Abstract
In this work, ultraviolet (UV) sensible metallocene isotactic polypropylene (miPP) filaments were produced with different drawing ratios and various concentrations of photochromic pigment. The effects of pigment concentration and drawing ratio on the chromatic properties and the structural modification for the miPP filaments were studied extensively by differential scanning calorimetry (DSC) and small- and wide-angle X-ray scattering (SAXS/WAXS) measurements. The change in melting temperature and the polymeric structures, such as lamellar thickness, long period and degree of crystallinity of miPP with the addition of a UV sensible pigment into miPP and the drawing process, were evaluated. The results show that the pigment concentration and the drawing ratio influence the inner structure of miPP filaments. Finally, our investigation shows that SAXS and also WAXS are appropriate to determine the lamellar thickness and the degree of crystallinity established by the DSC approach. This work attempts to correlate the results of lamellar thickness, the degree of crystallinity and the higher-order structure of the polymer acquired by DSC as well as X-ray diffraction (XRD) techniques in order to develop an appropriate approach to find the influence of pigment concentration and drawing ratio on miPP filaments.
Keywords
Get full access to this article
View all access options for this article.
References
Supplementary Material
Please find the following supplemental material available below.
For Open Access articles published under a Creative Commons License, all supplemental material carries the same license as the article it is associated with.
For non-Open Access articles published, all supplemental material carries a non-exclusive license, and permission requests for re-use of supplemental material or any part of supplemental material shall be sent directly to the copyright owner as specified in the copyright notice associated with the article.
