This paper investigates the problem of designing a hybrid sliding mode observer for mode identification and actuator fault reconstruction, applicable for a class of linear switching systems. For each operating mode constituting the whole system, only one observer is doomed to accomplish the two aforementioned tasks in the presence of exogenous disturbances. The method uses concept in the design of the sliding motion so that the effect of uncertainties on the residuals generation for mode recognition and on the reconstruction of the actuator faults will be minimized. Simulation results highlight the efficiency and the effectiveness of the proposed method.
AlessandriAColettaP (2003) Design of observers for switched discrete-time linear systems. In: Proceedings of the 2003 American Control Conference, Denver, USA, 4–6 June 2003, volume 4, pp. 2785–2790. IEEE.
2.
BalluchiABenvenutiLDi BenedettoMDSangiovanni-VincentelliAL (2003) Observability for hybrid systems. In: Proceedings of the 42nd IEEE Conference on Decision and Control, Maui: USA, 9–12 December 2003, volume 2, pp. 1159–1164. Citeseer.
3.
BejaranoFJFridmanL (2011a) State exact reconstruction for switched linear systems via a super-twisting algorithm. International Journal of Systems Science42(5): 717–724.
4.
BejaranoFJPisanoA (2011b) Switched observers for switched linear systems with unknown inputs. IEEE Transactions on Automatic Control56(3): 681–686.
5.
BranickyMS (1998) Multiple Lyapunov functions and other analysis tools for switched and hybrid systems. IEEE Transactions on automatic control43(4): 475–482.
6.
ChenLZhaoYFuS, et al. (2018) Fault estimation observer design for descriptor switched systems with actuator and sensor failures. IEEE Transactions on Circuits and Systems I: Regular Papers66(2): 810–819.
7.
ChilaliMGahinetP (1996) H/sub/spl infin//design with pole placement constraints: An LMI approach. IEEE Transactions on Automatic Control41(3): 358–367.
8.
DávilaJRosHFridmanL (2012) State observation for nonlinear switched systems using nonhomogeneous high-order sliding mode observers. Asian Journal of Control14(4): 911–923.
9.
DeCarloRABranickyMSPetterssonSLennartsonB (2000) Perspectives and results on the stability and stabilizability of hybrid systems. Proceedings of the IEEE88(7): 1069–1082.
10.
EdelmayerABokorJ (2002) Optimal scaling for sensitivity optimization of detection filters. International Journal of Robust and Nonlinear Control: IFAC-Affiliated Journal12(8): 749–760.
11.
EdwardsCSpurgeonSK (1994) On the development of discontinuous observers. International Journal of control59(5): 1211–1229.
12.
EdwardsCSpurgeonS (1998) Sliding Mode Control: Theory and Applications. London: CRC Press.
13.
EdwardsCSpurgeonSKPattonRJ (2000a) Sliding mode observers for fault detection and isolation. Automatica36(4): 541–553.
14.
EdwardsCSpurgeonSKPattonRJ (2000b) Sliding mode observers for fault detection and isolation. Automatica36(4): 541–553.
15.
Gómez-GutiérrezDČelikovskSRamrez-TreviñoACastillo-ToledoB (2015) On the observer design problem for continuous-time switched linear systems with unknown switchings. Journal of the Franklin Institute352(4): 1595–1612.
16.
Gómez-GutiérrezDČelikovskSRamrez-TreviñoA, et al. (2011) Sliding mode observer for switched linear systems. In: 2011 IEEE International Conference on Automation Science and Engineering, Trieste: Italy, 24–27 August 2011, pp. 725–730. IEEE.
17.
IslemLNadiaZAsmaT (2019) Tracking fault tolerant control for hybrid system: Two-link human arm application. Journal of Dynamic Systems, Measurement, and Control141(5): 051015.
18.
JohnsonSCChakrabartyAHuJ, et al. (2018) Dual-mode robust fault estimation for switched linear systems with state jumps. Nonlinear Analysis: Hybrid Systems27: 125–140.
19.
LinHAntsaklisPJ (2009) Stability and stabilizability of switched linear systems: a survey of recent results. IEEE Transactions on Automatic control54(2): 308–322.
20.
PetterssonSLennartsonB (2002) Hybrid system stability and robustness verification using linear matrix inequalities. International Journal of Control75(16–17): 1335–1355.
21.
SunZGeSS (2005) Analysis and synthesis of switched linear control systems. Automatica41(2): 181–195.
22.
SunZGeSSLeeTH (2002) Controllability and reachability criteria for switched linear systems. Automatica38(5): 775–786.
23.
TanCPEdwardsC (2003) Sliding mode observers for robust detection and reconstruction of actuator and sensor faults. International Journal of Robust and Nonlinear Control: IFAC-Affiliated Journal13(5): 443–463.
24.
TanwaniAShimHLiberzonD (2013) Observability for switched linear systems: Characterization and observer design. IEEE Transactions on Automatic Control58(4): 891–904.
25.
UtkinVI (2013) Sliding Modes in Control and Optimization. Springer Science & Business Media. Berlin: Springer.
26.
Van GorpJDefoortMDjemaiMVeluvoluKC (2015) Fault detection based on higher-order sliding mode observer for a class of switched linear systems. IET Control Theory & Applications9(15): 2249–2256.
27.
Van GorpJDefoortMVeluvoluKCDjemaiM (2014) Hybrid sliding mode observer for switched linear systems with unknown inputs. Journal of the Franklin Institute351(7): 3987–4008.
28.
TanCPEdwardsC (2001) An LMI approach for designing sliding mode observers. International Journal of Control74(16): 1559–1568.
29.
YangJChenYZhuFWangF (2017) Simultaneous state and output disturbance estimations for a class of switched linear systems with unknown inputs. International Journal of Systems Science48(1): 22–33.
30.
YinSGaoHQiuJKaynakO (2017a) Descriptor reduced-order sliding mode observers design for switched systems with sensor and actuator faults. Automatica76: 282–292.
31.
YinSYangHKaynakO (2017b) Sliding mode observer-based ftc for markovian jump systems with actuator and sensor faults. IEEE Transactions on Automatic Control62(7): 3551–3558.
