating and mixing or displacement ventilation. In: Proceedings of the 8th international symposium on heating, ventilation and air conditioning, Xi’an, China, 2014, pp.59–67.

10.

Skistad H. Floor heating and displacement ventilation. In: Proceedings of cold climate HVAC 2003, Trondheim, Norway, 2003, pp.123–130.

11.

Ouazia B, Tardif M and Macdonald A. In-situ performance of displacement ventilation system in Canadian schools with radiant heating systems. In: Proceedings of indoor air, Texas, USA, 2011, pp.1–13.

12.

Liu

Jiang

Zhang

. Temperature and humidity independent control (THIC) of air-conditioning system, New York, Dordrecht, London: Springer Heidelberg, 2013.

13.

Causone

Olesen

Corgnati

. Floor heating with displacement ventilation: an experimental and numerical analysis. HVAC&R Res 2010; 16: 139–160.

14.

Behrendt B. Experimental study of indoor environmental quality and energy use by different combinations of heating, cooling and ventilation systems. Master Thesis, Technical University of Denmark, 2010, pp.18–19.

15.

Fang

Olesen

et al.

Air distribution in a multi-occupant room with mixing or displacement ventilation with or without floor or ceiling heating. Sci Technol Built Environ 2015; 21: 1109–1116.

16.

EN 15251. Ventilation for buildings-indoor environmental input parameters for design and assessment of energy performance of buildings addressing indoor air quality, thermal environment, lighting and acoustics. European Committee for Standardization, 2007.

17.

Feist

Schnieders

Dorer

et al.

Re-inventing air heating: Convenient and comfortable within the frame of the Passive House concept. Energy Build 2005; 37: 1186–1203.

18.

EN 12831. Heating systems in buildings – Method for calculation of the design heat load. European Committee for Standardization, 2003.

19.

GB 50736. Design code for heating, ventilation and air conditioning of civil buildings. Beijing: China Industrial Building Press (in Chinese), 2012.

20.

McIntyre

. Indoor climate, London: Applied Science Publishers, Ltd., 1980.

21.

Skistad

Mundt

Nielsen

et al.

Displacement ventilation in non-industrial premises, Brussels, Belgium: REHVA, 2002.

22.

Mundt

Mathisen

Nielsen

et al.

Ventilation effectiveness, Brussels, Belgium: REHVA, 2004.

23.

ISO 7730. Ergonomics of the Thermal Environment – Analytical Determination and Interpretation of Thermal Comfort using Calculation of the PMV and PPD Indices and Local Thermal Comfort Criteria, European Committee for Standardization, Brussels, 2005.

24.

ASHRAE Standard 55. Thermal Environment Conditions for Human Occupancy. Atlanta, GA, American Society of Heating, Ventilating and Air-Conditioning Engineers, 2013.

25.

Melikov

Langkilde

Derbiszewski

. Airflow characteristics in the occupied zone of rooms with displacement ventilation. ASHRAE Trans 1990; 96: 555–563.

26.

Hanzawa

Melikov

Fanger

. Airflow characteristics in the occupied zone of ventilated spaces. ASHRAE Trans 1987; 93: 524–532.

27.

ASHRAE Standard 62.1. Ventilation for Acceptable Indoor Air Quality. American Society of Heating, Refrigerating and Air-Conditioning Engineers, Inc, 2010.

28.

Olesen

Fang

et al.

A nodal model to predict vertical temperature distribution in a room with floor heating and displacement ventilation. Build Environ 2013; 59: 626–634.