The dyestuff fixation of cellulosic prints by normal steaming was optimized to find the best conditions. The dyestuffs used were Drimarene Blue, Red-R4BL, Yellow-R3GL, Cibacron Pront Blue 3R, Red G, and Yellow 4G. Factorial experiments were used to assess the effect of each treatment condition. The objective of this work was to find the best conditions that will require the least amount of imported materials, thereby reducing costs.
Get full access to this article
View all access options for this article.
References
1.
ClarkeW., “An Introduction To Textile Printing,”4th Edition, Newnes-Butterworths in association with I.C.I. organic division, London, 1974.
2.
DaviesO. L., Ed., “Design and Analysis of Industrial Experiments,”2nd Ed., Oliver and Boyd for I.C.I. Limited, London, 1967.
HarrisJ. A.ArthurJ. C.Jr., Single Dyebath Application of Direct, Acid, and Basic Dyes to Cotton—Poly-(Glycidyl Methacrylate) Fabrics, Textile Res. J. 46, 219–223 (1976).
5.
Heberlein Co. A. G., “Electrostatic Screen Printing of Textiles,” B.P. 1,025,033 (Switzerland) 13 May, 1963.
