The effect of sodium sulfate as filler on viscosity, tack, and adhesion properties of Standard Malaysian Rubber (SMR 10)-based pressure-sensitive adhesive were studied. Coumarone-indene resin and toluene were used as the tackifier and solvent respectively throughout the experiment. The results show that viscosity of adhesive increases with addition of sodium sulfate. For rolling ball tack test, the distance traveled by rolling ball decreases with increasing sodium sulfate concentration indicating the increase of tack value with sodium sulfate. The distance traveled by the rolling ball decreases with coating thickness of adhesive. For cross-hatch adhesion test, result shows that maximum adhesion occurs between 30 and 40 parts per hundred parts of rubber (phr) of sodium sulfate content, an observation which is attributed to the maximum of wettability of adhesive. The 60 μm of adhesive coating thickness shows good performance of adhesion property of SMR 10-based pressure-sensitive adhesive.
Dahlquist, C.A. ( 1969). Treatise on Adhesion and Adhesives, New York, Marcel Dekker, p. 244.
2.
Ewins, E.E.J., St. Clair, D.J., Erickson, J.R. and Korcz, W.H. ( 1989). The Handbook of Pressure-Sensitive Adhesive Technology , 2nd edn, New York, Van Nostrand Reinhold, p. 317.
3.
Benedek, I. and Heymans, L.J. ( 1997). Pressure-sensitive Adhesives Technology, New York, Marcel Dekker.
4.
Creton, C. ( 1997). Materials Science and Technology, Weinheim, VCH, Vol. 18, p. 708.
5.
Lanrock, A. ( 1985). Adhesive Technology Handbook, Park Ridge, NJ, Noyes Publishing.
Leong, Y.C., Lee, L.M.S. and Gan, S.N. ( 2003). The Viscoeslastic Properties of Natural Rubber Pressure-sensitive Adhesive Using Acrylic Resin as a Tackifier, J. Appl. Polym. Sci., 88: 2118-2123.
8.
Choi, S., Nah, C., Seung G.L. and Joo, C.H. ( 2003). Effect of Filler-Filler Interaction on Rheological Behaviour of Natural Rubber Compounds Filled with both Carbon Black and Silica , Polym. Int., 52: 23-28.
9.
Poh, B.T. and Chang, Y.Y. (2006). Viscosity and Peel Strength of SMR 10-based Pressure-Sensitive Adhesives, Polym-Plast Technol Eng., 45: 1251-1256.
10.
Poh, B.T. and Chee, C.L. (2007). Effect of Coumarone-Indene Resin on Adhesion Property of SMR 20-based Pressure-sensitive Adhesives, Int. J.Polym. Mater., 56: 247-255.
11.
Poh, B.T. and Kwo, H.K. (2007). Shear Strength of SMR-based Pressure-sensitive Adhesives, Polym.-Plast. Technol. Eng. , 46: 1021-1024.
12.
Poh, B.T. and Tan, B.K. (1991). Mooney Scorch Time of Epoxidized Natural Rubber, J. Appl. Polym. Sci., 42: 1407-1416.
13.
Poh, B.T. and Tang, W.L. (1995). Concentration Effect of Stearic Acid on Scorch Behavior of Epoxidized Natural Rubber, J. Appl. Polym. Sci., 55: 537-542.
Poh, B.T. , Chen, M.F. and Ding, B.S. (1996). Cure Characteristics of Unaccelerated Sulfur Vulcanization of Epoxidized Natural Rubber, J. Appl. Polym. Sci., 60: 1569-1574.
16.
Sadequl, A.M. , Ishiaku, U.S., Ismail, H. and Poh , B.T. (1998). The Effect of Accelerator/Sulphur Ratio on the Scorch Time of Epoxidized Natural Rubber, Eur. Polym. J., 34: 51-57.
17.
Poh, B.T. and Razai, M.J. (1999). Abrasion Property of Epoxidized Natural Rubber, Polym-Plast. Technol. Eng., 38: 341-350.
18.
Poh, B.T. and Khok, G.K. (2000). Tensile Property of Epoxidized Natural Rubber/Natural Rubber Blends, Polym-Plast. Technol. Eng., 39: 151-161.
19.
Poh, B.T. and Te, C.S. (2000). Cure Index and Activation Energy of Vulcanization of Natural Rubber and Epoxidized Natural Rubber Vulcanized in the Presence of Antioxidants, J. Appl. Polym. Sci., 77: 3234-3238.
20.
Ismail, H. and Poh, B.T. ( 2000). Cure and Tear Properties of ENR 25/SMR L and ENR 50/SMR L Blends, Eur. Polym. J., 36: 2403-2408.
21.
Poh, B.T. and Tan, E.K. (2001). Mooney Scorch Time and Cure Index of Epoxidized Natural Rubber in Presence of Sodium Carbonate , J. Appl. Polym. Sci., 82: 1352-1355.
22.
Poh, B.T. and Lim, A.L. (2008). Adhesion Properties of Pressure-sensitive Adhesives Prepared from SMR 10/ENR 25, SMR 10/ENR 50, and ENR 25/ ENR 50 Blends, J. Appl. Polym. Sci. , 109: 115-119.
23.
Poh, B.T. and Kwo, H.K. (2007). Peel and Shear Strength of Pressure-sensitive Adhesives Prepared from Epoxidized Natural Rubber, J. Appl. Polym. Sci., 105: 680-684.
24.
Poh, B.T. and Yong, A.T. (2009). Dependence of Peel Adhesion on Molecular Weight of Epoxidized Natural Rubber, J. Adhesion., 85: 435-446.
25.
Poh, B.T. and Yong, A.T. (2010). Effect of Molecular Weight of Epoxidized-Natural Rubber on Viscosity and Tack of Pressure-sensitive Adhesives, J. Appl. Polym. Sci., 115: 1120-1124.
26.
Poh, B.T. and Yong, A.T. (2009). Effect of Molecular Weight of Epoxidized-Natural Rubber on Shear Strength of Adhesives , J. Appl. Polym. Sci., 114: 3976-3979.
27.
Poh, B.T. and Chow, S.K. (2007). Effect of Zinc Oxide on the Viscosity, Tack, and Peel Strength of ENR 25-based Pressure-sensitive Adhesives, J. Appl. Polym. Sci., 106: 333-337.
28.
Poh, B.T. and Chew, C.E. (2009). Effect of Kaolin on Adhesion Property of Epoxidized Natural Rubber-based Pressure-sensitive Adhesive Using Gum Rosin as the Tackifier, J. Elastom. Plast. , 41: 447-456.
Poh, B.T. and Gan, C.F. (2010). Viscosity and Peel Strength of Magnesium Oxide-filled Adhesive Prepared from Epoxidized Natural Rubber (ENR 25), Polym-Plast. Technol. Eng., 49: 191-194.
31.
Skeist, I. (ed.) (1990). Handbook of Adhesives, 3rd edn, New York , Van Nostrand Reinhold, p. 179, 563, 565.
32.
Issam, A.M. , Poh, B.T., Abdul Khalil , H.P.S. and Lee , W.C. ( 2009). Adhesion Properties of Adhesive Prepared from Waste Polystyrene , J. Polym. Environ., 17: 165-169.
33.
Urban, D. and Takamura, K. ( 2002). Polymer Dispersion and their Industrial Applications , New York, Wiley-VCH.
