Estimation of adhesive wear behavior of the glass fiber reinforced polyester composite materials using ANFIS model

Abstract

Glass fiber reinforced polyester (GFRP) composite materials are widely used in various applications. The prediction of wear values for composite materials is very complex and nonlinear phenomena. Artificial intelligence methods (AI) and expert systems such as artificial neural networks (ANNs) and fuzzy inference systems (FIS) have a series of properties on modeling nonlinear systems. In some situations, ANNs are insufficient under abrupt changes in input variables. Adaptive Neuro Fuzzy Inference System (ANFIS) is capable of integrating the linguistic expressions of FIS with the adaptation and learning skills of the ANNs. The aim of this study is to determine the optimum material content and working conditions in terms of wear resistance. This study proposes an ANFIS sub-clustering based prediction model for estimation of wear behavior of GFRP composites within various concentrations of materials and under diverse loads and speeds. Proposed ANFIS model extracted optimum concentrations and operating parameters to obtain the minimum wear rate. Due to the wear rate estimation model, optimum wear rate value is reached to 25.0013 (mm³/Nm)*10⁻⁶ at CaCO₃, polystyrene, glass fiber, glass bead, alumina, load and speed values of 49%, 0%, 11%, 10%, 0.8%, 10 N and 100 rpm respectively. A high estimation capability (R² = 0.964) has been achieved using ANFIS Model.

Keywords

Glass fiber reinforced polyester ANNs ANFIS adhesive wear composite material

Get full access to this article

View all access options for this article.

References

Patnaik

Satapathy

Mahapatra

, et al. Modeling and prediction of erosion response of glass reinforced polyester-flyash composites. J Reinf Plast Compos 2009; 28(5): 513–536.

Pani

Chandrasekhar

Singh

. Application of box-behnken design and neural computation for tribo-mechanical performance analysis of iron-mud-filled glass-fiber/epoxy composite and parametric optimization using PSO. Polym Compos 2019; 40(4): 1433–1449.

Capitanu

Vladareanu

, et al. A neural network approach to the steel surface wear on linear dry contact, plastic material reinforced with SGF/steel. J Trib 2019; 22: 74–107.

Kumar

Rajmohan

. Optimizing wear behavior of epoxy composites using response surface methodology and artificial neural networks. Polym Compos 2019; 40(7): 2812–2818.

Bongale

Kumar

SVC

Sachit

, et al. Wear rate optimization of Al/SiCnp/e-glass fibre hybrid metal matrix composites using taguchi method and genetic algorithm and development of wear model using artificial neural networks. Mater Res Exp 2018; 5(3): 1–13.

Pati

Satapathy

. Prediction and simulation of wear response of linz–donawitz (LD) slag filled glass–epoxy composites using neural computation. Polym Adv Technol 2015; 26: 121–127.

Padhi

Satapathy

. Solid particle erosion behavior of BFS-filled epoxy–SGF composites using taguchi’s experimental design and ANN. Tribol T 2014; 57(3): 396–407.

Padhi

Satapathy

. Analysis of sliding wear characteristics of BFS filled composites using an experimental design approach integrated with ANN. Tribol T 2013; 56(5): 789–796.

Yang

Tzeng

. Optimization of mechanical characteristics of short glass fiber and polytetrafluoroethylene reinforced polycarbonate composites using the neural network approach. Expert Syst Appl 2012; 39: 3783–3792.

10.

Parikh

Gohil

. Experimental investigation and prediction of wear behavior of cotton fiber polyester composites. Friction 2017; 5(2): 183–193.

11.

Singh

Hussain

. Wear peculiarity of TiO₂ filled polyester-based homogeneous composites and their functionally graded materials using taguchi methodology and ANN. Mater Today: Proc 2015; 2(4–5): 2718–2727.

12.

Kranthi

Satapathy

. Evaluation and prediction of wear response of pine wood dust filled epoxy composites using neural computation. Comput Mater Sci 2010; 49: 609–614.

13.

Nirmal

. Prediction of friction coefficient of treated betelnut fibre reinforced polyester (T-BFRP) composite using artificial neural networks. Tribol Int 2010; 43: 1417–1429.

14.

Rao

Varadarajan

Rajendra

. Artificial neural network approach for the prediction of abrasive wear behavior of carbon fabric reinforced epoxy composite. Indian J Eng Mater Sci 2014; 21: 16–22.

15.

Kumar

Manisekar

Narayanasamy

. Experimental and prediction of abrasive wear behavior of sintered Cu-SiC composites containing graphite by using artificial neural networks. Tribol Trans 2014; 57(3): 455–471.

16.

Dambatta

Sayuti

Sarhan

AAD

, et al. Tribological performance of SiO₂-based nanofluids in minimum quantity lubrication grinding of Si₃N₄ ceramic. J Manuf Proc 2019; 41: 135–147.

17.

Nguyen

Prasad

Walker

, et al. A first course in fuzzy and neural control. Chapman & Hall/CRC, 2003.

18.

Jagtap

Pillai

. Comparison of extreme-ANFIS and ANFIS networks for regression problems. In: IEEE International Advance Computing Conference (IACC), Gurgaon, India, 21-22 February 2014, pp. 1190–1194.

19.

Lin

. Neural fuzzy systems: a neuro-fuzzy synergism to intelligent systems. Prentice Hall PTR; 1996.

20.

Zalnezhad

Sarhan

Hamdi

. A fuzzy logic based model to predict surface hardness of thin film TiN coating on aerospace AL7075-T6 alloy. Int J Adv Manuf Technol 2013; 68(1-4): 415–423.

21.

Asiltürk

Tinkir

Monuayri

, et al. An intelligent system approach for surface roughness and vibrations prediction in cylindrical grinding. Int J Comput Integr Manuf 2012; 25(8): 750–759.

22.

Dere

Filiz

İH

. Experimental investigation of the effects of workpiece diameter and overhang length on the surface roughness in turning of free machining steel and modelling of surface roughness by using ANFIS. J Fac Eng Archit Gaz 2019; 34(2): 675–686.

23.

Vladareanu

Capitanu

Vladareanu

. Neuro-Fuzzy modelling of the metallic surface characterization on linear dry contact between plastic material reinforced with SGF and alloyed steel. Materials 2018; 11(7): 1181–1202.

24.

Al-Saeedi

Sarhan

AAD

Bushroa

. Investigating the tribological characteristics of burnished polyoxymethylene-ANFIS and FE modeling. Tribol Trans 2018; 61(5): 880–888.

25.

Alambeigi

Khadem

Khorsand

, et al. A comparison of performance of artificial intelligence methods in prediction of dry sliding wear behavior. Int J Adv Manuf Technol 2016; 84: 1981–1994.

26.

CCM

Hsieh

Kuan

, et al. Effects of molecular weight and molecular structure of low profile additives on the properties of bulk molding compound (BMC). Polym Eng Sci 2003; 43(5): 989–998.

27.

Suresha

Chandramohan

Mohanram

. Role of fillers on three-body abrasive wear behavior of glass fabric reinforced epoxy composites. Polym Compos 2009; 30(8): 1106–1113.

28.

Sawyer

Freudenberg

Bhimaraj

, et al. A study on the friction and wear behavior of PTFE filled with alumina nanoparticles. Wear 2003; 254(5–6): 573–580.

29.

Mimaroglu

Sen

Unal

. Abrasive wear volume maps for PA6 and PA6 composites under dry working condition. Appl Compos Mater 2008; 15: 13–25.

30.

Shibata

Yamaguchi

Hokkirigawa

. Tribological behavior of polyamide 66/rice bran ceramics and polyamide 66/glass bead composites. Wear 2014; 317(1–2): 1–7.

31.

Navarro

Moreno

Arizmendi-Morquecho

, et al. Preparation and tribological properties of chitosan/hydroxyapatite composite coatings applied on ultra high molecular weight polyethylene substrate. J Plast Film Sheeting 2012; 28(4): 279–297.

32.

Aguilera-Camacho

Hemandez-Navarro

Moreno

, et al. Improvement effects of Cao nanoparticles on tribological and microhardness properties of PMMA coating. J Coat Technol Res 2015; 12(2): 347–355.

33.

Shamshirband

Malvandi

Karimipour

, et al. Performance investigation of micro- and nano-sized particle erosion in a 90° elbow using an ANFIS model. Powder Technol 2015; 284: 336–343.

34.

Walia

Singh

Sharma

. ANFIS: adaptive neuro-fuzzy inference system—a survey. Int J Comput Appl 2015; 123(13): 32–38.

35.

Mesbahi

Semnani

Khorasani

. Performance prediction of a specific wear rate in epoxy nanocomposites with various composition content of polytetrafluoroethylene (PTFE), graphite, short carbon fibers (CF) and nano-TiO₂ using adaptive neuro-fuzzy inference system (ANFIS). Compos B 2012; 43: 549–558.

36.

Takagi

Sugeno

. Fuzzy identification of systems and its applications to modelling and control. IEEE Trans Sys Man Cybern 1985; 15: 116–132.

37.

Ross

. Fuzzy logic with engineering applications. New York: McGraw Hill, 1995.

38.

Kosko

. Neural networks and fuzzy systems, a dynamical systems approach to machine intelligence. Hoboken, NJ: Prentice Hall Intern Edit, 1992.

Supplementary Material

Please find the following supplemental material available below.

For Open Access articles published under a Creative Commons License, all supplemental material carries the same license as the article it is associated with.

For non-Open Access articles published, all supplemental material carries a non-exclusive license, and permission requests for re-use of supplemental material or any part of supplemental material shall be sent directly to the copyright owner as specified in the copyright notice associated with the article.

0.00 MB

0.04 MB

0.16 MB

0.07 MB