Color prediction model for hybrid multifilament fabric

Abstract

In order to facilitate the design of a hybrid filament before spinning, a k-m (Kubelka-Munk) iteration model was proposed, which was based on the calculation method for reflectance of a translucent object and needed to be used in conjunction with a fabric model that can reflect the arrangement order of monofilaments. Therefore, the model can not only calculate the color of each point on the fabric surface, but also the mixed color of the fabric. Twenty fabrics with five different blending ratios of black monofilaments and white monofilaments, four multifilament fineness and three fabric weave types were woven. The relationship between the gray distribution of all points on the fabric surface captured by the camera in a DigiEye colorimeter and calculated by the k-m iteration model was analyzed, and the color difference between the mixed color of the fabric tested by the Datacolor spectrophotometer and that calculated by the k-m iteration model was calculated. The results show that the intersection distance and Pearson correlation coefficient between the gray histogram of the photographed fabric image and that of the calculated fabric image were 0.79 and 0.89, respectively. The average color difference obtained by the k-m iteration model was 0.92 Color Measurement Committee (2:1) units, which was best compared with the calculation results of other models. By discussing the fabric structure parameters causing the lightness difference, it was concluded that the calculated lightness was smaller than the measured lightness difference for fabric with a longer float length, smaller multifilament fineness and a larger black monofilament blending ratio.