Chlorinated polyethylene (CPE) is used as an impact modifier for polypropylene (PP). Hytrel (a polyether ester block copolymer) acts as a compatibiliser for the system. Hytrel modified blends show good improvement in mechanical properties compared to unmodified blends. The modified blends can also accept 20% calcium carbonate filler without seriously affecting the tensile strength.
Get full access to this article
View all access options for this article.
References
1.
1. Paul, D. R. and S. Newman. 1978. Polymer Blends, Vol. 2. New York: Academic.
2.
2. Galli, P., S. Danesi and T. Simonazzi. 1984. Polym. Eng. Sci, 29:544.
3.
3. Jang, B. Z., D. R. Uhlmann and J. B. Vander Sande. 1985. J. Appl. Polym. Sci., 30:2485.
4.
4. Martuscelli, E., C. Silvestre and L. Bianchi. 1983. Polymer, 24:1458.
5.
5. Karger-Koesis, J. and V. N. Kuleznev. 1982. Inter Polym. Sci. Technol., 9(11):T/43.
6.
6. Lohes, D. J.1986. Polym. Eng. Sci, 26:11.
7.
7. Riess, G.1987. Thermoplastic Elastomers, N. R. Legg, G. Holden and H. E. Schroeder (eds.), Munich: Carl Hanser Verlag.
8.
8. Bucknall, C. B.1989. Comprehensive Polymer Science, Vol. 7, S. L. Aggarwal (ed.), Pergamon Press, U.K.
