Cotton-containing printing wires based on the two-dimensional braiding method for three-dimensional printing of clothing

Abstract

There is a large somatosensory gap between the three-dimensional (3D) printing of clothing and traditional garments due to the limitations (e.g., air permeability and skin-friendliness) of the printing materials. For this reason, the application of traditional textile materials in 3D printing has become a hot topic in the field of 3D printed clothing. Based on the above, this work prepared four kinds of cotton-containing composite solutions and then impregnated thermoplastic polyurethane core yarns in these solutions to obtain four types of 3D printed cotton-containing composite core yarns (3Dp-C-CYs). Afterward, based on the two-dimensional (2D) braiding method, four kinds of cotton-containing 3D printing wires used for fused deposition molding technology were prepared by wrapping low-melting polyester filaments around the different 3Dp-C-CYs. After comparing the printing performance of the four cotton-containing 3D printing wires, the wire containing cotton powders had the best comprehensive performance and was selected to print the cotton-containing 3D printed fabrics. The results showed that the cotton-containing 3D printed fabric has good flatness and contains a large number of cotton powders; in addition, compared with the traditional polylactic acid and acrylonitrile butadiene styrene copolymer 3D printed fabrics, the 3D printed fabric made up of cotton-containing 3D printing wire can provide a closer wearing experience to that of cotton fabric. The 3D printing wire produced by the 2D braiding method offers a new idea for applying traditional textile materials in 3D printing, showing great application potentials in the field of 3D printing of clothing.