Effective light management,stretchable and transparent nanofiber electrode via the incorporation of phosphors into composite nanofibers for wearable perovskite solar cells
Restricted accessResearch articleFirst published online July, 2023
Effective light management,stretchable and transparent nanofiber electrode via the incorporation of phosphors into composite nanofibers for wearable perovskite solar cells
The flexible transparent electrode is a crucial component of wearable photoelectric devices, and has a significant influence on the performance and development of wearable devices. Here, a phosphor/polyimide/polyurethane@silver composite nanofiber (NF) web electrode was fabricated by electrospinning and magnetron sputtering for wearable photoelectric devices. The electrode demonstrated a promising light management ability with converting ultraviolet light to visible light, high conductivity with sheet resistance of 22.1 Ω/square, and high transparency with transmittance of over 80%. Besides, the electrode possessed an excellent stretched capacity with tensile strain of over 100%, and tensile stability with the resistance increased by ∼75% after 500 stretching cycles at the tensile stain of 50%. As a result, a flexible perovskite solar cell (PSC) was assembled by using the NF web electrode, and possessed the power conversion efficiency of 3.47%, which is higher than that of PSCs based on electrodes without phosphor. Furthermore, the flexible PSCs exhibited promising mechanical stability under bending, and could serve as wearable devices. This work provides a feasible and promising method to prepare lightweight, stretchable, light management, and transparent electrodes for photoelectric devices, and may facilitate the development of wearable photoelectric devices.
LiXDZhangWXGuoXM, et al.
Constructing heterojunctions by surface sulfidation for efficient inverted perovskite solar cells. Science2022;
375: 434–437.
4.
HashemiSARamakrishnaSAberleAG.Recent progress in flexible–wearable solar cells for self-powered electronic devices. Energ Environ Sci2020;
13: 685–743.
5.
YangLXiongQLiY, et al.
Artemisinin-passivated mixed-cation perovskite films for durable flexible perovskite solar cells with over 21% efficiency. J Mater Chem A2021;
9: 1574–1582.
6.
HuXHuangZLiF, et al.
Nacre-inspired crystallization and elastic “brick-and-mortar’’ structure for a wearable perovskite solar module. Energ Environ Sci2019;
12: 979–987.
7.
JiCLiuDZhangC, et al.
Ultrathin-metal-film-based transparent electrodes with relative transmittance surpassing 100%. Nat Commun2020;
11: 3367.
8.
WuCKimTWGuoT, et al.
Wearable ultra-lightweight solar textiles based on transparent electronic fabrics. Nano Energ2017;
32: 367–373.
9.
YangYMinFQiaoY, et al.
Embossed transparent electrodes assembled by bubble templates for efficient flexible perovskite solar cells. Nano Energ2021;
89: 106384.
10.
GuoWXuZZhangF, et al.
Recent development of transparent conducting oxide-free flexible thin-film solar cells. Adv Funct Mater2016;
26: 8855–8884.
11.
YaoZQuDGuoY, et al.
Flexible, stable and indium-free perovskite solar cells using solution-processed transparent grapheme electrodes. J Mater Sci2019;
54: 11564–11573.
12.
YuLPShearerCShapterJ.Recent development of carbon nanotube transparent conductive films. Chem Rev2016;
116: 13413–13453.
13.
LuXZhangYZhengZ.Metal-based flexible transparent electrodes: challenges and recent advances. Adv Electron Mater2021;
7: 2001121.
14.
SepatNSharmaVSinghD, et al.
Nature-inspired bilayer metal mesh for transparent conducting electrode application. Mater Lett2018;
232: 95–98.
15.
KimJLeeJYouJ, et al.
Conductive polymers for next-generation energy storage systems: recent progress and new functions. Mater Horiz2016;
3: 517–535.
16.
WangYZhuCPfattnerR, et al.
A highly stretchable, transparent, and conductive polymer. Sci Adv2017;
3: e1602076.
17.
KumarSNehraMKediaD, et al.
Carbon nanotubes: a potential material for energy conversion and storage. Prog Energ Combust2018;
64: 219–253.
18.
TrungTQLeeNE.Materials and devices for transparent stretchable electronics. J Mater Chem C2017;
5: 2202–2222.
19.
GhoshDSChenTLMkhitaryanV, et al.
Solution processed metallic nanowire based transparent electrode capped with a multifunctional layer. Appl Phys Lett2013;
102: 221111.
20.
LipomiDJLeeJAVosgueritchianM, et al.
Electronic properties of transparent conductive films of PEDOT:PSS on stretchable substrates. Chem Mater2012;
24: 373−382.
21.
WangTLuKXuZ, et al.
Recent developments in flexible transparent electrode. Crystals2021;
11: 511.
22.
AltinYTasMBorazanİ, et al.
Solution-processed transparent conducting electrodes with graphene, silver nanowires and PEDOT:PSS as alternative to ITO. Surf Coat Tech2016;
302: 75–81.
23.
SoltanianSRahmanianRGholamkhassB, et al.
Highly stretchable, sparse, metallized nanofiber webs as thin, transferrable transparent conductors. Adv Energ Mater2013;
3: 1332–1337.
24.
SinghSBHuYKshetriT, et al.
An embedded-PVA@Ag nanofiber network for ultra-smooth, high performance transparent conducting electrodes. J Mater Chem C2017;
5: 4198–4205.
25.
LinSBaiXWangH, et al.
Roll-to-roll production of transparent silver-nanofiber-network electrodes for flexible electrochromic smart windows. Adv Mater2017;
29: 1703238.
26.
WangRMujahidMDuanY, et al.
A review of perovskites solar cell stability. Adv Funct Mater2019;
29:1808843.
27.
ClassenAHeumuellerTWabraI, et al.
Revealing hidden UV instabilities in organic solar cells by correlating device and material stability. Adv Energ Mater2019;
39: 1902124.
28.
Liu XChenTGongY, et al.
Light-conversion phosphor nanoarchitectonics for improved light harvesting in sensitized solar cells. J Photoch Photobio C2021;
47: 100404.
29.
HyunJYKimKHKimJP, et al.
Enhancement of luminescence efficiency of Y2O3 nanophosphor via core/shell structure. Nanomaterials2021;
11: 1563.
30.
Chen CLiHJinJJ, et al.
Long-lasting nanophosphors applied to UV-resistant and energy storage perovskite solar cells. Adv Energ Mater2017;
7: 1700758.
31.
LeeSHChoiJIKimYJ, et al.
Comparison of luminescent properties of Y2O3:Eu3+ and LaPO4:Ce3+, Tb3+ phosphors prepared by various synthetic methods. Mater Character2015;
103: 162–169.
32.
XuZHGaoYLiuT, et al.
General and facile method to fabricate uniform Y2O3:Ln3+(Ln3+ = Eu3+,Tb3+) hollow microspheres using polystyrene spheres as templates. J Mater Chem2012;
22: 21695–21703.
33.
LiangLSHuangZFCaiLH, et al.
Magnetron sputtered zinc oxide nanorods as thickness-insensitive cathode interlayer for perovskite planar-heterojunction solar cells. ACS Appl Mater Interface2014;
6: 20585−20589.
34.
ZhangPYChenWHYinX, et al.
High efficiency of 19% for stable perovskite solar cells fabrication under ambient environment using “conductive polymer adhesive”. J Power Source2021;
507: 230302.
35.
RadziukDVZhangWShchukinD, et al.
Ultrasonic alloying of preformed gold and silver nanoparticles. Small2010;
6: 545–553.
36.
Zhang ZWangXWangL, et al.
The position shifting of charge transfer band in Eu3+-doped Re2O3 phosphors. Chem Phys Lett2019;
731: 136611.
37.
GhoshSAbbasZDasariS, et al.
Luminescent Eu3+ and Tb3+ complexes of 4-aminophenyl terpyridine (ptpy): photophysical aspects, DNA and serum protein binding properties. J Lumin2017;
187: 46–52.
38.
KhanSHanJSLeeSY, et al.
Flame-synthesized Y2O3:Tb3+ nanocrystals as spectral converting materials. J Nanopart Res2018;
20: 241.
39.
NakamuraT.Enhancement of visible-luminescence saturation intensity by surface plasmons in Ag/ZnO films. Phys Rev Appl2016;
6: 044009.
40.
KorsunskaNBorkovskaLKhomenkovaL, et al.
Redistribution of Tb and Eu ions in ZnO films grown on different substrates under thermal annealing and its impact on Tb-Eu energy transfer. Appl Surf Sci2020;
528: 146913.
41.
BackMBoffelliMMassariA, et al.
Energy transfer between Tb3+ and Eu3+ in co-doped Y2O3 nanocrystals prepared by Pechini method. J Nanopart Res2013;
15: 1753.
42.
BoydCCCheacharoenRLeijtensT, et al.
Understanding degradation mechanisms and improving stability of perovskite photovoltaics. Chem Rev2019;
119: 3418–3451.
43.
JonSSinGKimG, et al.
Flexible perovskite solar cells based on AgNW/ATO composite transparent electrodes. Synth Met2020;
262: 116286.
44.
LiMZuoWWRicciardulliAG, et al.
Embedded nickel-mesh transparent electrodes for highly efficient and mechanically stable flexible perovskite photovoltaics: toward a portable mobile energy source. Adv Mater2020;
32: 2003422.
45.
JeonIChibaTDelacouC, et al.
Single-walled carbon nanotube film as electrode in indium-free planar heterojunction perovskite solar cells: investigation of electron-blocking layers and dopants. Nano Lett2015;
15: 6665−6671.
46.
Zhai JFYinXSongLX, et al.
Preparation of fabric-like transparent electrode for flexible perovskite solar cell. Thin Solid Film2021;
729: 138698.
47.
Roldan-Carmona GMalinkiewiczOSorianoA, et al.
Flexible high efficiency perovskite solar cells. Energ Environ Sci2014;
7, 994–997.
48.
JinYSunYWangK, et al.
Long-term stable silver nanowire transparent composite as bottom electrode for perovskite solar cells. Nano Res2018;
11: 1998–2011.
49.
Luo QMaHHouQ, et al.
All-carbon-electrode-based endurable flexible perovskite solar cells. Adv Funct Mater2018;
28: 1706777.
50.
GoetzSMehanniDBanasalN, et al.
Low-temperature-processed transparent electrodes based on compact and mesoporous titanium oxide layers for flexible perovskite solar cells. ACS Appl Energ Mater2022;
5: 5318–5330.
51.
JiangSFengLZhangW, et al.
Indium-free flexible perovskite solar cells with AZO/Cu/Ag/AZO multilayer transparent electrodes. Sol Energ Mat Sol C2022;
246: 111895.
Supplementary Material
Please find the following supplemental material available below.
For Open Access articles published under a Creative Commons License, all supplemental material carries the same license as the article it is associated with.
For non-Open Access articles published, all supplemental material carries a non-exclusive license, and permission requests for re-use of supplemental material or any part of supplemental material shall be sent directly to the copyright owner as specified in the copyright notice associated with the article.
