This study involved the plasma surface modification of polyethylene with gliding arc plasma at atmospheric pressure to enhance the adhesion of labels to these surfaces and prevent label detachment. Optical emission spectroscopy (OES) analysis was conducted to identify the plasma elements. Contact angle measurement was done to evaluate the surface hydrophilicity. The water contact angle was 66.53° before surface treatment and decreased to 46.96° after 40 s treatment, confirming the improvement of the hydrophilic behavior of the surface. Surface free energy calculation indicated that the surface free energy was raised from 42.20 mJ.m−2 to 60.32 mJ.m−2 after plasma treatment. Changes in the physico-chemical properties of the surfaces were investigated using various analyses such as XPS, AFM, and SEM. XPS verified the formation of oxygen-containing functional groups on the surface. SEM showed an increase in pores and surface protrusions, and AFM confirmed an increase in roughness from 47.18 nm to 59.87 nm after plasma treatment. Conventional adhesion tests, including loop tack, peel, static and dynamic shear tests, corroborated the enhanced adhesion properties of the plasma-treated samples.
AguiarPHLOliveiraECCruzSA. Modification of clarified polypropylene by oxygen plasma to improve the adhesion of thin amorphous hydrogenated carbon films deposited by plasma enhanced chemical vapor deposition. Polym Eng Sci2013; 53: 1065–1072.
2.
HeJWangYQianY, et al.Surface modification of ultra-high-molecular-weight polyethylene and applications : a review. Polymers2024; 16: 3431–3518.
3.
SmirnovSAShikovaTGKholodkovIV, et al.Plasma-chemical modification of polyethylene surface for copolymerization with diallyldimethylammonium chloride. High Energy Chem2024; 58: 435–439. DOI: 10.1134/S0018143924700358.
4.
TamaiTWatanabeMKobayashiY, et al. Surface modification of polyethylene naphthalate substrates by ultraviolet light-irradiation and assembling multilayers and their application in electroless deposition: the chemical and physical properties of the stratified structure. Colloids Surf A. 2019; 575: 230–236. doi:10.1016/j.colsurfa.2019.05.017.
5.
PopelkaAKhanamPNAlmaadeedMA. Surface modification of polyethylene / graphene composite using corona discharge. J Phys D Appl Phys2018; 51: 105302.
6.
ZhangSLiuYLvS, et al.Surface modification of polymers by ion irradiation: reactivity principle and application. Nucl Instruments Methods Phys Res Sect B2023; 543: 165097.
DarvishFMostofi SarkariNKhaniMR, et al.Direct plasma treatment approach based on non-thermal gliding arc for surface modification of biaxially-oriented polypropylene with post-exposure hy-drophilicity improvement and minus aging effects. Appl Surf Sci2020; 509: 144815.
9.
MrsicIBäuerleTUlitzschS, et al. Oxygen plasma surface treatment of polymer films—Pellethane 55DE and EPR-g-VTMS. Appl Surf Sci. 2021; 536: 147782. doi:10.1016/j.apsusc.2020.147782.
10.
PrimcGMozetiˇM. Surface modification of polymers by plasma treatment for appropriate adhesion of coatings. Materials2024; 17: 1494–1517.
11.
SubediDPGuragainRPJoshiUM. Surface modification of polymers by 50 Hz dielectric barrier discharge ( DBD ) plasma produced in air at 40 Torr. Fundam Plasma Phys2024; 10: 100058. DOI: 10.1016/j.fpp.2024.100058.
12.
VajpayeeMSinghMSoniK, et al.Study of synergistic effect of pre-enzyme treatment and dielectric barrier discharge plasma for surface modification of cellulosic textile polymer. Int J Biol Macromol2025; 307: 141879. DOI: 10.1016/j.ijbiomac.2025.141879.
13.
MandolfinoCLertoraEGambaroC, et al.Improving adhesion performance of polyethylene surfaces by cold plasma treatment. Meccanica2014; 49: 2299–2306.
14.
Van DeynseACoolsPLeysC, et al.Surface modification of polyethylene in an argon atmospheric pressure plasma jet. Surf Coat Technol2015; 276: 384–390.
15.
E AbusrafaAHabibSKrupaI, et al.Modification of polyethylene by RF plasma in different/mixture gases. Coatings2019; 9: 145.
16.
MostofiSNDarvishFMohseniM, et al.Surface characterization of an organosilane-grafted moisture-crosslinked polyethylene compound treated by air atmospheric pressure non-equilibrium gliding arc plasma. J Appl Polym Sci2019; 490: 436–450.
17.
PankajSKBueno-FerrerCMisraNN, et al.Applications of cold plasma technology in food packaging. Trends Food Sci Technol2014; 35: 5–17.
18.
VatanpourVCastro-MuñozRKeskinB, et al.Plasma in fabrication and modification of polymeric membranes. Desalination2025; 599: 118444. DOI: 10.1016/j.desal.2024.118444.
19.
ShokriBMohseniMEbrahimiM, et al.Direct plasma treatment approach based on non-thermal gliding arc for surface modification of biaxially-oriented polypropylene with post- exposure hydrophilicity improvement and minus aging effects. Appl Surf Sci2019; 509: 144815. DOI: 10.1016/j.apsusc.2019.144815.
20.
DimitrakellisPFaubertFWartelM, et al.Plasma surface modification of epoxy polymer in air DBD and gliding Arc. Processes2022; 10: 104.
21.
BabaeiMHosseiniSIAbbasi-FirouzjahM, et al.Physico-chemical surface modification of the natural leather using gliding arc discharge: an in-depth analysis of improving surface and mechanical properties. Surf Interfaces2024; 44: 103702.
22.
PandiyarajKNSelvarajanVDeshmukhRR, et al.Low-Pressure DC glow discharge air plasma surface treatment of polyethylene (PE) film for improvement of adhesive properties. Plasma Sci Technol2013; 15: 56–63.
23.
QuXWangNLovellPA. Preparation and characterization of the latexes with different particle sizes by semibatch emulsion polymerization and the influence on properties of waterborne pressure-sensitive adhesives. J Appl Polym Sci2009; 112: 3030–3040.
24.
ManakhovAMSolovievaAOPermyakovaES, et al.Adhesion and proliferation of mesenchymal stem cells on plasma-coated biodegradable nanofibers. J Compos Sci2022; 6: 193.
25.
Valinataj OmranAPulpytelJSohbatzadehF, et al.Cell repellent coatings on inner walls of tubes by means of transporting discharge in atmospheric pressure. Plasma Chem Plasma Process2019; 39: 1181–1190. DOI: 10.1007/s11090-019-10000-1.
26.
LipovkaARodriguezRBolbasovE, et al.Time-stable wetting e ff ect of plasma-treated biodegradable sca ff olds functionalized with graphene oxide. Surf Coat Technol2020; 388: 125560. DOI: 10.1016/j.surfcoat.2020.125560.
27.
ZhangZMoradinikNHatzikiriakosSG. The peel strength ( cohesive / adhesive ) of amine-associating polymers. Polymer2025; 326: 128337. DOI: 10.1016/j.polymer.2025.128337.
28.
KhanjaniJZohuriGHGholamiM, et al.Emulsion semi-batch terpolymerization process using hybrid emulsifiers for synthesizing new emulsion pressure sensitive adhesives (EPSAs). J Adhes2014; 90: 174–194.
29.
SongMALeeYWChungTH. Characterization of an inductively coupled nitrogen-argon plasma by Langmuir probe combined with optical emission spectroscopy. Phys Plasmas2011; 18: 023504.
30.
TewariSVKshirsagarRJAmitavaR, et al.Optical emission spectroscopy study on flashover along insulator surface due to particle contamination. J Laser Part Beams2014; 32: 681–689.
31.
SaadatiFMahdikiaHAbbaszadehHA, et al.Comparison of direct and indirect cold atmospheric-pressure plasma methods in the B16F10 melanoma cancer cells treatment. Sci Rep2018; 8: 7689–7814.
32.
VujoševiDMozetiMCvelbarU, et al.Optical emission spectroscopy characterization of oxygen plasma during degradation of Escherichia coli. J Appl Phys2007; 101: 103305.
