Appin Ass.
(1987). Moisture Source Strength: Measurements in Selected Canadian Cities.
2.
Babbitt, J.D.
(1939) The Diffusion of Water Through Various Building Materials, Can. J. Research, 17: 15-15.
3.
Baker Max
, (1971). NRCC Seminar on Walls, Windows and Roofs, DBR: NRC.
4.
B.E.S.T.
(1984). Field Trials of Test Procedures to Determine Internal Moisture Source Strength.
5.
BEG
(1991). The Ontario Wall Drying Project, Building Engineering Group, University of Waterloo.
6.
Bomberg, M.T.
and Kumaran, M.K. (1986). A Test Method to Determine Air Flow Resistance of Exterior Membranes and Sheathings, J. Thermal Insulation, 9: 224–235.
7.
Bomberg, M.T.
and Shirtliffe, C.J. (1994). A Conceptual System of Moisture Performance Analysis, ASTM Manual on Moisture in Buildings. MNL 18, pp. 453–462.
8.
Brandt, R.
(1990). Architectural Details for Insulated Buildings. Van Nostrand, Reinhold. p. 169-169.
9.
Burnett, E.F.P.
(1981). Moisture-Related Problems in Housing in Newfoundland.
10.
CHBA
(1989). Canadian Home Builders’ Association Builders’ Manual. R-2000 Project.
11.
Christensen, G.
, Brown, W.P. and Wilson, A.G. (1964). Thermal Performance of Idealized Double Windows, Unvented, ASHRAE 71st Annual Meeting. Cleveland, Ohio.
12.
CMHC
(1985). Construction Principles to Inhibit Moisture Accumulation in Walls of New Wood-Frame Housing in Atlantic Canada (Advisory Document).
13.
CMHC/CHBA
. (1988). TF onMoisture Problems in Atlantic Canada. Can. Home Builders Ass.
14.
CMHC
(1990). Ventilation and Airtightness of New Detached Canadian Housing, Research Div.
15.
CMHC
(1993). Field Investigation Survey of Airtightness, Air Movement, and Indoor Air Quality in High Rise Apartment Buildings, Summary Report for CMHC.
16.
CMHC
(1995). EASE Demonstration House APCHQ’s Advanced House.
17.
CMHC
(1997). Field Investigation of Indoor Environment and Energy Usage in Mid-Rise Residential Buildings.
18.
CWC
(2001). Engineering Guide for Wood Frame Construction.
19.
Desmarais, G.
and Bomberg, M. (2001). Design of the Wall–Window Interface: Performance Requirements and Water-Managed Stucco Examples, 8th Canadian B. Sci. Conference.
20.
Dickens, H.B.
and Hutcheon, N.B. (1965). Moisture Accumulation in Roof Spaces Under Extreme Winter Conditions. In: RILEM/CIB Symposium on Moisture Problems in Buildings, Vol. 1.
21.
Eyre, D.
(1981). Air-Vapour Barrier Manual.
22.
Forest, T.
(1990). Drying of Walls Prairie Region.
23.
Ganguli, U.
(1986). Wind and Air Pressures on the Building Envelope, an Air Barrier for the Building Envelope, NRC, Bldg. Sci. Insight. pp. 7–13.
24.
Garden, G.K.
(1965). Control of Air Leakage is Important. CBD 72, DBR: NRC.
25.
Glaser, H. (1958). Vereinfachte Berechnung der Dampfdiffusion Durch Geschitete Waende. (in German) Kaeltetechnik. No11 and 12.
26.
Greig, A.R.
(1922). Wall Insulation, U. of Saskatchewan. College of Engineering. Bul. No. 1.
27.
Handegord, G.O.
(1960). Vapour Barriers in Home Construction. CBD 9, DBR: NRC.
28.
Hechler, F.G.
, McLaughlin, E.R. and Queer, E.R. (1942). Simultaneous Heat and Vapour Transfer Characteristics of an Insulating Material, ASHVE Transactions, 48: 505-505.
29.
HRACIC
(1989). Design and Insallation Manual for Residential Mechanical Ventilation Systems (Heating, Refrigerating and Air Conditioning Institute of Canada).
30.
Hutcheon, N.B.
(1998). The Utility of Building Science, Reprint of the Lecture Delivered in 1971, J. Thermal Env. and Bldg. Sci., 22: 4–9.
31.
Hutcheon, N.B.
and Handegord, G.O. (1980). Evolution of the Insulated Wood-Frame Wall in Canada. In: Proceedings of the 8th CIB Congress, Oslo. Vol. 16, pp. 434–438.
32.
IBl
(1987). Prairie Moisture Problems: Crawl Space Investigations in Norway House. Manitoba (The IB1 Group).
33.
Joy, F.A.
, Queer, E.R. and Schreiner, R.E. (1948). Water Vapour Transfer through Building Materials: Bulletin No. 61, Pennsylvania State College, Engineering Experiment Station.
34.
Karagiozis, A.K.
and Kumaran, M.K. (1993). Computer Model Calculation of the Performance of Vapor Barriers in Canadian Residential Buildings, ASHRAE Transactions, 99(2): 991–1003.
35.
Kent, A.D.
, Handegord, G.O. and Robson, D.R. (1966). A Study of Humidity Variations in Canadian Houses, ASHRAE Transactions, 72, Part II: 11.1.1–11.1.8.
36.
Kumaran, M.K.
, Mitalas, G.P. and Bomberg, M.T. (1994). Fundamentals of Transport and Storage ofMoisture in Building Materials and Components, Moisture Control in Buildings, ASTM MNL 18, pp. 3–18.
37.
Kubal, M.
(1992). Waterproofing the Building Envelope, p. 276-276, McGraw Hill.
38.
Lstiburek, J.W. and Lischkoff, J.K. (1984). A New Approach to Affordable, Low Energy House Construction, Alberta Department of Housing.
39.
Lstiburek, J.W.
(1995). Two Case Studies with Failures in the Environmental Control of Buildings, J. Thermal Ins. Building Envelopes, 19: 149–172.
40.
Lstiburek, J.W. (1999). Toward an Understanding and Prediction of Air Flow in Buildings. PhD Thesis, U. of Toronto.
41.
Lux, M.E.
and Brown, W.C. (1986). Air Leakage Control, an Air Barrier for the Building Envelope. NRC, Bldg. Sci. Insight. pp. 13–19.
42.
Marshall
(1983). Moisture Induced Problems in NHA Housing: Parts 1, 2 and 3. Marshall, Macklin, Monaghan Ltd.
43.
MH.
(1991). Structural Requirements for Air Barriers and Testing of Air Barrier Construction Details, Morrison Hershfield Ltd.
44.
NRC
(1988). Testing Air Barrier Systems for Wood Frame Walls. IRC/NRC.
45.
NRC
(1990). Establishing the Protocol for Measuring Air Leakage and Air Flow Patterns in High-Rise Apartment Buildings (Institute for Research in Construction, NRC).
46.
NRC
(1993). Building Performance News. Issue No. 17.
47.
Oboe
(1987). Final Report on Drying of Walls (Oboe Engineering Ltd.).
48.
Ojanen T.
, Kohonen, R. and Kumaran, M.K. (1994). Fundamentals of Transport and Storage of Moisture in Building Mat. and Components, Moisture Control in Buildings, ASTM MNL 18. pp. 18–34.
49.
Ojanen, T.R.
and Kumaran, M.K. (1996). Effect of Exfiltration on Hygrothermal Behaviour of a Residential Wall Assembly, J. Thermal Envs. and Bldg. Envs., 19: 215–228.
50.
Orr, H.W.
(1974). Condensation in Electrically Heated Houses, 2nd International CIB/RILEM Symposium on Moisture Problems in Buildings.
51.
Ortech
(1990). The Development of Test Procedures and Methods to Evaluate Air Barrier Membrane for Masonry Walls.
52.
Perrault, J.C.
(1986). Air Barrier Systems: Construction Applications, An Air Barrier for the Building Envelope. NRC, Bldg. Sci. Insight. pp. 20–24.
53.
Plastecnics
(1985). Long-term Stability of Polyethylene Air/Vapour Barrier.
54.
Quirouette, R.L.
(1985). The Difference Between a Vapour Barrier and an Air Barrier. Building Practice Note 54. IRC: NRC.
55.
Quirouette, R.L.
(1986). The Air Barrier Defined, an Air Barrier for the Building Envelope. NRC, Bldg. Sci. Insight, pp. 1–7.
56.
Ritchie, T.
(1967). Canada Builds, University of Toronto Press.
57.
Rowley, F.B.
, Algren, A.B. and Lund, C.E. (1938). Condensation Within Walls, ASHVE Transactions, 44.
58.
Rowley, F.B.
, Algren, A.B. and Lund, C.E. (1938). Condensation and Moisture in Relation to Building Construction and Operation, ASHVE Transactions, 44.
59.
Rowley, F.B.
(1939). A Theory Covering the Transfer of Vapour through Materials, ASHVE Transactions, 45: 545-545.
60.
Sasaki, J.R.
and Wilson, A.G. (1962). Window Air Leakage. CBD 25, DBR: NRC.
61.
Sasaki, J.R.
and Wilson, A.G. (1965). Air Leakage for Residential Windows, ASHRAE Transactions., 71, Part 11: 81–88.
62.
Scanada
(1980). A Survey of Moisture Problems in New Housing.
63.
Scanada
(1981). A Survey of Moisture-Troubled Walls in Newfoundland Houses.
64.
Schumacher, C.
and Straube, J. (2001). Review of Monitoring Studies Involving Field Exposure, Canada Japan Expert Forum in Victoria, 29–31, October.
65.
Shaw, C.Y.
(1985). Air Leakage Tests on Polyethylene Membrane Installed in a Wood Frame Wall, Division of Building Research – National Research Council.
66.
Stricker, S.
(1975). Measurement of Airtightness of Houses. ASHRAE Transactions, 81(1), 148–167.
67.
Tamura, G.T.
and Wilson, A.G. (1963). Air Leakage and Pressure Measurements on Two Occupied Houses, ASHRAE J., 5(12): 65–73.
68.
Tamura, G.T.
and Wilson, A.G. (1966). Pressure Differences for a Nine-Storey Building. ASHRAE Transactions, 72, Part 1: 180–189.
69.
Tamura, G.T.
and Wilson, A.G. (1967). Building Pressures Caused by Chimney Action, and Pressure Differences Caused by Chimney Effect in Three High Buildings, ASHRAE Transactions, 73, Part II.
70.
Tamura, G.T.
, Kuester, G.H. and Handegord, G.O. (1974). Condensation Problems in Flat Wood-Frame Roofs. In: 2nd International CIB/RILEM Symposium on Moisture Problems in Buildings.
71.
Tamura, G.T.
(1975). Measurement of Air Leakage Characteristics of House Enclosures, ASHRAE Transactions, 81(1): 202–211.
72.
Teesdale, L.V.
(1943). Comparative Resistance to Vapour Transmission of Various Building Materials, ASHVE Transactions, 49: 24-24.
73.
Torpe, G.
and Graee, T. (1961). The Effects of Air Currents in Moisture Migration and Condensation in Wood-Frame Structures, Bygg, 9(l): 1–10. Available as NRCC TT-1478.
74.
Trow
(1989). Criteria for Air Leakage Characteristics of Building Envelopes – Final Report.
75.
Timusk, J.
(1992). Moisture Control in Wood Framed Wall Assemblies. 6th Conference on Building Science and Technology.
76.
Unies Ltd.
(1988). Flair Homes Project. Report No. 1. Description of Project Homes.
77.
White, J.
(1989). Moisture Transport in Walls: Canadian Experience. ASTM STP (1039). pp. 35–50.
78.
Wilson, A.G.
and Nowak, E. (1959). Condensation Between Panes of Double Windows. ASHRAE Transactions. 65: 551–570.
79.
Wilson, A.G.
, Solvason, K.R. and Nowak, E.S. (1959). Evaluation of Factory-Sealed Double-Glazed Window Units. ASTM, Special Technical Publication No. 251. pp. 3–16.
80.
Wilson, A.G.
and Solvason, K.R. (1962). Performance of Sealed Double-Glazing Units, Journal of the Canadian Ceramics Society, 3. See alsoCBD 46, DBR: NRC.
81.
Wilson, A.G.
(1960a). Influence of the House On Chimney Draft, ASHRAE J., 2(12): 63-63.
Wilson, A.G.
(1961). Air Leakage in Buildings. CBD 23, DBR: NRC.
84.
Wilson, A.G.
and Brown, W.P. (1964). Thermal Characteristics of Double Windows. CBD 58, DBR: NRC.
85.
Wilson, A.G.
and Garden, G.K. (1965). Moisture Accumulation in Walls Due to Air Leakage. In: RILEM/CIB Symposium on Moisture Problems in Buildings, Vol. 1. Helsinki.
86.
Wilson, A.G.
(1992). Moisture in Canadian Wood-Frame Housing Construction: Problem, Research and Practice from 1975 to 1991. Report to CMHC.
87.
Wolfe, S.
, Solvasonm, K.R. and Wilson, A.G. (1966). Convection Air-Flow Effects with Mineral Wool Insulation in Wood-Frame Walls. ASHRAE Transactions, 72, Part II: 111.3.1–111.3.8.
88.
Yuill, G.K.
(1990). Comparison of WALLDRY Predictions with Atlantic Canada Moisture Test Hut Data.
