A design of experiment study to investigate the effects of hardener concentration,stirring time,and air bubbles on the tensile strength of epoxy resin

Abstract

Epoxy is one of the widely used polymeric resin systems in composite industries, which is a two-part resin system that requires the mixing of a hardening agent to trigger the polymerization process. The mixing ratio and pot-life are usually specified and provided by the manufacturer; however, the stirring time and the details of the mixing process were left to the fabricator to configure, based on some visual observations, which may vary from person to person. Although the mixing ratio is fixed by the resin manufacturer, errors may occur during the weighing and transfer of resin parts. The hardener concentration and stirring time are two of the most important factors that can affect the resin properties. In addition, air bubbles can be formed during the stirring process, which is inevitable. Design of experiment (DOE) is one of the widely used tools to design, control, and study the effects of multiple factors. In this research, DOE with a factorial design of 2³⁻¹ (2^k−1) was used to study the effects of hardener concentration, stirring time, and air bubbles on the tensile strength of epoxy resin. Test specimens were fabricated, cut, and tested as per ASTM D638 standard (i.e., common test performed in the industry for plastics) in a randomized order and then the results were statistically analyzed using Design-Expert software. The test results showed that all three factors significantly affect the tensile strength of the epoxy, and they should be carefully optimized and used for the fabrication of composite materials with optimal properties.

Keywords

Fabrication testing mechanical properties design of experiment epoxy resin mixing ratio stirring time

Get full access to this article

View all access options for this article.

References

Bagotia

Choudhary

Sharma

. Studies on toughened polycarbonate/multiwalled carbon nanotubes nanocomposites. Compos B Eng 2017; 124: 101–110. DOI: 10.1016/j.compositesb.2017.05.037.

Sritharan

Askari

. Enhancing the short-beam strength of composite laminates using helical carbon nanotubes. Compos Part B Eng 2021; 221: 108999. DOI: 10.1016/j.compositesb.2021.108999.

Sritharan

Askari

. Effects of helical carbon nanotubes on mechanical performance of laminated composites and bonded joints. SAE Int J Adv Curr Pract Mobil 2020; 2(3). Art. no 2020-01–0029. DOI: 10.4271/2020-01-0029.

EPON Resin 815C | Epon 815C Epoxy Resin Blend | Hexion. Miller-Stephenson Chemicals. https://miller-stephenson.com/product/epon-815c/ (2016, accessed 9 January 2020).

EPIKURE 3282 | Epikure 3282 Curing Agent | Modified Aliphatic Amine. Miller-Stephenson Chemicals. https://miller-stephenson.com/product/epikure-3282/ (2016, accessed 9 January 2020).

Vijayan

Ghazinezami

Taklimi

, et al. The geometrical advantages of helical carbon nanotubes for high-performance multifunctional polymeric nanocomposites. Compos Part B Eng 2019; 156: 28–42. DOI: 10.1016/j.compositesb.2018.08.035.

Sritharan

Taklimi

Ghazinezami

, et al. Mechanical properties improvement of polymeric nanocomposites reinforced with chemically treated helical carbon nanotubes: influence of sonication time and molarities of nitric-sulfuric-hydrochloric acids. In: Proceedings of CAMX 2018, October 2018, TP18-0378, 1–14.

Salehi

Noordermeer

JWM

Reuvekamp

LAEM

, et al. Parameter optimization for a laboratory friction tester to predict tire ABS braking distance using design of experiments. Mater Des 2020; 194: 108879. DOI: 10.1016/j.matdes.2020.108879.

Atiq Ur Rehman

Bastan

Haider

, et al. Electrophoretic deposition of PEEK/bioactive glass composite coatings for orthopedic implants: a design of experiments (DoE) study. Mater Des 2017; 130: 223–230. DOI: 10.1016/j.matdes.2017.05.045.

10.

Raghukandan

Senthilvelan

. Analysis of P/M hollow extrusion using design of experiments. J Mater Process Technol 2004; 153(154): 416–419. DOI: 10.1016/j.jmatprotec.2004.04.362.

11.

Park

Ahn

J-H

. Design of experiment considering two-way interactions and its application to injection molding processes with numerical analysis. J Mater Process Technol 2004; 146(2): 221–227. DOI: 10.1016/j.jmatprotec.2003.10.020.

12.

Hassan

Bataineh

Abed

. The effect of time and temperature on the precipitation behavior and hardness of Al–4wt%Cu alloy using design of experiments. J Mater Process Technol 2008; 204(1): 343–349. DOI: 10.1016/j.jmatprotec.2007.11.047.

13.

Gunasegaram

Farnsworth

Nguyen

. Identification of critical factors affecting shrinkage porosity in permanent mold casting using numerical simulations based on design of experiments. J Mater Process Technol 2009; 209(3): 1209–1219. DOI: 10.1016/j.jmatprotec.2008.03.044.

14.

Schaefer

Gierszewski

Kollmannsberger

, et al. Analysis and improved process response prediction of laser- assisted automated tape placement with PA-6/carbon tapes using design of experiments and numerical simulations. Compos A Eng 2017; 96: 137–146. DOI: 10.1016/j.compositesa.2017.02.008.

15.

Pourmortazavi

Sahebi

Zandavar

, et al. Fabrication of Fe3O4 nanoparticles coated by extracted shrimp peels chitosan as sustainable adsorbents for removal of chromium contaminates from wastewater: The design of experiment. Compos Part B Eng 2019; 175: 107130. DOI: 10.1016/j.compositesb.2019.107130.

16.

Todoroki

Ishikawa

. Design of experiments for stacking sequence optimizations with genetic algorithm using response surface approximation. Compos Struct 2004; 64(3): 349–357. DOI: 10.1016/j.compstruct.2003.09.004.

17.

Davim

Reis

. Study of delamination in drilling carbon fiber reinforced plastics (CFRP) using design experiments. Compos Struct 2003; 59(4): 481–487. DOI: 10.1016/S0263-8223(02)00257-X.

18.

Montgomery

. Design and Analysis of Experiments. Wiley, 2012.

19.

Barker

Milivojevich

. Quality by Experimental Design. CRC Press, 2016.

20.

Durakovic

. Design of experiments application, concepts, examples: state of the art. Period Eng Nat Sci 2017; 5(3). Art. no. 3. DOI: 10.21533/pen.v5i3.145.

21.

Jankovic

Chaudhary

Goia

. Designing the design of experiments (DOE) – An investigation on the influence of different factorial designs on the characterization of complex systems. Energy Build 2021; 250: 111298. DOI: 10.1016/j.enbuild.2021.111298.