Ultra-high strength polyethylene filaments taken from a single spool of yarn were examined for strain rate and gauge length effects. As noted in previous research, high strength polyethylene exhibits pronounced strain rate effects that may be seen in strength changes, stress-strain behavior, and and topography of the fracture zones. Unlike most polymeric fibers, ultra-high strength polyethylene seems to exhibit no gauge length effects over the range from 10 to 200 mm, holding the strain rate constant. This latter effect, if true in general, would be a substantial advantage for polyethylene fibers, because scaling effects would be minimized.
Get full access to this article
View all access options for this article.
References
1.
Cansfield, D.L.M. , Ward, I.M., Woods , D.W., Buckley, A., Pierce, J.M., and Wesley, J.L., TensileStrength of Ultra High Modulus Linear Polyethylene Filaments, Polym. Commun.24, 130 (1983).
2.
Cohen, A.C., Maximum Likelihood Estimation in the Weibull Distribution Based on Complete and Censored Samples, Technometrics7, 579 (1965).
3.
Coleman, B.D. , Statistics and TimeDependence of Mechanical Breakdown in Fibers, J. Appl. Phys.29, 968 ( 1958).
4.
Peirce, F.T.S. , TensileTests for Cotton Yarns V, "The Weakest Link" Theorems on the Strength of Long Composite Specimens, J. Textile Inst.17, T355 ( 1926).
5.
Phoenix, S.L., and Wu, E.M., Statistics for the Time-Dependent Failure of Kevlar 49/Epoxy Composites: Micromechanical Modeling and Data Interpretation, UCRL-53365, Lawrence Livermore National Laboratory, Livermore, CA, 1983.
6.
Product data sheet number 862, Hercules Incorporated, Wilmington, DE.
7.
Smook, J., Hamersma, W., and Pennings, A.J., TheFracture Process of Ultra-High Strength Polyethylene Fibres, J. Mater. Sci.19, 1359 (1984).
8.
Wagner, H.D. , Phoenix, S.L., and Schwartz , P., A Study of Statistical Variability in the Strength of Single Aramid Filaments, J. Composite Mater. 18, 312 (1984).
9.
Wagner, H.D. , Schwartz, P., and Phoenix, S.L., Lifetime Statistics for Single Kevlar 49 Filaments in Creep-Rupture, J. Mater. Sci. (in press).
10.
Weibull, W. , A Statistical Theory of the Strength of Materials , R. Swed. Acad. Energy Sci. N. 151 (1939).
