Sage Journals: Discover world-class research

Abstract

A new calculation method for monthly cooling energy demand is presented which extends the utilisation factor method of standard EN ISO 13790:2008 to take account of a number of important features of air-conditioning systems that are currently ignored. In all other respects it is compatible with this method, which is the most widely used means of producing building Energy Performance Certificates in Europe. In particular it enables the impact of free cooling, and of the tempering of supply air to be quantified; calculates tailored seasonal efficiency figures for chillers, and provides initial estimates of the potential savings of inter-room heat recovery and of the energy penalties associated with terminal reheat and dual duct systems.

Practical application: This paper proposes an extension to the most widely used calculation method for Energy Performance Certificates in Europe, improving its ability to reflect important features of central air-conditioning systems. This is of particular importance for climates and buildings where cooling is required when the outdoor air temperature is relatively low. In particular it enables the impact of free cooling, and of the tempering of supply air to be quantified, calculates tailored seasonal efficiency figures for chillers, and provides initial estimates of the potential savings of inter-room heat recovery and of the energy penalties associated with some other systems.

Keywords

Air conditioning energy calculation energy performance rating

Get full access to this article

View all access options for this article.

References

Directive 2010/31/EU of the European Parliament and of the Council of 19 May 2010 on the energy performance of buildings (recast). 2010.

EN ISO 13790: 2008. Energy performance of buildings – calculation of energy use for space heating and cooling, Geneva, Switzerland: International Organization for Standardization, 2008.

Jacobson FR. Energy signature and energy monitoring in building energy management systems. CLIMA 2000 World Congress, Copenhagen, 1985.

Granderson J, et al. Energy information handbook: applications for energy-efficient building operations. Vol. 3: Energy Management, 25-31, LBNL-5272E, Lawrence Berkeley National Laboratory, 2011.

Hitchin ER. The estimation of monthly degree-days. Build Serv Res Technol 1983; 4.

Hitchin R. Heating and cooling load frequency distributions implied by monthly building energy use models. Build Serv Res Technol 2014; 35.

Hitchin ER. Developments in degree-day methods of estimating energy use. Build Environ 1990; 25.

ISO 15927-6:2007. Hygrothermal performance of buildings – calculation and presentation of climatic data – Part 6: accumulated temperature differences (degree-days), Geneva, Switzerland: International Organization for Standardization, 2007.

Hitchin R. HVAC system efficiencies for EPBD calculations. REHVA World Congress Clima 2007 WellBeing Indoors, Helsinki, 2007.

10.

BS EN 14825:2012. Air conditioners, liquid chilling packages and heat pumps, with electrically driven compressors, for space heating and cooling. Testing and rating at part load conditions and calculation of seasonal performance. British Standards Institute, London, 2012.

11.

Zweifel G. A simple chiller model for hourly time step applications. In: Eleventh international IBPSA conference, Glasgow, Scotland, 27–30 July, 2009.

12.

European Commission, COMMISSION REGULATION (EU) No 206/2012 of 6 March 2012 implementing Directive 2009/125/EC of the European Parliament and of the Council with regard to Eco design requirements for air conditioners and comfort fans, http://eur-lex.europa.eu/LexUriServ/LexUriServ.do?uri=OJ:L:2012:072:0007:0027:EN:PDF (accessed 1 December 2013).

13.

Eurovent Certification product performance databases at www.eurovent-certification.com (1 accessed December 2013).

14.

DIN V 18599-7. Energy efficiency of buildings — calculation of the energy needs, delivered energy and primary energy for heating, cooling, ventilation, domestic hot water and lighting — Part 7: delivered energy for air handling and air conditioning systems for non-residential buildings. DIN, Berlin, 2007.

15.

Hitchin R and Law S. The seasonal efficiency of multi-boiler and multi-chiller installations. In: International conference on improving energy efficiency in commercial building (IEECB2006), Frankfurt, Germany, April 2006.

16.

BS EN 15243:2007. Ventilation for buildings. Calculation of room temperatures and of load and energy for buildings with room conditioning systems. Annex I. British Standards Institute, London, 2008.

17.

BS EN 15241:2007. Ventilation for buildings. Calculation methods for energy losses due to ventilation and infiltration in buildings. British Standards Institute, London, 2008.

18.

BS EN 15232:2012. Energy performance of buildings. Impact of building automation, controls and building management. British Standards Institute, London, 2012.

19.

Sustainable Industrial Policy – Building on the Ecodesign Directive – Energy-Using Product Group Analysis/2, Lot 6: Air-conditioning and ventilation systems Contract No. ENTR/2009/035/LOT6/SI2.549494. Air conditioning systems Draft report of Task 6. http://www.ecohvac.eu/downloads/Task%206%20Lot%206%20Air%20Conditioning%20Final%20report%20July%202012.pdf (accessed 1 January 2014).

20.

Krese

. Analysis of building electrical consumption data using an improved cooling degree-day method. Strojniški vestnik - J Mech Eng 2012; 58: 107–114.

21.

Day AR. An improved use of cooling degree-days for analysing chiller energy consumption in buildings. BSERT 2005; 26.

Monthly air-conditioning energy demand calculations for building energy performance rating

Abstract

Keywords

Get full access to this article

References