The Horizontal Flame-Propagation Rate of Undyed Cotton Fabrics

Abstract

Differentiation of the flammabilities of nonflame-retardant, all-cotton fabrics cannot be accomplished by the usual test procedures, as these merely provide the means for determining when a fabric exceeds a certain set standard. The desired differentiation, however, can be obtained by measurement of the flame-propagation rate using the Ahiba Flammability Tester with the sample in the horizontal position.

Eight nonflame-retardant, undyed cotton fabrics of different constructions were studied. The weights of the fabrics fell into four groups: 3.1, 3.6–3.8, 4.1–4.4, and 7.5 oz/yd². Specimens were cut from the warp and filling directions of the fabrics; one set of specimens was oven-dried prior to testing, while another set was conditioned to equilibrium moisture content at 65% relative humidity and 70°F. Burning was different in the warp and filling directions. Differences in flame-propagation rates were found that were not weight dependent. In general, flame-propagation rate was not constant over the length of the specimen; in the warp direction the rates increased with distance from point of ignition, while in the filling direction constant and decreasing rates were also found. Flame-propagation rate was not effected to the extent expected by changing from oven drying to conditioning to equilibrium moisture content; only four of the eight fabrics showed significant changes. Burning in the filling directions of two fabrics was markedly changed; smaller differences were found in the warp direction only of a third fabric and in both the warp and filling directions of a fourth fabric.