Reclaimed rubber powder (RRP) was treated by the addition of glycidyl methacrylate (GMA) to impart desired properties suitable for oil resistance applications. The produced GMA-RRP was mixed with nitrile–butadiene rubber (NBR) in various compositions. The blends were irradiated with gamma radiation doses of 50–250 kGy. The compounding of the blend factors has been elaborated using Fourier transform infra-red spectroscopy and scanning electron microscopy (SEM). Different properties of the synthesized unirradiated and irradiated blends such as tensile strength, elongation at break, hardness, swelling behavior in motor and brake oils and thermal stability were investigated with respect to the RRP content. Results show that the tensile strength, hardness and swelling resistance increase with increasing NBR content in the blend. It has been shown that the tensile strength increased with dose. Similarly, hardness values, reported for the same composition, apparently increased with dose within the range of 50–250 kGy. The residual mass percentage of blends obviously increased upon the incorporation of incremental RRP. The swelling percentage steadily decreases with increasing radiation dose due to the radiation-induced cross-linking.
AhmedFSShafyMAbd El-megeedAAHegaziEM. The effect of Y-irradiation on Acrylonitrile-butadiene rubber NBR seal materials with different antioxidants. Mater Design2012; 36: 823–828.
2.
YasinTAhmedSAhmedMYoshiiF. Effect of concentration of polyfunctional monomers on physical properties of acrylonitrile-butadiene rubber under electron-beam irradiation. Radiat Phys Chem2005; 73(3): 155–158.
3.
ClavreulRPellegrinL. Lifespan prediction of EPR seals under gamma radiation. J Polym Test2001; 20(7): 769–770.
4.
El-NemrFK. Effect of different curing systems on the mechanical and physico-chemical properties of acrylonitrile butadiene rubber vulcanizates. Mater Design2011;32(6): 3361–3369.
5.
SreejaTD and Kutty SKN. Cure Characteristics and Mechanical Properties of Short Nylon Fiber Reinforced Natural Rubber-Reclaimed Rubber Blends. Polym Plast Technol Eng2003; 42(2): 236–252.
6.
ZhangSLXinZXZhangZXKimJK. Characterization of the properties of thermoplastic elastomers containing waste rubber tire powder. Waste Manage2009; 29(5): 1480–1485.
7.
KaraagacBSenMDenizVGuvenO. Recycling of gamma irradiated inner tubes in butyl based rubber compounds. Nucl Instrum Methods Phys Res B2007; 265(1): 290–293.
8.
SreejaTD and Kutty SKN. Cure characteristics and mechanical properties of natural rubber/reclaimed rubber blends. Polym Plast Technol Eng2000; 39(3): 501–512.
9.
MathewG, Singh RP, Groeninckx G and Thomas S. A Study of the utilization of reclaimed natural rubber prophylactic in blend with epoxidized natural rubber and silica. Prog Rubber Plast Recycl Technol2003; 19(4): 205–230.
10.
SombatsompopN and Kumnuantip C. Rheology, cure characteristics, physical and mechanical properties of tire tread reclaimed rubber/natural rubber compounds. J Appl Polym Sci2003; 87(10): 1723–1731.
11.
SreejaTD and Kutty SKN. Effect of urethane based bonding agent on the cure characteristics and mechanical properties of natural rubber/whole tyre reclaim-short nylon fiber composite. Polym Plast Technol Eng2002; 4(1): 77–89.
12.
NelsonPA and Kutty SKN. Cure characteristics and mechanical properties of butadiene rubber/whole tyre reclaimed rubber blends. Prog Rubber Plast Recycl Technol2002; 18(2): 85–97.
13.
SreejaTD and Kutty SKN. Studies on Acrylonitrile Butadiene Rubber/Reclaimed Rubber Blends. J Elastom Plast2002; 34(2): 145–155.
NevatiaPBanerjeeTSDuttaBJhaANaskarAKBhowmickAK. Thermoplastic elastomers from reclaimed rubber and waste plastics. J Appl Polym Sci2002; 83(9): 2035–2042.
17.
TantayanonS and Juikham S. Enhanced toughening of poly(propylene) with reclaimed-tire rubber. J Appl Polym Sci2004; 91(1): 510–515.
18.
HassanMMMahmoudGAEl-NahasHHHegazyEA. Reinforced material from reclaimed rubber/natural rubber, using electron beam and thermal treatment. J Appl Polym Sci2007; 104(4): 2569.
19.
YehiaAAMullMAIsmailMNHefnyYAAbdel-BaryEM. Effect of chemically modified waste rubber powder as a filler in natural rubber vulcanizates. J Appl Polym Sci2004; 93(1): 30.
20.
ShuyanLJohannaLKalleH. Improvement of mechanical properties of rubber compounds using waste rubber/virgin rubber. Polym Eng Sci2005; 45(9): 1239.
21.
Rudhesh KumarCFuhrmannIKarger-KocsisJ. LDPE-based thermoplastic elastomers containing ground tire rubber with and without dynamic curing. Polym Degrad Stabil2002; 76: 137.
22.
ManshaieRKhorasaniSNVeshareSJAbadchiMR. Effect of electron beam irradiation on the properties of natural rubber (NR)/styrene–butadiene rubber (SBR) blend. Radiat Phys Chem2011; 80(1): 100–106.
23.
YasinTNhoYKhanSAhmadR. Effect of polyfunctional monomers on properties of radiation crosslinked EPDM/waste tire dust blend. Radiat Phys Chem2012; 81(4): 421–425.
24.
AliMAEl-NemrKFHassanMM. Waste newsprint fibers for reinforcement of radiation-cured styrene butadiene rubber-based composites—Part I: mechanical and physical properties. J Reinf Plast Compos2011; 30(8): 721–737.
25.
CoatesJ.Interpretation of infrared spectra. A practical approach. In: MayersRA (ed.) Encyclopedia of analytical chemistry. Chichester: John Wiley and Sons Ltd, 2000.
26.
HillDJTO’DonnellJHPereraMCSPomeryPJ. An investigation of radiation-induced structural changes in nitrile rubber. J Polym Sci A Polym Chem1996; 34(12): 2439.
VijayabaskarVTikkuVKBhowmickAK. Electron beam modification and crosslinking: Influence of nitrile and carboxyl contents and level of unsaturation on structure and properties of nitrile rubber. Radiat Phys Chem2006: 75(7): 779–792.
29.
PereraRAlbanoCGonzalezJSilvaPIchazoM. The effect of gamma radiation on the properties of polypropylene blends with styrene–butadiene–styrene copolymers. Polym Degrad Stabil2004; 85(2): 741–750.
30.
Abou ZiedHMAliZIAbdel MaksoudTMKhafagyRM. Structure-property behavior of polyethylene exposed to different types of radiation. J Appl Polym Sci2000; 75(2): 179–200.
DuinMDiklandH. A chemical modification approach for improving the oil resistance of ethylene propylene copolymers. Polym Degrad Stabil2007; 92: 2287–2293.
