Mechanical Properties of Fabrics Woven from Yarns Produced by Different Spinning Technologies: Yarn Failure as a Function of Gauge Length

Abstract

In a study of yam strength translation into woven fabric behavior, experiments were conducted to establish the effect of test gauge length on yarn properties. Yams produced on each of the three major spinning systems were tensile tested at varying gauge lengths. Yam strength data were fit to two-parameter Weibull distributions and corresponding shape and scale parameters were determined. Strength increased as gauge lengths decreased, a trend indicated by the weakest-link theory. At very short gauge lengths, however, the data deviated from prediction based on the weakest-link theory, thus suggesting a change in the yam failure mechanism, as one would expect when the gauge length approximates the staple length. More direct evidence of such a change is provided in SEM photomicrographs of tensile failures of long versus short gauge test specimens. Combined fiber slippage/pullout and breakage prevailed at longer gauges, whereas a greater extent of fiber breakage with less slippage occurred at shorter gauge lengths. The balance between fiber slippage and fiber breakage varied with yarn structure as produced on different spinning systems. Finally, tensile tests were con ducted on plain and twill weave fabrics woven from yams produced on the different spinning systems. The resultant fabric tenacities approximated corresponding yarn tenacities only for the shortest gauge lengths.

Get full access to this article

View all access options for this article.

References

Batra, S.K. , Tayebi, A. , and Backer, S. , The Normal Force Between Twisted Filaments, Part II: Experimental Verification , J. Textile Inst. 64, 363-373 (1973).

Breiman, L. , "Statistics: With a View Toward Applications," Houghton Mifllin Company, Boston, 1973.

Daniels, H.E. , The Statistical Theory of Bundles of Threads , Proc. R. Soc. London A1 83, 405-435 (1945).

Duckett, K.E. , Krowicki, R.S. , and Cheng, C.C. , Some Observations on Single-fiber and Flat Bundle Tests, and on the Application of Weak-link Theory to the Determination of True Zero-gauge Tensile-test Length of Single Cotton Fibers", Appl. Polym. Symp., no. 27, 359-368 (1975).

Fry, T.C. , "Probability and Its Engineering Uses," 2nd ed., D. Van Nostrand Company, Princton, 1965.

Hearle, J. W. S. , Mechanics of Yams and Nonwoven Fabrics, in "Textile Structural Composites," T.-W. Chou and F. K. Ko , Eds., Elsevier Science Publishers, B.V., Amsterdam, 1989.

Hearle, J.W.S. , Grosberg, P. , and Backer, S. , "Structural Mechanics of Fibers, Yams, and Fabrics," Wiley-Interscience , New York, 1969.

Hussain, G.F.S. , Nachane, R.P. , Kishna Iyer, K.R. , and Srinathan , B. , Weak-link Effect on Tensile Properties of Cotton Yams, Textile Res. J. 60, 69-77 (1990).

Lewis, E.E. , "Introduction to Reliability Engineering," John Wiley & Sons, Inc., New York, 1987, pp. 96-99.

10.

Lord, P.R. , and Radhakrishnaiah, P. , A Comparison of Various Woven Fabrics Containing Friction, Rotor, and Ring Spun Cotton Yam Fillings, Textile Res. J. 58, 354-362(1988).

11.

Peirce, F.T. , Tensile Theorems for Cotton Yams, v.— 'The Weakest Link', Theorems on the Strength of Long and Composite Specimens , J. Textile Inst. 17, T355-T368 ( 1926).

12.

Seo, M. , Realff, M.L. , Boyce, M.C. , Schwartz, P. , and Backer, S. , Mechanical Properties of Fabrics Woven from Yams Produced by Different Spinning Technologies: Yam Failure in Woven Fabric, Textile Res. J . (to be submitted).

13.

Shahpurwala, A.A. , and Schwartz , P. , Modeling Woven Fabric Tensile Strength Using Statistical Bundle Theory, Textile Res. J. 59, 26-32 (1989).

14.

Smith, R.L. , and McCartney, L.N. , Statistical Theory of the Strength of Fiber Bundles, J. Appl. Mech. 105, 601-608 (1983).

15.

Thoman, D.R. , and Bain, L.J. , Two Sample Tests in the Weibull Distribution , Technometrics 11(4), 805-815 ( 1969).