This paper describes a newly developed, relatively simple but effective technique of producing a novel pseudo-composite cotton-rich staple blend yarn with improved tensile properties. The spacing between cotton and polyester rovings drafted simultaneously on a ring-spinning frame affects yarn structure, resulting in significantly stronger yarns than those produced by drafting the same two rovings together. The new composite or combination yarns may be useful in developing relatively stronger cotton-rich materials suitable for a variety of finishes and end uses.
Get full access to this article
View all access options for this article.
References
1.
Am. Soc. of Testing Materials, Standard Test Method for Breaking Load (Strength) and Elongation of Yarn by the Single Strand Method, ASTM D2256–80, 1980.
2.
Am. Soc. of Testing Materials, Standard Test Method for Unevenness of Textile Strands Using Zellweger Uster Capacitance Testing Equipment, ASTM D1425–81, 1981.
3.
De BarrA. E.WalkerP. G., A Measure of Fiber Distribution in Blended Yarns and its Application to the Determination of the Degree of Mixing Achieved in Different Processes, J. Textile Inst. 48, T405-T414 (1957).
4.
DuckettK. E.GoswamiB. C.RameyH. H.Jr., Mechanical Properties of Cotton/Polyester Yarns, Textile Res. J. 49, 262–267 (1979).
5.
GuptaD. K.ShieklA. E., The Mechanics of Blended Yarns, Appl. Polym. Symp. 27, 295–315 (1975).
6.
HardyJ. I., A Practical Laboratory Method for Making Thin Cross Sections of Fibers, U.S. Department of Agriculture, circular 378, 1935.
7.
JohnsonN. A.YoungM. D., The Structure of Sirospun Yarns, in “Proc. 7th International Wool Textile Research Conference, Tokyo,” vol. II, Society of Fiber Science and Technology, 1985, pp. 386–395.
8.
KempA.OwenJ. D., The Strength and Behavior of Nylon/Cotton Blended Yarns Undergoing Strain, J. Textile Inst. 46, T684-T698 (1955).
LordP. R.MohamedM. H., Blended Open-End Yarns, A Collection of Papers on O. E. Spinning, North Carolina State University School of Textiles, Division of Continuing Education, Raleigh, N.C., paper no. 5, 1974.
11.
MonegoC. J.BackerS., Tensile Rupture of Blended Yarns, Textile Res. J. 38, 762–766 (1968).
12.
PlateD. E. A.EmmanuelA.LappageJ., An Alternative Approach to Two-Fold Weaving Yarn (series of papers), J. Textile Inst. 73 (3), 99–123 (1982); 74 (4), 204–212 (6), 320–381 (1983).
