Sage Journals: Discover world-class research

Abstract

Batches in a combing plant were monitored to examine the relative influence of a number of greasy wool characteristics on the early stages of worsted processing. Characteristics measured for each batch included those normally available from core testing (mean fiber diameter, yield, and vegetable matter content), together with staple length and its variability, staple strength and the position of staple weakness, clean color, resistance to bulk compression of clean wool, and variability of fiber diameter. Combing noilage, the mean and distribution of fiber length, and the mean fiber diameter of the resultant tops were the processing factors considered. High levels of association were found between selected subsets of the characteristics of the greasy wool and the processing factors. There is some discussion of the appropriateness of the methods of regression analysis and the refevance of the work to the commercial situation.

Get full access to this article

View all access options for this article.

References

Andrews, M.W. , and Rottenbury, R.A. , Prediction of the Fiber Length of Wool Tops, J. Textile Inst. 66, 200-202 (1975).

Andrews, M.W. , and Rottenbury, R.A. , The Impact of New Measurement Techniques on Raw Wool Preparation and Marketing, in "Proc. Metlan Conf.," Gdynia Wool Federation, Report No. 3, 1977.

Andrews, M.W. , Processing Studies, in "Proc. Seminar-Staple Length and Staple Strength of Greasy Wool," CSIRO, Division of Textile Physics, Ryde, Australia, Paper 5, 1979, pp. 93-109.

Australian Wool Corporation Advisory Committee on Objective Measurement, Pilot Industry Trials into Sale with Additional Measurement 1980/81, Wool Technol. Sheep Breed., 28, No. 3, 5-11 (1980).

Bow, M.R. , Staple Length, in "Proc. Seminar-Staple Length and Staple Strength of Greasy Wool," CSIRO, Division of Textile Physics, Ryde, Australia, Paper 1, 1979, pp. 17-38.

Charlton, D. , Rottenbury, R.A. , and Eley, J.R. , The Effect of Vegetable Matter Level on Worsted Processing, J. Textile Inst. 72, 96-99 (1981).

Clark, M.J. , and Whiteley, K.J. , Some Aspects of the Measurement of Colour in Raw Wool, J. Textile Inst. 69, 121-130 (1978).

Heuer, P.A. , Staple Strength Measurement Equipment, in "Proc. Seminar-Staple Length and Staple Strength of Greasy Wool," CSIRO, Division of Textile Physics, Australia, Paper 3, 1979 , pp. 63-77.

Lynch, L.J. , and Michie, N.A. , An Instrument for the Rapid Automatic Measurement of Fiber Fineness Distribution, Textile Res. J. 46, 653-660 (1976).

10.

Mackay, B.H. , Developments in Raw Wool Specification, in "Proc. 6th Int. Wool Text. Res. Conf," 1, 1980, pp 59-91.

11.

Miller, A. , Selecting Subsets of Regression Variables, in "Proc. Symposium-Regression Analysis," Stat. Soc. of Aust. (N.S.W.), Australia, Paper 1, 1979.

12.

Rottenbury, R.A. ;, and Smith, L.J. , The Processing Consequences of Classing Fleeces for Staple Strength, in "Proc. IWTO Tech. Comm. Meeting," London, Report 5, 1979 .

13.

Rottenbury, R.A. , and Andrews, M.W. , The Influence of Clip Preparation Prooedures on the Processing Performance of Australian Wools, in " Proc. 6th Int. Wool Text. Res. Conf," 3, 217-230 (1980).

14.

Rottenbury, R.A. , Andrews, M.A. , and Brown, G.H. , The Association Between Worsted Processing Performance and Raw Wool Characteristics, in " Proc. IWTO Tech. Comm. Meeting," Christchurch, Report 4, 1981.

15.

Turpie, D.W.F. , Recent Work in South Africa on the Effed of Raw Wool Blending on Subsequent Processing Performance, Wopl Technol. Sheep Breed. 25, No. 1, 1977, pp. 33-40.

16.

Turpie, D.W.F. , and Gee, E. , The Properties and Performance During Topmaking and Spinning of a Wide Range of South African Wools, in " Proc. 6th Int. Wool Text. Res. Conf," 3, 293-311 (1980).

17.

Wilkins, O.D. , Whiteley, K.J. , and Stanton, J.H. , Australian Superfine Wools-Fibre Diameter, Staple Crimp Frequency and Resistance to Compression Characteristics, in "Proc. IWTO Tech. Comm. Meeting," Christchurch, Report No. 6, 1981.

Association Between Raw Wool Characteristics and Processing to Top

Abstract

Get full access to this article

References