The needs for laboratory size reaction injection molding (RIM) equipment are reviewed. Three application areas are identified: process development, chemi cal system development and chemical system research with interface to analyt ical instruments. The size of the machine, its flexibility and quantity of reac tants required for each of these areas is reviewed. Commercially available machines, those described in the literature, and several built at the University of Minnesota are compared. Polyurethane RIM properties from lab scale machines show good agreement with production parts. Our "micro RIM" machine for chemical system research is described in detail. Equations for pressure drop and viscous heating are given.
Macosko, C.W.RIM: Fundamentals of Reaction Injection Molding. Munich:Hanser (1988).
3.
Becker, W E., ed. Reaction Injection Molding. New York:Van Nostrand Reinhold ( 1979).
4.
Sweeney, F.M.Reaction Injection Molding Machinery and Processes. New York:Marcel Dekker (1987).
5.
Grigsby, R.A., Jr. and D.M. Rice."Some Recent Advances in Polyurea RIM," Polyurethanes Exploring New Horizons, Proceeding of the SPI 30th Annual Technical/Marketing Conference, October 15-17, 1986, Toronto, Canada (1986).
6.
Kirkland, C. "Is Polyurea the Key to Automated RIM Processing ," Plastics Technology, 3:83-88 (1986).
7.
Lewis, G.D. "A New Generation of High Productivity RIM Equipment," Polyurethanes Exploring New Horizons, Proceedings of the SPI 30th Annual Technical/Marketing Conference, October 15-17, 1986, Toronto, Canada (1986).
8.
Mueller, G. "High Performance RIM and RRIM Process Equipment," Polyurethanes Exploring New Horizons, Proceeding of the SPI 30th Annual Technical/Marketing Conference, October 15-17, 1986, Toronto, Canada (1986).
9.
Lee, L.J. and C.W. Macosko."Design and Characterization of a Small Reaction Injection Molding Machine" Soc. Plast. Eng. Tech. Papers , 24:151 (1979).
10.
Macosko, C.W. and L.J. Lee."Reaction Injection Molding Machine," US Patent4,189,070 (1980).
11.
Lipshitz, S.D., Ph.D. Thesis, Dept. of Chem. Eng. and Mat. Sci., Univ. of Minnesota (1976).
12.
Ishida, H. and C. Scott."Fast Polymerization and Crystallization Kinetics of Nylon 6 by Combined Use of Computerized Micro-RIM Machine and FT-IR,"Polym. Eng., 6:201 (1986).
13.
Vespoli, N.P. and L.M. Alberino. "Comparison of Rheological Measurements During Mold Filling for Glycol and Amine Extended Urethane Systems," Elastomers and Plastics, 17:173 (1985).
14.
Vespoli, N.P. , L.M. Alberino, A.D. Peterson and J.H. Ewen. "Molding Filling Studies of Polyurea RIM Systems," Elastomers and Plastics, 18:159 (1986).
15.
Charbonneaux, T.G., K.J. Mikkelsen and C.W. Macosko. "Continuous Reactive Dispensing of Crosslinkable Monomers," Paper 29h presented at AIChE, New York City (November, 1987
16.
Macosko, C.W. and D.B. McIntyre. "RIM Mixhead," US Patent4,473,531 (1984).
17.
Ex-Cell-O Corporation, Micromatics Operation "Mini RIM Metering System," flyer PMS 1007-5M85;345 East 48th St., Holland, MI 49423.
18.
Blake, J.W. , W.P. Yang, R.D. Anderson and C.W. Macosko. "Adiabatic Reactive Viscometry for Polyurethane Reaction Injection Molding," Polym. Eng. Sci ., 27:16 (1987).
19.
The Martin Sweets Company, Inc. "Mini-RIM Flexamatic HP-6," Form 8592-478-2MBox 1068,; Louisville, KY 40201.
20.
Admiral Equipment Co. "MHY-T-RIM ," Form 28105; 305 West North St., Akron, Ohio 44303.
21.
HI-TECH Product Literature; 4549 40th St, S.E., Grand Rapids, MI 49508.
22.
Richter, E.B. and C.W. Macosko. "Kinetics of Fast (RIM) Urethane Polymerizations,"Polym. Eng. Sci., 18:1012-1018 (1978).
23.
Pannone, M.C. and C.W. Macosko."Reaction Kinetics of a Polyurea RIM System," Polym. Eng. Sci., 28 (1988).
24.
Kolodziej, P. , M.S. Thesis, University of Minnesota (1980).
25.
Project Maintenance Manual, Mobay Project #5222 Metering Unit , University of Minnesota (November 1984).
26.
Yang, P.W. and C.W. Macosko."Phase Separation during Fast (RIM) Polyurethane Polymerization " presented at First Meeting of European Polymer Federation, Lyon, France, September 14-18 (1987
27.
Sandell, D.J. , M.S. Thesis, University of Minnesota (1983).
28.
Charbonneaux, T.G., Ph.D. Thesis, University of Minnesota (1988).
