Five different approaches are presented to assign characteristic ratios for commensurate fractional order systems having order in (0,0.5]. Through the indirect methods, a closed-loop or plant transfer function is converted to a commensurate order one with an order greater than 0.5 so that the previously designed CRA method by the authors is applicable. The first method among the proposed direct ones is based on increasing the order of the desired closed-loop transfer function that allows the employment of positive characteristic ratios. In the second method the closed-loop response is sped up by augmenting an appropriate zero. The final method uses negative characteristic ratios to reach the goal. Computer simulations are provided to show the performance of the mentioned methods in a comparative study.
AstromKJHagglundT (1995) PID Controllers, Theory, Design, and Tuning. Research Triangle Park, NC: Instrument Society of America.
2.
BenchellaAPoinotTTrigeassouJC (2006) Approximation and identification of diffusive interfaces by fractional models. Signal Processing86: 2712–2727.
3.
BiswasADasSAbrahamA. (2009) Design of fractional-order PIλDµ controllers with an improved differential evolution. Engineering Applications of Artificial Intelligence22: 343–350.
4.
ChenYQPetrasIXueD (2009) Fractional order control: a tutorial. In: Proceedings of the American Control Conference, St. Louis, Missouri, 1397–1411.
5.
ChestnutHMayerRW (1959) Servomechanisms and Regulating System Design. Vol. I. New York: John Wiley & Sons.
6.
DarbhaS (2003) On the synthesis of controllers for continuous time LTI systems that achieve a non-negative impulse response. Automatica39: 159–165.
7.
DeodhareGVidyasagarM (1990) Design of non-overshooting feedback control systems, In: Proceedings of IEEE Conference on Decision and Control, vol. 3, 1827–1834.
8.
EmreESilvermanLH (1980) Partial model matching of linear systems. IEEE Transactions on Automatic Control25: 280–281.
9.
GrahamDLathropRC (1953) The synthesis of optimum transient response: criteria and standard forms. AIAA Transactions72: 273–288.
10.
JinLKimYC (2008) Fixed, low-order controller design with time response specifications using non-convex optimization. ISA Transactions47: 429–438.
11.
KesslerC (1960) Ein Beitrag zur Theorie Mehrschleifiger Regulungen. Regelungst8: 261–266.
12.
KimYCKeelLHBhattacharyaSP (2003) Transient response control via characteristic ratio assignment. IEEE Transactions on Automatic Control48: 2238–2244.
13.
LeeCHChangFK (2010) Fractional-order PID controller optimization via improved electromagnetism-like algorithm. Expert Systems with Applications, 37: 8871–8878.
14.
LuoYChenYQWangCY. (2010) Tuning fractional order proportional integral controllers for fractional order systems. Journal of Process Control20: 823–831.
15.
ManabeS (1998) Coefficient diagram method. In: Proceedings of the 14th IFAC Symposium on Automatic Control in Aerospace, Seoul, Korea, 199–210.
16.
MeralFCRoystonTJMaginR (2010) Fractional calculus in viscoelasticity: an experimental study. Communications in Nonlinear Science and Numerical Simulation15: 939–945.
17.
Merrikh-BayatFKarimi-GhartemaniM (2010) Method for designing PID stabilizers for minimum phase fractional-order systems. IET Control Theory and Applications4: 61–70.
18.
MillerKSRossB (1993) An Introduction to the Fractional Calculus and Fractional Differential Equations. New York: John Wiley & Sons.
19.
MooreBCSilvermanLM (1972) Model-matching by state feedback and dynamic compensation. IEEE Transactions on Automatic Control17: 491–497.
20.
MooreKLBhattacharyaSP (1990) A technique for choosing zero locations for minimal overshoot. IEEE Transactions on Automatic Control35: 577–580.
21.
NaslinP (1969) Essentials of Optimal Control. Cambridge, MA: Boston Technical Publishers Inc.
22.
PhillipsSFSeborgD (1988) Conditions that guarantees no overshoot for linear systems. International Journal of Control47: 1043–1059.
23.
PodlubnyI (1999) Fractional Differential Equations. San Diego, CA: Academic Press.
24.
PodlubnyIPetrasIVinagreBM. (2002) Analogue realizations of fractional-order controllers. Nonlinear Dynamics29: 281–296.
25.
SabatierJAgrawalOPTenreiro MachadoJA (2007) Advances in Fractional Calculus: Theoretical Developments and Applications in Physics and Engineering. Dordrecht: Springer.
26.
SpasicAMLazarevicMP (2005) Electroviscoelasticity of liquid/liquid interfaces: fractional order model. Journal of Colloid and Interface Science, 282: 223–230.
27.
SugiMSaitoK (1996) The fractal device-a novel circuit element based on organized molecular films. Thin Solid Films284–285: 879–881.
TabatabaeiMHaeriM (2010a) Characteristic ratio assignment in fractional order systems. ISA Transactions49: 470–478.
30.
TabatabaeiMHaeriM (2010b) Loop shaping design of fractional PD and PID controllers. In: 4th IFAC Workshops on Fractional Differentiation and Its Applications, Badajoz, Spain.
31.
TavazoeiMSBahavarniaM (2010) Fractional-order models and overshooting step responses. In: 4th IFAC Workshops on Fractional Differentiation and Its Applications, Badajoz, Spain.
32.
TavazoeiMSHaeriM (2005) Comparison of the existing methods in determination of the Characteristic polynomial. In: ARAS Conference, Istanbul, Turkey, 130–133.
33.
TavazoeiMSHaeriM (2010) Periodic characteristic ratio (PCR) method: an alternative method to determine the characteristic polynomial. Mathematics and Computers in Simulation80: 1841–1853.
34.
ValerioDCostaJ (2006) Tuning of fractional PID controllers with Ziegler–Nichols-type rules. Signal Processing86: 2771–2784.
35.
WangQGZhangZAstromKJ. (2009) Guaranteed dominant pole placement with PID controllers. Journal of Process Control19: 349–352.
