In this paper the state-of-the-art developments model-based fault diagnosis in technical processes are reviewed. Attention is focused upon both the analytical approaches that make use of the quantitative models and the knowledge-based approaches using qualitative models. Basic concepts and the advantages as well as disadvantages of different model-based fault diagnosis schemes are outlined.
Adjallah, K., Maguin, D. and Rogot, J. 1994: Nonlinear observer based fault detection. Proceedings of the 3rd IEEE Conference on control applications, 1115-1120.
2.
Alcorta GarcõÁa, E. and Frank, P. M. 1996: On the relationship between observer and parameter identification based approachess to fault detection. Proceedings of the 14th IFAC World Congress, Vol. N, 25-29.
3.
Alcorta GarcõÁa, E. and Frank, P. M.1997: Deterministic nonlinear observer based approaches to fault diagnosis: a survey. Control Engineering Practice5, 663-670.
4.
Amann, P. and Frank, P. M. 1997: On fuzzy model-building in observers for fault diagnosis. IMACS World Congress, Berlin, Vol. 6, 695-700.
5.
Amann, P., Perronne, J. M., Gissinger, G. L. and Frank, P. M. 1997: Fuzzy observer for fault detection in complex systems applied to detection of critical driving situations. Preprints of the ESF Third Joint COSY Workshop Control of Complex Systems, Budapest, 153-158.
6.
Ayoubi, M.1996a: Fuzzy systems design based on a hybrid neural structure and application to fault diagnosis of technical processes. Control Engineering Practice4, 35-42.
7.
Ayoubi, M.1996b: Nonlinear system identification based on neural networks with locally distributed dynamics and application to technical processes. Düsseldorf: Forstschritt-Berichte VDI, VDI-Verlag, Reihe 8, No. 591.
8.
Ayoubi, M. and Isermann, R.1997: Neuro-fuzzy systems for diagnosis. Fuzzy Sets and Systems89, 289-307.
9.
Babuska, R. and Verbruggen, H. B.1996: An overview of fuzzy modeling for control. Control Engineering Practice4, 1593-1606.
10.
Ballé, P., Fischer, M., Füssel, D., Nelles, O. and Isermann, R.1998: Integrated control, diagnosis and reconfiguration of a heat exchanger. IEEE Control Systems18, 52-63.
11.
Basseville, M.1988: Detecting changes in signals and systems - a survey. Automatica24, 309-326.
12.
Basseville, M.1997: Information criteria for residual generation and fault detection and isolation. Automatica33, 783-803.
13.
Basseville, M. and Benveniste, A.1985: Detection of abrupt changes in signals and dynamic systems. Berlin: Springer Verlag.
14.
Beard, R. V.1971: Failure accommodation in linear systems through self-reorganisation. Cambridge MA: Department MVT-71-1, Man Vehicle Laboratory.
15.
Billmann, L. and Isermann, R.1987: Leak detection methods for pieplines. Automatica23, 381-385.
16.
Chen, J. and Patton, R. J.1999: Robust model-based fault diagnosis for dynamic systems. Boston, Dordrecht, Amsterdam: Kluwer.
17.
Chen, J., Patton, R. J. and Zhang, H. Y.1996: Design of unknown input observers and robust fault detection filters. International Journal of Control63, 85-105.
18.
Chow, E. Y. and Willsky, A. S.1984: Analytical redundancy and the design of robust failure detection systems. IEEE Transactions on ControlAC-29, 603-614.
19.
Clarks, R. N.1978: A simplified instrument failure detection scheme. IEEE Transactions in Aerospace Electronics and Systems14, 558-563.
20.
Delmaire, G., Cassar, J. P. and Staroswiekci, M. 1994a: Comparison of identification and parity space approaches for fault detection in single input single output systems. Proceedings of the 3rd IEEE Conference on Control Applications, 865-870.
21.
Delmaire, G., Cassar, J. P. and Staroswiekci, M. 1994b: Identification and parity space approaches for fault detection in siso systems including modelling errors. Proceedings of the 33rd IEEE CDC, 2279-2285.
22.
Ding, X. and Frank, P. M. 1989: Fault detection via optimally robust detection filters. Proceedings of the 28th IEEE CDC, 1767-1772.
23.
Ding, X. and Frank, P. M.1990: Fault detection via factorization approach. Systems Control Letters14, 431-436.
24.
Ding, X. and Frank, P. M.1993: On-line fault detection in uncertain systems using adaptive observers. European Journal of Diagnosis and Safety in Automation3, 9-21.
25.
Ding, X., Guo, L. and Frank, P. M. 1993: A frequency domain approach to fault detection of uncertain dynamic systems. Proceedings of the 32nd CDC, 1722-1727.
26.
Ding, X., Guo, L. and Jeinsch, T. 1997: On observer-based fault detection. Proceedings of SAFEPROCESS 97, 112-120.
27.
Ding, X., Guo, L. and Jeinsch, T. 1998: A numerical approach to analysis and design of FDI systems. Proceedings of the 37th IEEE CDC, 1137-1142.
28.
Ding, X., Guo, L. and Jeinsch, T.1999a: A characterization of parity space and its application to robust fault detection. IEEE Transactions on Control, No. 2, 337-343.
29.
Ding, X., Ding, E. L. and Jeinsch, T. 1996b: An approach to analysis and design of observer and parity relation based FDI systems. Proceedings of the 14th IFAC World Congress, Vol. P, 37-42.
30.
Ding, X., Ding, E. L., Jeinsch, T. and Frank, P. M.2000. A unified aproach to the optimization of fault detection systems. International Journal of Adaptive Control and Signal Processing accepted.
31.
Douglas, R. K. and Speyer, J. L. 1995: An H∞bounded fault detection filter. Proceedings of ACC, 86-90.
32.
Edelmayer, A., Bocor, J., Szigeti, F. and Keviczky, L.1997: Robust detection filter design in the presence of time-varying system perturbations. Automatica33, 471-475.
33.
Emani-Naeini, A., Muhammad, A. and Rock, S. M.1998: Effect of model uncertain on failure detection: the threshold selector. IEEE Transactions in Automatic ControlAC-33, 1106-1115.
34.
Faitakis, Y. E. and Kantor, J. C.1996: Residual generation and fault detection for discretime systems using l∞ technique. International Journal of Control64, 155-174.
35.
Frank, P. M.1986: Fault diagnosis in dynamic systems via state estimation - a survey. In: Tzafestas, S. G., Singh, M. and Schmidt, G. editors, Systems fault diagnostics, reliability and related knowledge-based approaches, Vol. 1. Dordrecht: D Reidel, 35-98.
36.
Frank, P. M. 1987: Advanced fault detection and isolation schemes using nonlinear and robust observers. Proceedings of the 10th IFAC World Congres, Vol. 3, 63-68.
37.
Frank, P. M.1990: Fault diagnosis in dynamic systems using analytical and knowledge-based redundancy - a survey. Automatica26, 459-474.
38.
Frank, P. M.1994: Enhancement of robustness in observer-based fault detection. International Journal of Control59, 955-981.
39.
Frank, P. M.1996: Analytical and qualitative model-xbased fault diagnosis - a survey and some new results. European Journal of Control2, 6-28.
40.
Frank, P. M. and Ding, X.1994: Frequency domain approach to optimally robust residual generation and evaluation for model-based fault diagnosis. Automatica30, 789-904.
41.
Frank, P. M. and Ding, X.1997: Survey of robust residual generation and evaluation methods in observer-based fault detection systemss. Journal of Process Control7: 403-424.
42.
Frank, P.M. and Keller, L. 1984: Entdeckung von Instrumentenfehlanzeigen mittels Zustandsschaetzung in technischen Regelungssystemen. Düsseldorf: VDI Fortschrittsberichte, VDI Verlag, Reihe 8, No. 80.
43.
Frank, P. M. and Koeppen, B.1993: Review of optimal solutions to the robustness problem in observer-based fault detection. IMechE, Part I: Journal of Systems and Control Engineering207, 105-112.
44.
Frank, P. M. and Selliger, R.1991: Fault detection and isolation in automatic process. In: Leondes, C. editor, Control and dynsmic systems, advances in theory and applications, Vol. 49, Part 5 of 5. New York: Academic Press, 241-287.
45.
Frank, P. M. and Wünnenberg, J.1989: Robust fault diagnosis using unknown input observer schemes. In Patton, R. J., Frank, P. M. and Clark, R. N., editors, Fault diagnosis in dynamic systems. Englewood Cliffs, New Jersey: Prentice Hall, 46-98.
46.
Frank, P. M., Alcorta-GarcõÁaE. and Köppen-Seliger, B. 1997: Modeling for fault detection and isolation. Preprints of the ESF Third Joint COSY Workshop Control of Complex Systems, Budapest, 111-129.
47.
Füssel, D., Ballé, D. and Iserman, R. 1997: Closed loop fault diagnosis based on a nonlinear process model and automatic fuzzy rule generation. Preprints of the IFAC Symposium on Fault Detection, Supervision and Safety for Technical Processes, Kingston upon Hull, Vol. 1, 359-364.
48.
Garg, V. and Hedrick, J. K.1995: Fault detection filters for a class of nonlinear systems. Proceedings of ACC ’95, 1647-1651.
49.
Ge, W. and Fang, C. Z.1988: Detection of faulty components via robust observation. International Journal of Control47, 581-599.
50.
Gertler, J. J.1988: Survey of model-based failure detection and isolation in complex plants. IEEE Control Systems Magazine3, 3-11.
51.
Gertler, J. J. 1991: Analytical redundancy methods in fault detection and isolation. Proceedings of the IFAC/IMACS Symposium SAFEPROCESS, Baden-Baden, 9-21.
52.
Gertler, J. J. 1995: Diagnosing parametric faults: from parameter estimation to parity relation. Proceedings of ACC 95, 1615-1620.
53.
Gertler, J. J.1998: Fault detection and diagnosis in engineering systems. New York: Marcel Dekker.
54.
Gertler, J. J. and Singer, D.1990. A new structural framework for parity equation based failure detection and isolation. Automatic26, 381-388.
55.
Hammouri, H., Kinnaert, M. and El Yaagoubi, E. H.1998: Fault detection and isolation for state affine systems. European Journal of Control4, 2-16.
56.
Haykin, S.1994: Neural networks: a comprehensive foundation. New York: Macmillan College Publishing Company.
57.
Hengy, D. and Frank, P. M. 1986: Component failure detection via nonlinear observer. Proceedings of the IFAC Workshop on Fault Detection and Safe in Chemical Plants, 153-157.
58.
Hou, M. and Müller, P. C.1992: Design of observers for linear systems with unknown inputs’. IEEE Transactions in Automatic Control37, 871-875.
59.
Hou, M. and Müller, P. C.1995: Fault detection and isolation observer. International Journal of Control60, 827-846.
60.
Hou, M.. and Patton, R. J. 1996: An LMI approach to H./H∞ observers. Proceedings of the IEE Conference Control96-96.
61.
Isermann, R.1984: Process fault detection based on modeling and estimation methods - a survey. Automatica20, 387-404.
62.
Isermann, R. 1991: Fault diagnosis of machines via parameter estimation and knowledge processing. SAFEPROCESS ’91, Baden-Baden, 121-133.
63.
Isermann, R. and Balle, P. 1996: Trends in the application of model based fault detection and diagnosis of technical processes (Survey). Proceedings of the 13th IFAC World Congresss, Vol. N, 1-12.
64.
Isermann, R., Ernst and Nelles, O. 1997: Identification with dynamic neural networks - architectures, comparisons, applications. Prepants of the IFAC Symposium on System Identification, Fukuoka, Vol. 3, 997-1022.
65.
Jang, J.-S. R. and Sun, C.-T.1995: Neuro-fuzzy modeling and control. Proceedings of the IEEE83, 378-405.
66.
Jones, L. 1973: Failure detection in linear systems. Ph.D. Dissertation, MIT, Cambridge, MA.
67.
Joo, Y. H., Hwang, H. S., Kim, K. B. and Woo, K. B.1997: Fuzzy systems modeling by fuzzy partition and GA hybrid schemes. Fuzzy Sets and Systems86, 279-288.
68.
Kandel, A.1986: Fuzzy mathematical techniques with applications. Massachusetts: Addison-Wesley.
69.
Kinnaert, M., Peng, Y. and Hammouri, H. 1995: The fundamental problem of residual generation for bilinear systems up to output injection. Proceedings of the European Control Conference, 3777-3782.
70.
Kiupel, N., Köppen-Seliger, B., Schulte Killinghaus, H. and Frank, P. M. 1995: Fuzzy residual evaluation concept. Proceedings of the IEEE International Conference on Systems, May, and Cybernetics, Vancouver, Vol. 1, 13-18.
71.
Kiupel, N. and Frank, P. M. 1996a: An algorithm for a filter design for fuzzy supervision. Preprints of the World Automation Congress, Montpellier, Vol. 1, 417-422.
72.
Kiupel, N. and Frank, P. M. 1996b: Fuzzy supervision for an anaerobic waste-water plant. Preprints of the IEEE Conference on Computational Engineering in Systems Applications, Lille, Vol. 1, 362-367.
73.
Köppen-Seliger, B. 1997: Fehlerdiagnose mit künstlichen neuronalen Netzen, Düsseldorf: VDI-Verlag, Fortschritt-Berichte VDI, Reihe 8, No. 632.
74.
Lou, X. C.Willsky, A. S. and Verghese, G. C.1986: Optimally robust redundancy relations for failure detection in uncertain systems. Automatica22, 333-344.
75.
Liu, B. and Si, J.1997: Fault isolation filter design for linear time-invariant systems. IEEE Transactions in Automatic Control, AC- 42, 704-707.
76.
Mangoubi, R. S.1998: Robust estimation and failure detection. Berlin: Springer-Verlag.
77.
Marcu, T.1996: Pattern recognition techniques using fuzzily labeled data for process fault diagnosis. Journal of Applied Mathematics and Computer Science6, 815-840.
78.
Marcu, T. and Mirea, L.1997: Robust detection and isolation of process faults using neural networks. IEEE Control Systems17, 72-79.
79.
Marcu, T., Mirea, L. and Frank, P. M.1999a: Development of dynamic neural networks with application to observer-based fault detection and isolation. Journal of Applied Mathematics and Computer Science9, 547-570.
80.
Marcu, T., Ferariu, L. and Frank, P. M. 1999b: Genetic evolving of dynamic neural networks with application to process fault diagnosis. UECA/IFAC/IEEE European Control Confernece, Karlsruhe, CD-ROM Proceedings.
81.
Massoumnia, M. A.1986: A geometric approach to the synthesis of failure detection filters. IEEE Transactions in Automatic Control9, 839-846.
82.
Mendel, J. M.1995: Fuzzy logic systems for engineering. Proceedings of the IEEE83, 345-376.
83.
Nelles, O. and Fischer, M. 1996: Local linear model treees (LOLIMOT) for nonlinear system identification of a cooling blast. Preprints of the European Congresss on Intelligent Techniques and Soft Computing, Aachen, Vol. 2, 1187-1191.
84.
Niemann, H. H. and Stroustrup, J. 1996: Filter design for failure detection and isolation in the presence of modeling errors and disturbances. Proceedings of the 35th CDC, 1155-1160.
85.
Nikoukhau, R.1994: Innovations generation in the presence of unknown inputs: application to robust failure detection. Automatica30, 1851-1867.
86.
Patton, R. J. 1993: Robustness issues in fault-tolerant control. Proceedings of TOOLDIAG ’93, 1080-1110.
87.
Patton, R. J. 1994: Robust model-based fault diagnosis: the state of the art. Proceedings SAFEPROCESS 94, 1-27.
88.
Patton, R. J. and Chen, J. 1991a: A review of parity space approaches to fault diagnosis. Proceedings of the IFAC/IMACS Symposium SAFEPROCESS, Baden-Baden.
89.
Patton, R. J. and Chen, J. 1991b: Optimal selection of unknown input distribution matrix in the design of robust observers for fault diagnosis. Proceedings of the IFAC/IMACS Symposium SAFEPROCESS, Baden-Baden.
90.
Patton, R. J. and Hou, M. 1996: A matrix pencil approach to fault detection and isolation observers. Proceedings of the 13th IFAC World Congress, San Francisco.
91.
Patton, R. J., Frank, P. M. and Clark, R. N. editors. 1989: Fault diagnosis in dynamic systems, theory and application. Englewood Cliffs, New Jersey: Prentice Hall.
92.
Patton, R. J. and Kangethe, S. M.1989: Robust fault diagnosis using eigenstructure assignment of observers. In: Patton, R. J., Frank, P. M. and Clark, R. N., editors, Fault diagnosis in dynamic systems. Englewood Cliffs, New Jersey: Prentice Hall, 99-154.
Peltier, M. A. and Dubuisson, B. 1994: A fuzzy diagnosis process to detect evolution of a car driver’s behaviour. Preprints of the IFAC Symposium on Fault Detection, Supervision and Safety for Technical Processes, Espoo, Vol. 2, 786-801.
95.
Qiu, Z. and Gertler, J. 1993: Robust FDI systems and H∞ optimization. Proceedings of the 32nd CDC, 1710-1715.
96.
Querelle, R., Noura, H., Kremer, N., Sauter, D. and Frank, P. M. 1997: Fault diagnosis on a winding-machine. Preprints of the IFAC Symposium on Fault Detection, Supervision and Safety for Technical Processes, Kingston upon Hull, Vol. 1, 480-485.
97.
Russo, M.1998: FuGeNeSys - a fuzzy genetic neural system for fuzzy modeling. IEEE Transactions in Fuzzy Systems6, 373-388.
98.
Sadrnia, M. A., Chen, J. and Patton, R. J. 1997: Robust Hinfty/mu observer-based residual generation for fault diagnosis. Proceedings of the IFAC Symposium SAFEPROCESS ’97, 155-162.
99.
Sauter, D., Rambeaux, F. and Hamelin, F. 1997: Robust fault diagnosis in a Hinfty setting. Proceedings of the IFAC Symposium SAFEPROGRESS ’97, 867-874.
100.
Schreier, G., Ragot, J., Patton, R. J. and Frank, P. M. 1997: Observer design for a class of nonlinear systems. Proceedings of the IFAC Symposium SAFEPROCESS ’97, 483-488.
101.
Seliger, R. and Frank, P. M. 1991a: Fault diagnosis by disturbance decoupled nonlinear observers. In: Proceedings of the 30th IEEE CDC, Vol. 3, 2248-2253.
102.
Seliger, R. and Frank, P. M. 1991b: Robust component fault detection and isolation in nonlinear dynamic systems using nonlinear unknown input observers. Preprints of the IFAC/IMACS Symposium SAFEPROCESS ’91, Vol. 1, 313-338, Baden-Baden.
103.
Seliger, R. and Frank, P. M. 1993: Robust residual evaluation by threshold selection and a performance index for nonlinear observer-based fault diagnosis. International Conference on Fault Diagnosis (Tooldiag ’93), 496-504.
104.
Shen, Q. and Leitch, R.1993: Fuzzy qualitative simulation. IEEE Transactions on Systems, Man, and Cybernetics23, 1038-1064.
105.
Shields, D. N. 1996: Quantitative approaches for fault diagnosis based in bilinear systems. Proceedings of the 13th IFAC World Congress, 151-156.
106.
Sorsa, T. and Koivo, H. N.1993: Application of artificial neural networks in process fault diagnosis. Automatica29, 843-849.
107.
Takagi, T. and Sugeno, M.1985: Fuzzy identification of systems and its application to modeling and control. IEEE Transactions on Systems, Man, and Cybernetics15, 116-132.
108.
Taylor, J. H. and Luce, E. C.1987: A frequency domain approach to failure detection and isolation with application. Control-theory and advanced technology3, 45-72.
109.
Tsui, T. C.1989: On the solution to the state failure detection problem. IEEE Transactions on Automatic Control34, 1017-1018.
110.
Tzafestes, S. G., Singh, M. and Schmidt, G., editors. 1986: System fault diagnosis, reliability and related knowledge based approached. Dordrecht: D. Reidel.
111.
Vaidyanathan, R. and Venkatasubramanian, V.1992: Representing and diagnosing process data using neural networks. Engineering Application of Artificial Intelligence5, 11-21.
112.
Viswanadham, N. and Srichander, R.1987: Fault detection using unknown input observers. Control Theory and Advanced Tehcnology3, 91-101.
113.
Viswanadham, N., Sarma, V. V. S. and Singh, M. G.1987a: Reliability of computer control systems. Amsterdam: North Holland Systems and Control Series, Vol. 8.
114.
Viswanadham, N., Taylor, J. H. and Luce, E. C.1987b: A frequency domain approach to failure detection and isolation with application. Control-theory and advanced technology3, 45-72.
115.
White, J. E. and Speyer, J. L.1987: Detection filter design: spectral theory and algorithms. IEEE Transactions in Automatic Control, AC- 32, 593-603.
116.
Williams, R. J. and Zipser, D.1990: Gradient-based learning algorithms for recurrent connectionist networks. Technical Report NUCCS-90-9, Northeastern University, College of Computer Science, Massachusetts.
117.
Willsky, A. S.1976: A survey of design methods for failure detection in dynamic systems. Automatica12, 601-611.
118.
Wünnenberg, J. 1990: Observer-based fault detection in dynamic systems. Dissertation, Universitaet Duisburg, Fachgebiet Mess- und Regelungstechnik 1990, Fortschrittsberichte VDI, Reihe 8, No. 222, VDI Verlag Duessseldorf.
119.
Yang, H. and Saif, M. 1995: Nonlinear adaptive observer design for fault detection. Proceedings of the American Control Conference, 1136-1139.
120.
Yu, D. and Shields, D. N.1996: Bilinear fault detection observer and its application to a hydraulic system. International Journal of Control64, 1023-1047.
121.
Wu Zhuang, Z. and Frank, P. M.1997: Qualitative observer and its application to fault detection and isolation systems. Proceedings of the Institute of Mechanical Engineers211, 253-262.
122.
Zimmermann, J. H.1991: Fuzzy Set Theory and Its Applications. Massachusetts, Boston, Dordrecht, London: Kluwer.
