Mechanistic Role of Yarn and Fabric Structure in Determining Tear Resistance of Woven Cloth

Abstract

The goal of this study is to acquire an understanding of the manner in which cotton yam properties (including structure) contribute to the tear resistance of woven fabrics as measured by the tongue tear test. Our approach to this overall goal is a three step process. First, we examined samples during and after failure to identify the important phenomena that contribute to tearing strength, termed the subcomponents of tear. Next, we designed tests to observe the isolated contributions of pull-in (of yams into the del zone), pull-ahead (of yams towards the untorn fabric), and yam tenacity. Finally, in Part II of this paper, we will describe a model based on a mechanical spring analogy that will allow us to predict load-displacement responses of woven fabrics being torn.

Get full access to this article

View all access options for this article.

References

American Society for Testing Materials , Standard Test Method for Tearing Strength of Woven Fabrics by the Tongue (Single Rip) Method (Constant-Rate-of-Extension Tensile Testing Machine), in " 1989 Annual Book of ASTM Standards," vol. 07.01, Philadelphia, PA, 1989, pp.344-346.

Greenwood, K. , and Vaughan, G.N. , The Position of the Cloth Fell in Power Looms, Part III: Experimental, J. Textile Inst. 47, T274-T286 ( 1956).

Hamkins, C.P. , and Backer, S. , On the Mechanisms of Tearing in Woven Fabrics , Textile Res. J. 50, 323-327 ( 1980).

Krook, C.M. , and Fox, K.R. , Study of the Tongue-Tear Test, Textile Res. J. 15, 389-396 ( 1945 ).

Peirce, F.T. , The Geometry of Cloth Structures, J. Textile Inst. 28, T45-T96 ( 1937).

Realff, M.L. , Mechanical Properties of Fabrics Woven from Yams Produced by Different Spinning Technologies, Doctoral thesis, MIT Department of Mechanical Engineering, p. 54, January 1992.

Scelzo, W.A. , Mechanistic Role of Yarn and Fabric Structure in Determining Tear Resistance of Woven Cloth, Master's thesis, MIT Department of Mechanical Engineering, pp. 36-41, June 1992 .

Sebastian, S.A.R.D. , Bailey, A.I. , Briscoe , B.J. , and Tabor, D. , Extensions, Displacements and Forces Associated with Pulling a Single Yarn from a Fabric, J. Phys. D Appl. Phys. 20, 130-139 (1987).

Seo, M.H. , Modelling of Tear Phenomena in Fabric, Research Memo, MIT Department of Mechanical Engineering, 1989.

10.

Taylor, H.M. , Tensile and Tearing Strength of Cotton Cloths, J. Textile Inst. 50, T161-T188 (1959).

11.

Teixeira, N.A. , Platt, M.M. , and Hamburger , W.J. , Mechanics of Elastic Performance of Textile Materials, Part XII: Relation of Certain Geometric Factors to the Tear Strength of Woven Fabrics, Textile Res. J. 25, 838-861 (1955).