Abstract
A novel concept of producing false-twist yarns by cyclical stress fluctuation was developed. The forming principle was introduced to analyze the formation process of false twists on rotary threaded contact surfaces. Geometric analysis indicates that cyclical stress variations produce extra rotations (false twists) on fiber strands in the yarn formation area, causing twist redistribution and fiber arrangement remodeling with the appearance of local fiber reversion. Theoretical analysis reveals that more false twists are produced when the spun yarn is in contact with surfaces of high traverse speeds. Then, a motion simulation model using different traverse speeds of the threaded contact surface was established to compare the yarn internal stress variation, verifying the false-twist efficiency at different traverse speeds. Finally, a systematic comparison was conducted between the yarns spun at different traverse speeds. It was shown that the yarn properties improved with higher traverse speeds of the threaded contact surface, achieving less hairiness, high yarn strength, and low residual torque.
Keywords
Get full access to this article
View all access options for this article.
References
Supplementary Material
Please find the following supplemental material available below.
For Open Access articles published under a Creative Commons License, all supplemental material carries the same license as the article it is associated with.
For non-Open Access articles published, all supplemental material carries a non-exclusive license, and permission requests for re-use of supplemental material or any part of supplemental material shall be sent directly to the copyright owner as specified in the copyright notice associated with the article.
