Glass content, in all modes of stress application, is the most powerful of factors in the improvement of all aspects of SMC behavior. Proper selection of resin/glass-type combinations for maximum compatibil ity is a major formulation concern. The improvements due to thickening by in-situ formed urethane of ITP resins are demonstrated.
Get full access to this article
View all access options for this article.
References
1.
L.E. Nielsen, Mechanical Properties of Polymers, Reinhold Publishing Corporation, New York, 1962.
2.
I.M. Ward, Mechanical Properties of Solid Polymers, Wiley-Interscience , New York, 1972.
3.
D.A. Riegner, B.A. Sanders, "Characterization Study of Automotive Continuous and Random Glass Fiber Composites", 1979National Technical Conference, Society of Plastics Engineers
4.
D.L. Denton, "Mechanical Properties Characterization of an SMC-R50 Composite", 34th Annual Conference, 1979, RP-C Institute, SPI.
5.
J.H. Enos, R.L. Erratte, E. Francis and R.E. Thomas, "Structural Performance of Vinyl Ester Resin Compression Molded High Strength Composites", 34th Annual Conference, 1979, RP-C Institute, SPI.
6.
R.D. Farris, R.J. Jackson and W.V. Breitigam, "A Thickenable Premium Vinyl Ester for SMC Applications", 35th Annual Conference, 1980, RP-C Institute, SPI.
7.
R.C. Allen, "Low Density SMC: Evolution Through Challenge", 35th Annual Conference, 1980, RP-C Institute, SPI.
8.
G.E. Owen, "Assessing the Effects of Resin Type and Glass Content on FRP Impact Resistance", 35th Annual Conference, 1980, RP-C Institute, SPI.
9.
J.A. Reitz, III, J. Ferrarini and J. Feltzin, "Impact Toughness Evaluations For Ranking Composites For Automotive Use", 1979 Natec SPE (1979).
10.
O. Davies, ed., The Design and Analysis of Industrial Experiments, Hafner Publishing Company, New York (1960).
11.
J. Ferrarini , D.M. Longenecker, N.N. Shah, J. Feltzin and G.G. Greth, "Development of a Unique Method for the Preparation of High Quality SMC", 33rd Annual Conference , 1978, RP-C Institute, SPI.
12.
J. Ferrarini, J.A. Magrans and J.A. Reitz III, "New Resins for High Strength SMC", 34th Annual Conference, 1979, RP-C Institute, SPI.
