Recycling of rubber waste poses a challenging environmental, economical, and social problem. In the present study, we propose a new two-stage recycling process to reuse a rubber waste. First, the granulates of the waste were pulverized into small particles using a single screw extruder in the Solid State Shear Extrusion (SSSE) process. Then, the produced powder was compression molded in the absence of virgin rubber. The slabs prepared at various molding conditions were subjected to mechanical, chemical, and microscopic tests. It is found that the slabs have high extensibility with low-medium tensile strength. Compressive creep of the powder, self-adhesion of rubber molecules, and interchange reactions of polysulfidic crosslinks are proposed as the basis of particle bonding.
Get full access to this article
View all access options for this article.
References
1.
1. Rubber Manufacturers Association Report (2002). U.S. Scrap Tire Markets 2001, http://www.rma.org.
12. Nah, C. and Kaang, S. (1997). J. Polym. Eng., 17: 323-338 .
13.
13. Makarov, V.M. and Drozdovski, V.F. (1991). Reprocessing of Tyres and Rubber Wastes, Ellis Horwood, New York .
14.
14. Arastoopour, H. (1998). U.S. Patent No. 5,704,555.
15.
15. Bilgili, E., Arastoopour, H. and Bernstein, B. (1999). AIChE Symp. Ser., 95(321): 83-89 .
16.
16. Arastoopour, H., Schocke, D.A., Bernstein, B. and Bilgili, E. (1999). U.S. Patent No. 5,904,885.
17.
17. Bilgili, E., Arastoopour, H. and Bernstein, B. (2001). Powder Technol., 115: 265-276 .
18.
18. Bilgili, E., Bernstein, B. and Arastoopour, H. (2001). Int. J. Non-Linear Mech., 36: 887-900 .
19.
19. Bilgili, E., Arastoopour, H. and Bernstein, B. (2000). Rubber Chem. Technol., 73: 340-355 .
20.
20. Bilgili, E., Arastoopour, H. and Bernstein, B. (2001). Powder Technol., 115: 277-289 .
21.
21. Burgoyne, M.D., Leaker, G.R. and Krekic, Z. (1976). Rubber Chem. Technol., 49: 375-378 .
22.
22. Swor, R.A., Jensen, L.W. and Budzol, M. (1980). Rubber Chem. Technol., 53: 1215-1225 .
23.
23. Phadke, A.A., Bhattacharya, A.K., Chakraborty, S.K. and De, S.K. (1983). Rubber Chem. Technol., 56: 726-736 .
24.
24. Hilyard, N.C., Tong, S.G. and Harrison, K. (1983). Plast., Rubber Compos. Process. Appl., 3: 315-322 .
25.
25. Acetta, A. and Vergnaud, J.M. (1981). Rubber Chem. Technol., 54: 302-310 .
26.
26. Acetta, A. and Vergnaud, J.M. (1982). Rubber Chem. Technol., 55: 961-966 .
27.
27. Lalwani, S.S., Pursell, W.G. and Horner, C.J. (1989). U.S. Patent No. 4,851,500.
28.
28. Bilgili, E.A., Dybek, A., Arastoopour, H. and Bernstein, B. (2000). 158th ACS Rubber Div. Meet., Paper no. 87, Cincinnati, OH.
29.
29. Dybek, A.K. (2000). Effect of Rubber Particle Characteristics and Process Variables on the Mechanical Properties of Produced Items Using Compression Molding Techniques, M.S. Thesis, Illinois Institute of Technology, Chicago, IL.
30.
30. Bilgili, E.A. (2001). Experimental and Theoretical Analyses of Pulverization and Recycling of Vulcanized Rubber, Ph.D. Thesis, Illinois Institute of Technology, Chicago, IL.
