In this paper, a proportional–integral–derivative (PID) controller design method for stable and integrating time-delay systems with and without non-minimum phase zero (inverse response) using the direct method is proposed. The PID controller gains are obtained by matching the frequency response of the closed-loop control system to that of the reference model with a minimum weighted integral squared absolute error in the bandwidth region. The reference model is chosen to satisfy the desired maximum sensitivity Ms. As a result, three linear algebraic equations in three unknowns are obtained and the solution of them gives the PID controller gains. The proposed method can be applied to low- and high-order systems, and the Pade approximation of the time-delay term e−Ls is not required.
AliAMajhiS (2010) PID controller tuning for integrating processes. ISA Transactions49: 70–78.
2.
AnwarMNPanS (2015) A frequency response model matching method for PID controller design for process with dead-time. ISA Transactions55: 175–187.
3.
AnwarMNShamsuzzohaMPanS (2015) A frequency domain PID controller design method using direct synthesis approach. Arabian Journal for Science and Engineering40(4): 995–1004.
4.
AstromKHagglundT (1995) PID Controllers: Theory, Design, and Tuning. Research Triangle Park, NC: Instrument Society of America.
5.
AstromKHagglundT (2005) Advanced PID Control. Research Triangle Park, NC: Instrument Society of America.
6.
AstromKJHagglundT (2004) Revisiting the Ziegler–Nichols step response method for PID control. Journal of Process Control14: 635–650.
7.
AstromKJHangCCPerssonP. (1992) Towards intelligent PID control. Automatica28(1): 1–9.
8.
ChenDSeborgDE (2002) PI/PID controller design based on direct synthesis and disturbance rejection. Industrial & Engineering Chemistry Research41(19): 4807–4822.
9.
JengJCLinSW (2012) Robust proportional–integral–derivative controller design for stable/integrating processes with inverse response and time delay. Industrial & Engineering Chemistry Research51(6): 2652–2665.
10.
KalmanR (1958) Design of a self-optimizing control system. Transactions of the ASME80: 468–478.
11.
LevyEC (1959) Complex-curve fitting. IRE Transactions on Automatic ControlAC-4(1): 37–43.
12.
LuoYChenYQ (2011) Synthesis of robust PID controllers design with complete information on pre-specifications for the FOPTD systems. In:Proceedings of American Control Conference, pp. 5013–5018.
13.
QibingJQieLQiW. (2013) PID controller design based on the time domain information of robust IMC controller using maximum sensitivity. Chinese Journal of Chemical Engineering21(5): 529–536.
14.
RaoSVLambaSS (1974) A new frequency domain technique for the simplification of linear dynamic systems. International Journal of Control20(1): 71–79.
15.
RaoASRaoVSRChidambaramM (2009) Direct synthesis-based controller design for integrating processes with time delay. Journal of the Franklin Institute346(1): 38–56.
16.
RattanKS (1984) Digitalization of existing continuous control systems. IEEE Transactions on Automatic Control29(3): 282–285.
17.
RiveraDEMorariMSkogestadS (1986) Internal model control. 4. PID controller design. Industrial & Engineering Chemistry Process Design and Development25(1): 252–265.
18.
ShamsuzzohaMLeeM (2007) IMC–PID controller design for improved disturbance rejection of time delayed processes. Industrial & Engineering Chemistry Research46(7): 2077–2091.
19.
SkogestadS (2003) Simple analytic rules for model reduction and PID controller tuning. Journal of Process Control13: 291–309.
20.
ThompsonS (1985) Model reduction for closed-loop performance. Transactions of the Institute of Measurement and Control7(3): 127–132.
21.
ThompsonS (1989) Control Systems Engineering and Design. Harlow: Longman Scientific & Technical.
22.
VanavilBChaitanyaKKRaoAS (2015) Improved PID controller design for unstable time delay processes based on direct synthesis method and maximum sensitivity. International Journal of Systems Science46(8): 1349–1366.
23.
WangQGHangCCBiQ (1997) A frequency domain controller design method. Transactions of the Institution of Chemical Engineers75(1): 64–72.
24.
WangJZhangYWangW (2006) Optimal design of PI/PD controller for non-minimum phase system. Transactions of the Institute of Measurement and Control28(1): 27–35.
