The blends of fluororubber (FKM) and silicone rubber (MVQ) were prepared by the incorporation of fumed silica using vinyl thiethoxy silane (VTEO) grafted onto FKM (FKM-g-VTEO) as a compatibilizer. The effect of the compatibilizer loading on the curing characteristics, mechanical properties, heat aging properties and oil resistance was investigated. Dynamic mechanical analysis indicates that FKM-g-VTEO acts as a compatibilizer in the FKM/MVQ blends. The tensile properties and oil resistance of FKM/MVQ blends increase with the increasing loading of FKM-g-VTEO up to 9 phr and the heat aging properties increase with the addition of the compatibilizer up to 6 phr. The fracture surfaces of tensile samples were observed by scanning electron microscopy (SEM). SEM of the tensile fracture surface of the blends and rubber–filler interaction studies shows that the presence of FKM-g-VTEO enhances the interfacial interaction of fumed silica and rubber matrix.
HabeebRKUnnikrishnanGSujithA. Cure characteristics and mechanical properties of styrene-butadiene rubber/acrylonitrile butadiene rubber. Mater Lett2005; 59: 633–639.
2.
ZaharescuTMeltzerVPincuEJipaS. Thermal study on binary blends of ethylene-propylene elastomers and acrylonitrile-butadiene rubber. Polym Bull2007; 58: 683–689.
3.
WangYBHuangZXZhangLMMeiQL. Mechanical and thermal properties of polysiloxanes and NBR blend elastomer. J Wuhan Uni Tech Mater Sci Edn2006; 21: 92–94.
ChenCMXiongCXYangJDongLJ. Microstructure and properties of fluoroelastomer/butadiene-acrylonitrile rubber interpenetrating polymer networks. J Wuhan Uni Tech Mater Sci Edn2008; 23: 50–53.
6.
OgunniyiDS. Fluoroelastomer heat, fluid resistance. A comparison of crosslinking agents. Elastomerics1990; 122: 22–25.
GhoshAKumarBBhattacharyaAKDeSK. Effects of blend ratio and vulcanizate powders on the processability of silicone rubber/fluororubber blends. J Appl Polym Sci2003; 88: 2377–2387.
9.
GhoshANaskarAKKhastgirDDeSK. Dielectric properties of blends of silicone rubber and tetraflouroethylene/propylene/vinylidene fluoride terpolymer. Polymer2001; 42: 9849–9853.
10.
GhoshADeSK. Dependence of physical properties and processing behavior of blends of silicone rubber and fluororubber on blend morphology. Rubb Chem Tech2004; 77: 856–872.
11.
FaytRJeromeRTeyssieP. Molecular design of multicomponent polymer systems -3. Comparative behavior of pure and tapered block copolymers in emulsification of blends of low-density polyethylene and polystyrene. J Polym Sci Polym Phys Edn1982; 20: 2209–2217.
12.
FaytRHadjiandreouPTeyssieP. Molecular design of multicomponent polymer systems: VII. Emulsifying effect of poly (Ethylene-b-Styrene) copolymer in high-density polyethylene/polystyrene blends. J Polym Sci Polym Chem Edn1985; 23: 337–342.
JosephAGeorgeKE. Studies on polystyrene/linear low density polyethylene blends. Kauts Gummi Kunst1991; 44: 538–541.
15.
PticekAHrnjak-MurgicZJelencicJ. Effect of compatibilizer on morphology and mechanical properties of SAN/EPDM blends. Inter Polym Proc2008; 23: 356–362.
16.
NakasonCJarnthongMKaesamanAKiatkamjornwongS. Thermoplastic elastomers based on epoxidized natural rubber and high-density polyethylene blends: effect of blend compatibilizers on the mechanical and morphological properties. J Appl Polym Sci2008; 109: 2694–2702.
17.
PichaiyutSNakasonCKaesamanAKiatkamjornwongS. Influences of blend compatibilizers on dynamic, mechanical, and morphological properties of dynamically cured maleated natural rubber and high-density polyethylene blends. Polym Test2008; 27: 566–580.
18.
ShabbirSZulfiqarSLieberwirthIKausarASarwarMI. Compatibilizing effect of functionalized polystyrene blends: a study of morphology, thermal, and mechanical properties. Surf Int Anal2008; 40: 906–913.
19.
KomalanCGeorgeKEJacobS. Reactive compatibilization of nylon copolymer/EPDM blends: experimental aspects and their comparison with theory. Polym Adv Tech2008; 19: 351–360.
20.
FaytRJeromeRTeyssiePh. Molecular design of multicomponent polymer systems. XII. Direct observation of the location of a block copolymer in low-density polyethylene-polystyrene blends. J Polym Sci Polym Lett Edn1986; 24: 25–28.
21.
WootthikanokkhanJTongrubbaiB. Compatibilization efficacy of poly(isoprene-butyl acrylate) block copolymers in natural/acrylic rubber blends. J Appl Polym Sci2003; 88: 921–927.
22.
RamesanMTAlexR. Compatibilization of SBR/NBR blends using chemically modified styrene-co-butadiene rubber part 2. Effect of compatibilizer loading. Polym Int2001; 50: 1298–1308.
23.
RamesanMTKuriakoseBPradeepP. Compatibilization of SBR/NBR blends using chemically modified styrene butadiene rubber. Part I: effect of chlorine content of compatibilizer. Int Polym Pro2001; 16: 183.
24.
IsmailHHairunezamHM. The effect of a compatibilizer on curing characteristics, mechanical properties and oil resistance of styrene butadiene rubber/epoxidied natural rubbers blends. Eur Polym J2001; 37: 39.
25.
KaderMAKimWDKaangSNahC. Morphology and dynamic mechanical properties of natural rubber/nitrile rubber blends containing trans-polyoctylene rubber as a compatibilizer. Polym Int2005; 54: 120–129.
26.
ZhuSHChanCMZhangYX. Poly(vinyl chloride)/styrene-butadiene rubber blends prepared by dynamic vulcanization with nitrile rubber as the compatibilizer. J Appl Polym Sci1995; 58: 621–631.
27.
PandeyKNDebnathKKRajagopalanPTSetuaDKMathurGN. Thermal analysis on influence of compatibilizing agents: effect of vulcanization of incompatible elastomer blend. J Therm Anal1997; 49: 281–292.
28.
KoleSSantraRBhowmickAK. Studies of in-situ compatibilized blend of silicone and EPDM rubbers. Rubb Chem Tech1994; 67: 119–128.
29.
KoleSChakiTKBhowmickAKTripathyDK. Effect of compatibiliser, curing sequence and ageing on the thermal stability of silicone rubber, EPDM rubber and their blends. Polym Degrad Stab1993; 41: 109–116.
30.
GuoJHZengXRLuoQK. Compatibilizing effect of fluororubber grafted by γ-Methacryloxypropyltrimethoxysliane in fluororubber/silicone rubber blends. J Elastom Plast2009; 41: 555–574.
31.
LorenzOParksCR. The crosslinking efficiency of some vulcanizing agents in natural rubber. J Polym Sci1961; 50: 299–312.
MooneyM. A theory of large elastic deformation. J Appl Phys1940; 11: 582.
34.
MarkJE. Constants 2C1 and 2C2 in phenomenological elasticity theory and their dependence on experimental variables. Rubb Chem Technol1975; 48: 495–512.
35.
SombatsompopNChristodoulouKJ. Penetration of aromatic hydrocarbons into natural rubber. Polym Polym Compos1997; 5: 377.
36.
EllisBWeldingGN. Techniques of Polymer Sciences. London: Society for Chemical Industry, 1964.
