Sage Journals: Discover world-class research

Abstract

The gap sensor plays an important role for a electro-magnetic levitation system, which is a critical component of high-speed maglev trains. An artificial neural network is a promising area in the development of intelligent sensors. In this paper, a radial basis function (RBF) neural network modelling approach is introduced for the compensation of the non-contact inductive gap sensor of the high-speed maglev train. As an inverse model compensator, the designed RBF-based model is connected in series to the output terminal of the gap sensor. The network is trained by using a gradient descent learning algorithm with momentum. This scheme could estimate accurately the correct air-gap distance in a wide range of temperatures. The simulation studies of this model show that it can provide a compensated gap value with an error of less than ±0.4 mm at any temperature from 20° to 80°C. In particulr, the maximum estimation error can be reduced to ±0.1 mm when the working gap varies from 8 to 12 mm. The experimental results indicate that the compensated gap signal could meet the requirements of the levitation control system.

Keywords

Air gap high-speed maglev train inductive sensor radial basis function neural network

Get full access to this article

View all access options for this article.

References

Andronov

Vitt

Khaikin

(1987) Theory of Oscillators. New York: Dover.

Bose

(2007) Neural network applications in power electronics and motor drives—an introduction and perspective. IEEE Transactions on Industrial Electrons 54: 14–33.

Chuan

Chen

Chao

(2010) The application of RBF neural network in the compensation for temperature drift of the silicon pressure Sensor. Proceedings of International Conference on Computer Design and Applications, vol. 2, pp. 434–437.

Cotton

Wilamowski

(2011) Compensation of nonlinearities using neural networks implemented on inexpensive microcontrollers. IEEE Transactions on Industrial Electrons 58: 733–740.

Fericean

Droxler

(2007) New non-contacting inductive analog proximity and inductive linear displacement sensors for industrial automation. IEEE Sensors Journal 7: 1538–1545.

Fericean

Friedrich

Fritton

. (2001) Moderne Wirbelstromsensoren—linear und temperaturstabil. Elektronik 8: 98–103 (in German).

Wang

(2004) Adaptive neural control of uncertain MIMO nonlinear systems. IEEE Transactions on Neural Networks 15: 674–692.

Hao

Zhang

(2008) Application of RBF neural network to temperature compensation of gas sensor. Proceedings of International Conference on Computer Science and Software Engineering, pp. 839–842.

Hashemi

Ghaisari

Zakeri

(2010) Modeling and compensation for capacitive pressure sensor by RBF neural networks. Proceedings of the IEEE International Conference on Control and Automation, Xiamen, China, pp. 1109–1114.

10.

Hou

Yang

(2005) A virtual instrument for sensors nonlinear errors calibration. Proceedings of Instrumentation and Measurement Technology Conference, Ottawa, Canada, pp. 2013–2016.

11.

Jagiella

Fericean

(2002) Miniaturized inductive sensors for industrial applications. Proceedings of the 1st IEEE Conference on Sensors, Orlando, FL, USA, pp. 771–778.

12.

Jing

Zhang

(2005) Design of gap determination system for high-speed maglev train. Journal of Transducer Technology 24: 71–73 (in Chinese).

13.

Jing

Xiao

(2011) Modeling of gap sensor for high-speed maglev train based on RBF network. Proceedings of 2011 IEEE International Conference on Cyber Technology in Automation, Control and Intelligent Systems, Kunming, China, pp. 403–406.

14.

Luo

Puthusserypady

(2007) Estimation of the hemodynamic response of fMRI data using RBF neural network. IEEE Transactions on Biomedical Engineering 54: 1371–1381.

15.

Patra

Kot

Panda

(2000) An intelligent pressure sensor using neural networks. IEEE Transactions on Instrumentation and Measurement 49: 829–834.

16.

Rumelhart

Hinton

Williams

(1986) Learning representations by back-propagating errors. Nature 323: 533–536.

17.

Schonhardt

Korvink

Mohr

. (2008) Combdrive configuration for an electromagnetic reluctance actuator. Journal of Microelectromechanical Systems, 1164–1171.

18.

Wilamowski

(2009) Neural network architectures and learning algorithms. IEEE Industrial Electronics Magazine 3: 56–63.

19.

Zhou

(2009) Research on levitation gap sensor for high speed maglev train. Journal of Test and Measurement Technology 23: 466–470 (in Chinese).

Compensation of gap sensor for high-speed maglev train with RBF neural network

Abstract

Keywords

Get full access to this article

References