Synergistic anti-reversion effects of bis-citraconimides and HTS in natural rubber vulcanizates: A comparative study

Abstract

This study investigates the synergistic effects of novel citraconimide-based additives, N,N'-p-phenylene-biscitraconimide (BCmB) and bis(2-citraconimide phenyl) disulfide (BCoPD), combined with hexamethylene-1,6-bis(thiosulfate) disodium salt (HTS) in natural rubber (NR)/copper-plated steel wire composites typically utilized in radial tire applications. Both additives were designed and synthesized based on the structural insights from the commercial anti-reversion agent 1,3-bis(citraconimidomethyl)benzene (BCDB). The curing characteristics, crosslinking network structure, mechanical properties, thermal oxidative stability, heat build-up, dynamic mechanical properties, and adhesion strength of NR compounds with these additives were comprehensively analyzed. Quantum chemical calculations and kinetic analyses elucidated the reaction mechanisms and reactivity patterns during vulcanization and over-vulcanization processes. Results indicate that BCmB and BCoPD significantly enhance the overall crosslink density, adhesion strength, and initial mechanical performance compared to BCDB. BCoPD, in particular, provides superior adhesion to copper-plated steel wire through both enhanced crosslinking density and direct interfacial bonding facilitated by disulfide linkages. Although BCDB demonstrated superior long-term anti-reversion performance due to its persistent reactive sites enabling Diels–Alder reactions, BCoPD exhibited the best overall adhesion and aging resistance. Scanning electron microscopy (SEM) and energy-dispersive spectroscopy (EDS) confirmed cohesive failure within the rubber matrix, indicative of strong interfacial adhesion. This research presents novel citraconimide-based additives as promising materials for achieving improved tire performance, durability, and sustainability.

Keywords

Bis-Citraconimides HTS natural rubber anti-reversion adhesion performance

Get full access to this article

View all access options for this article.

References

Bertelsen

CM.

Rubber-to-metal bonding: an investigation of chemical reactions and adhesion at the interface. University of Cincinnati ProQuest Dissertations & Theses, 2001.

Ignatz-Hoover

Terrill

. Redesigning OTR compounds with anti-reversion chemistry for reduced heat build-up, improved performance. Rubber World 2009; 241(2): 32–37.

Poh

Kwok

Lim

. Reversion behaviour of epoxidized natural rubber. Eur Polym J 1995; 31(3): 223–226.

Coran

. Chemistry of the vulcanization and protection of elastomers: a review of the achievements. J Appl Polym Sci 2002; 87(1): 24–30.

. Reaction kinetics in differential thermal analysis. Anal Chem 1957; 29: 1417–1421.

Ozawa

. A new method of analyzing thermogravimetric data. Bull Chem Soc Jpn 1965; 38(11): 1881–1886.

Flory

. Statistical mechanics of swelling of network structures. J Chem Phys 1950; 18: 108–111.

Mullins

. Determination of degree of crosslinking in natural rubber vulcanizates. Part I. J Polym Sci 1956; 19(92): 225–236.

Choi

S-S

Kim

. A novel system for measurement of types and densities of sulfur crosslinks of a filled rubber vulcanizate. Polym Test 2015; 42: 62–68.

10.

Zou

Chen

, et al. Comparative study of different bis-citraconimides as anti-reversion agents in natural rubber. J Elastomers Plast 2023; 55(1): 46–66.

11.

Ding

Leonov

. A kinetic model for sulfur accelerated vulcanization of a natural rubber compound. J Appl Polym Sci 1996; 61(3): 455–463.

12.

Fan

Zhang

, et al. Effect of high-temperature curing on the crosslink structures and dynamic mechanical properties of gum and N330-filled natural rubber vulcanizates. Polym Test 2001; 20(8): 925–936.

13.

Fan

. Study on crosslink structures and dynamic mechanical properties of NR vulcanizates under different curing and aging conditions. In: Research Institute of Polymer Materials. Shanghai, China: Shanghai Jiaotong University, 2001.