In this paper, a wavelet-based low-pass filter (WBLPF) is proposed to improve the direct current (DC) component separation speed. To this end, three different methods are studied to implement discrete wavelet transform, and then they are compared with each other in term of transient response time, accuracy and computational cost. Afterwards, the conventional low-pass filter is replaced by the new WBLPF in the p-q method. This replacement increases the speed of DC component separation, and consequently the performance of the shunt active power filter is improved. To verify and examine the proposed method, a power system is simulated in MATLAB software and a prototype is implemented in the laboratory. The simulation and experimental results confirm the superiority of the proposed method.
AdelMZaidSMahgoubO (2011) Improved active power filter performance based on an indirect current control technique. Journal of Power Electronics11: 931–937.
2.
AkinciTCEkrenNSekerSet al. (2013) Continuous wavelet transform for ferroresonance phenomena in electric power systems. International Journal of Electrical Power and Energy Systems44: 403–409.
3.
CampanhoLBGGoedtelASilvaSAODet al. (2012) Neural-networks and synchronous reference frame applied in the harmonic compensation with a three-phase parallel active power filter. In: International conference on renewable energies and power quality, Santiago de Compostela, Spain, 28–30 March, 2012, pp.517–522. Spain: European Association for the Development of Renewable Energies, Environment and Power Quality (EA4EPQ).
4.
ChandrasekarPKamarajV (2011) Integer lifting wavelet transform based hybrid active filter for power quality improvement. In: International conference on electrical energy systems (ICEES), Newport Beach, CA, 3–5 January 2011, pp.103–107. Piscataway, NJ: IEEE.
5.
ChebabhiAFellahMKKessalAet al. (2015) Comparative study of reference currents and DC bus voltage control for Three-Phase Four-Wire Four-Leg SAPF to compensate harmonics and reactive power with 3D SVM. ISA Transactions57: 360–372.
6.
ChenY (2008) Harmonic detection in electric power system based on wavelet multi-resolution analysis. In: International conference on computer science and software engineering, 5, Wuhan, Hubei, 12–14 December, 2008, pp.1204–1207. Piscataway, NJ: IEEE.
7.
DaubechiesISweldensW (1998) Factoring wavelet transforms into lifting steps. Journal of Fourier Analysis and Applications4: 247–269.
8.
DautISyafruddinHSRosnazriAet al. (2006) The effects of harmonic components on transformer losses of sinusoidal source supplying non-linear loads. American Journal of Applied Sciences3: 2131–2133.
9.
FarrokhiMJamaliSMousaviSA (2004) Fuzzy logic based indirect current control of the shunt active power filter. In: Universities power engineering conference, 1, Bristol, UK, 8 September, 2004, pp.489–493. Piscataway, NJ: IEEE.
10.
FeiJHouS (2013) Adaptive fuzzy-sliding control with fuzzy-sliding switching for three-phase active power filter. Transactions of the Institute of Measurement and Control35: 1094–1103.
11.
FirouzjahKGSheikholeslamiAKarami-MollaeiMRet al. (2009) A predictive current control method for shunt active filter with windowing based wavelet transform in harmonic detection. Simulation Modelling Practice and Theory17: 883–896.
12.
HerreraRSSalmeronPVazquezJRet al. (2007) Instantaneous reactive power theory: A new approach applied to N wire systems. In: IEEE international symposium on industrial electronics, Vigo, Spain, 4–7 June, 2007, pp.2457–2462. Piscataway, NJ: IEEE.
13.
IEC 61000–4–30 (2015) Electromagnetic compatibility, power quality measurement methods.
14.
IlmazIYErmiMCadirciI (2012) Medium frequency induction melting furnace as a load on the power system. IEEE Transactions on Industry Applications48: 1203–1214.
15.
JainSKSinghSN (2013) Fast harmonic estimation of stationary and time-varying signals using EA-AWNN. IEEE Transactions on Instrumentation and Measurement62: 335–343.
16.
KaruppananPMahapatraKK (2012) PI and fuzzy logic controllers for shunt active power filter — A report. ISA Transactions51: 163–169.
17.
KeslerMOzdemirE (2011) Synchronous-reference-frame-based control method for upqc under unbalanced and distorted load conditions. IEEE Transactions on Industrial Electronics58: 3967–3975.
18.
LiuHLiuGShenY (2006) A novel harmonics detection method based on wavelet algorithm for active power filter. World Congress on Intelligent Control and Automation2: 7617–7621.
19.
MallatSG (1989) A theory for multiresolution signal decomposition: the wavelet representation. IEEE Transactions on Pattern Analysis and Machine Intelligence11: 674–693.
20.
ModarresiJBinaMTGolkarMA (2012) Improving the p-q compensation method in the presence of low-order harmonics by LWT: theory and implementation. International Review of Electrical Engineering7: 5022–5028.
21.
ModarresiJHooshmandR-ANosratabadiSM (2014) Enhancement of power measurement using a modified method based on wavelet with preprocessing: electric arc furnace case study. Transactions of the Institute of Measurement and Control37: 1095–1108.
22.
MorsiWGEl-HawaryME (2009) A new reactive, distortion and non-active power measurement method for nonstationary waveforms using wavelet packet transform. Electric Power Systems Research79: 1408–1415.
23.
PatidarlRDSinghSP (2008) A fast acting 1/z controller for shunt active filter operation for harmonics and reactive power compensation. In: International conference on industrial and information systems, Kharagpur, India, 8–10 December 2008, pp.1–6. Piscataway, NJ: IEEE.
24.
SifuzzamanMIslamMRAliMZ (2009) Application of wavelet transform and its advantages compared to Fourier transform. Journal of Physical Sciences13: 121–134.
25.
UytterhoevenGRooseDBultheelA (1997) Wavelet transforms using the lifting scheme. Report ITA-Wavelets-WP1.1. Department of Computer Science, Katholieke Universiteit Leuven.
26.
YilmazISalorOErmisMet al. (2012) Field-data-based modeling of medium frequency induction melting furnaces for power quality studies. IEEE Transactions on Industry Applications48: 1215–1224.
