Thermal Performance Improvement of Window Drape Configurations

Abstract

Heat transfer through draped windows was studied to identify and test the insulative potential of drapery materials and configurations on a window in a test wall apparatus. Free flow of room air through the window-drape cavity was found to produce dramatic losses in the insulating properties of drapes. Variations of open-bag and wind-screen draping configurations made of conventional drape materials reduced window thermal transmittance values by 50%, a reduction equal to that expected from converting heat transfer from a free convective mode to a conductive mode at the window glass/room air interface. Materials with ideal properties for control of radiative and conductive heat flow were also used as draping elements to quantify the performance levels of the drapes configured to impede natural convection. Simulated drapery materials having radiation barriers configured to minimize air flow were as effective as double pane windows.

Get full access to this article

View all access options for this article.

References

American Society of Heating, Refrigerating and Air Conditioning Engineers, "Handbook of Fundamentals," ASHRAE, New York, 1977.

DeGraaf, J.G.A. and van der Held , E.F.M. , The Relation Between the Heat Transfer and the Convection Phenomena in Enclosed Plane Air Layers , Appl. Sci. Res. (Sec. A.) 3, 393-410 ( 1953).

Dix, Rollin C. and Lavan, Z. , "Window Shades and Energy Conservation," Mechanics, Mechanical and Aerospace Engineering Department Bulletin, Illinois Institute of Technology, Chicago, IL, December 1974.

Department of Energy, Division of Buildings and Community Systems, "Technology and Consumer Products Branch: Program Plan," DOE/ CS - 0047, September 1978.

Eccli, E. , Langdon, W.K. , and Wade A., The Specifics of Constructing Better Windows and Vents, in: " Low Cost Energy Efficient Shelter," Rodale Press, Inc., Emmaus, PA, 1976.

Hassenboehler, C. B., and Vigo, T. L., manuscript in progress.

Hastings, S.R. and Crenshaw, R.W. , "Window Design Strategies to Conserve Energy," National Bureau of Standards Building Science Series 104, Washington, D.C., 1977.

Insulating Shade Co., Inc., Branford, CT.

International Thermal Instrument Company, Delmar, CA.

10.

Kaswell, Ernest R. , "Textile Fibers, Yarns, and Fabrics," Reinhold Publishing Corp., New York, 1953, p. 221.

11.

Newburg, L. H. , ed., "Physiology of Heat Regulation and Science of Regulation and Science of Clothing," Hafner Publishing Co., New York, N.Y. 1948 , p. 412.

12.

Rasmussen, M., U. S. Pat. 4,019,554, April 26, 1977.

13.

Snell, J.F. , Achenbach, P.R. , and Peterson , S. R. Energy Conservation in New Housing Design, Science 192, 1305-1311 (1976).

14.

"The Energy Saving Guidebook," Technomic Publishing Co., Inc., Westport, CT, 1974.

15.

Window Quilt, Appropriate Technology, Brattleboro, VT.