A brief overview of theoretical, experimental and industrial issues that are typical for studies on human-machine systems is given. The paper distinguishes three human-machine interaction modes: direct control, intermittent control and supervisory control. It is shown that a technology-driven engineering approach drives human-machine interaction out of the loop. It is challenging to use developments, such as multimedia, for all control modes, to enhance rather than abolish human-machine interaction. Design of any of the control modes requires a human-centred design approach. This overview refers to other papers in a series dedicated to human-machine systems.
Get full access to this article
View all access options for this article.
References
1.
Ali, S.1998. 'Approximative wissensbasierte Prozessvisualisierung auf der Basis der Fuzzy-Logik'. PhD thesis, Kassel University , Germany.
2.
Alty, J.L., and Bergan, M.1993. 'The design of multimedia interfaces for process control' , Proceedings of IFAC/IFIP/IFORS/IEA Symposium on Analysis, Design and Evaluation of Man-Machine Systems, Pergamon Press, Oxford, pp.249-255.
3.
Alty, J.L.1999. 'Multimedia and process control interfaces: signals or noise?' (Special issue on Man-Machine Systems), Transactions ofthe Institute of Measurement and Control, 21, 181-190.
4.
Bainbridge L.1987. 'Ironies of automation', In: Rasmussen, J., Duncan, K. D., and Leplat, J. (eds), New Technology, and Human Error, J. Wiley, New York , pp. 271 -283 .
5.
Bekey, C.A.1962. 'The human operator as a sampled data system', IRE- Transactions on Human Factors in Electronics, HFE-3(2), 43-51.
6.
Bisantz, A.M., and Vicente, K.J.1994. 'Making the abstraction hierarchy concrete', International Journal of Human-ComputerStudies, 40, 83-117.
7.
Breedveld, P.1998. Observation, manipulation and eye-hand coordination in minimally invasive surgery. Report N-510, OCP-MMS, Delft University of Technology, The Netherlands.
8.
Dörner, D.1987. 'On the difficulties people have in dealing with complexity' , In: Rasmussen, J., Duncan, K. D., and Leplat, J. (eds), New Technology and Human Error, John Wiley, New York, pp. 97-110.
9.
Endsley, M.R., and Kiris, E.O.1995. 'The out-of-the loop performance problem and level of control in automation', Human Factors, 37(2), 381-394.
10.
Godthelp, H.1984. 'Studies on human vehicle control', PhD thesis, Delft University of Technology, TNO Human Factors Institute, The Netherlands.
11.
Gleick, J.1998. Chaos, Making a New Science, Penguin Books.
12.
Hollnagel, E.1999. 'Modelling the controller of a process' (Special issue on Man-Machine Systems), Transactions of the Institute of Measurement and Control, 21, 163-170.
13.
Keele, S.W.1986. 'Motor control', In: Boff, K. R. et al (eds), Handbook of Perception and Human Performance, Vol. II: Cognitive Processes and Performance, John Wiley, New York, pp. 30.1-30.60.
14.
Kleinman D.L., Baron, S., and Levison, W.H.1971. 'A control theoretic approach to manned-vehicle systems analysis', IEEE Transactions on Automation Control, AC-16(6), 824-832.
15.
Kok, J.J., and Van Wijk, R.1978. 'Evaluation of models describing human operator control of slowly responding complex systems', PhD thesis, Delft University of Technology, The Netherlands.
16.
Larsen, M.N.1993. 'Modelling start-up tasks using functional models'. Technical Report EUR 15027 EN, Commission of the European Communities , JRC-Ispra.
17.
Li, K., and Wieringa, P.A.1997. 'An experimental study on human supervisory control of industrial process and its implications to process system and automation system design', In: Georgakis, C. (ed.), Preprints of the 5th IFAC Symposium on Dynamics and Control of Process Systems (DYCOPS-5), Corfu, Greece, 8-10 June 1998.
18.
Lind, M.1988. 'Diagnosis using multilevel flow models: diagnostic strategies for P96 demonstrator', Technical Report 88-E-309, Institute of Automatic Control Systems, Technical University of Denmark.
19.
Lind, M.1990. 'Representing goals and functions of complex systems - an introduction to multilevel flow modelling', Technical Report 90-D-381, Institute of Automatic Control Systems, Technical University of Denmark.
20.
Lind, M.1999. 'Plant modelling for human supervisory control' (Special issue on Man-Machine Systems), Transactions of the Institute of Measurement and Control, 21, 171-180,
21.
McRuer, D.T., and Krendel, E.S.1959. 'Dynamic response of human operators', WADC-TR-59-135.
22.
McRuer, D.T., and Jex, H.R.1967, 'A review of quasi-linear pilot models', IEEE Transactions on Human Factors in Electronics, 231-249.
23.
Moray, N.1986. 'Monitoring behaviour and supervisory control', In: Boff, K. R. et al (eds), Handbook of Perception and Human Performance, Vol. II: Cognitive Processes and Performance , John Wiley, New York, pp. 40.1-40.51.
24.
Moray, N., and Inagaki, T.1999. 'Laboratory studies of trust between humans and machines in automated systems' (Special issue on Man-Machine Systems), Transactions of the Institute of Measurement and Control, 21, 203-211.
25.
Paassen, M. M. van, and Wieringa, P.A.1997. 'Alarm management; an approach with functional modelling' , Report TUD-WBMT-MMS N507, Delft University of Technology .
26.
Paassen, M. M. van, and Wieringa, P.A.1999. 'Reasoning with multilevel flow models', Rel. Engineering Systems Safety, 64, 151-165.
27.
Poulton, E.C.1974. Tracking Skill and Manual Control, Academic Press, New York.
28.
Papenhuijzen, R.1994. 'Towards a human operator model of the navigator', PhD thesis, Delft University of Technology, The Netherlands.
29.
Rasmussen, J.1983. 'Skills, rules and knowledge; signals signs and symbols, and other distinctions in human performance models', IEEE Transactions Systems Man Cybernetics, 13(3), 257-267.
30.
Rasmussen, J.1986. Information Processing and Human Machine Interaction; An Approach to Cognitive Engineering, Vol. 12, North-Holland, New York.
31.
Sheridan, T.B.1993. 'Survey paper. Teleoperation, Telerobotics. and Telepresence: a progress report', Proceedings of IFAC/IFIP/IFORS/IEA Symposium on Analysis, Design and Evaluation of Man-Machine Systems, Pergamon Press, Oxford, pp. 1-8.
32.
Sheridan, T.B.1999. 'Human supervisory control of aircraft, rail and highway vehicles' (Special issue on Man-Machine Systems) Transactions ofthe Institute of Measurement and Control, 21, 191-201.
33.
Stassen, H.G., and Smets, G.J.F.1995. 'Telemanipulation and Telepresence', Proceedings of IFAC/IFIP/ IFORS/IEA Symposium on Analysis, Design and Evaluation of Man-Machine Systems, Pergamon Press, Oxford, pp. 13-23.
34.
Stassen, H.G., Johannsen, G., and Moray, N.P.1990. 'Internal representation, internal model, human performance model and mental workload', Automatica, 26(4), 811-820.
35.
Stassen, H.G., Andriessen, J.H.M., and Wieringa, P.A.1993. 'On the human perception of complex industrial processes' , Proceedings of the 12th IFAC World Congress, Vol. 6, pp. 275-280.
36.
Stassen, H.G., Dankelman, J., and Grimbergen, C.A.1999. 'Open versus minimally invasive surgery; a man-machine system approach' (Special issue on Man-Machine Systems), Transactions ofthe Institute of Measurement and Control , 21, 151-162.
37.
Wei, Z.G.1998a. 'Mental load and performance at different automation levels', PhD thesis, Delft University of Technology, The Netherlands.
38.
Wei, Z.G., and Wieringa, P.A.1998b. 'A quantitative measure for the degree of automation and its relation to system performance and mental load', Human Factors, 40(2), 277-295.
39.
Zijlstra, F.R.H.1993. 'Efficiency in work behaviour. A design approach for modern tools', PhD thesis, Delft University of Technology, The Netherlands.
