To improve the reliability and design of body armor, it is imperative to understand the failure modes and the degradation rates of the materials used in armor. Despite the best efforts of manufacturers, some vulnerability of armor materials to aging due to hydrolytic or oxidative environments is expected and may result in the degradation of material properties such as tensile strength. In this work, p-aramid yarns from two manufacturers were exposed to environmental conditions of various fixed temperature and humidity combinations. The maximum temperature and humidity condition was 70℃ and 76% relative humidity (RH). Tensile tests were performed on specimens extracted at several different times over the course of at least 1 year to determine the change in ultimate tensile strength and failure strain as a function of time, temperature, and humidity. Molecular spectroscopy was used to investigate any chemical changes as a result of the aging. The p-aramid materials were found to be generally resistant to degradation at most conditions, showing changes of less than 10% only at the highest temperature and humidity conditions.
ForsterALPintusPMessinG, et al.Hydrolytic stability of polybenzobisoxazole and polyterephthalamide body armor. Polym Degrad Stab2011; 96: 247–254.
2.
Chin J, Byrd E, Clerici C, et al. Chemical and physical characterization of poly(p-phenylene-2,6-benzobisoxazole) fibers used in body armor used in body armor: Temperature and humidity aging. NISTIR 7373, 2007.
3.
Forster AL, Rice KD, Riley MA, et al. Development of soft armor conditioning protocols for NIJ Standard–0101.06: Analytical results. NISTIR 7627, 2009.
4.
National Institute of Justice. NIJ Standard 0101.06 Ballistic Resistance of Body Armor, Washington, DC: U.S. Department of Justice, Office of Justice Programs, 2008.
5.
ForsterALForsterAMChinJW, et al.Long-term stability of UHMWPE fibers. Polym Degrad Stab2015; 114: 45–51.
6.
TompkinsD. Body armor safety initiative: To protect and serve better. NIJ J2006; 254: 1–5.
DuPont Kevlar Survivor’s Club: Rational Replacement Policy – A Recommendation to the Law Enforcement Community. Congress of the United States Office of Technology Assessment 1985; 294: 1302–1310.
9.
Frank D. Ballistic Tests of Used Soft Body Armor. NBSIR 86-3444, 1986.
10.
ArrietaCDavidÉDolezP, et al.Hydrolytic and photochemical aging studies of a Kevlar-PBI blend. Polym Degrad Stab2011; 96: 1411–1419.
11.
DerombiseGVouyovitch Van SchoorsLKlopEA, et al.Crystallite size evolution of aramid fibres aged in alkaline environments. J Mater Sci2012; 47: 2492–2500.
12.
AuerbachI. Kinetics for the tensile strength degradation of Nylon and Kevlar yarns. J Appl Polym Sci1989; 37: 2213–2227.
13.
DerombiseGVan SchoorsLVDaviesP. Degradation of aramid fibers under alkaline and neutral conditions: Relations between the chemical characteristics and mechanical properties. J Appl Polym Sci2010; 116: 2504–2514.
14.
MorganRJButlerNL. Hydrolytic degradation mechanism of Kevlar 49 fibers when dissolved in sulfuric acid. Polym Bull1992; 27: 689–696.
15.
Guangming C, Haihua Y and Weidong W. Evaluation of light and thermal aging performance of aramid fabric. In: Textile Bioengineering and Informatics Symposium Proceedings. 2008, pp. 321–325.
16.
ObaidAAYarlagaddaSGillespieJW. Combined effects of kink bands and hygrothermal conditioning on tensile strength of polyarylate liquid crystal co-polymer and aramid fibers. J Compos Mater2015, pp. 0021998315574754–0021998315574754.
17.
ObaidAADeitzelJMGillespieJW, et al.The effects of environmental conditioning on tensile properties of high performance aramid fibers at near-ambient temperatures. J Compos Mater2011; 45: 1217–1231.
18.
ZhangHZhangJChenJ, et al.Effects of solar UV irradiation on the tensile properties and structure of PPTA fiber. Polym Degrad Stab2006; 91: 2761–2767.
19.
BourbigotSFlambardXPoutchF. Study of the thermal degradation of high performance fibres - Application to polybenzazole and p-aramid fibres. Polym Degrad Stab2001; 74: 283–290.
20.
Abu ObaidADeitzelJMGillespieJW, et al.The effects of environmental conditioning on tensile properties of high performance aramid fibers at near-ambient temperatures. J Compos Mater2011; 45: 1217–1231.
21.
HindelehAMAbdoSM. Effects of annealing on the crystallinity and microparacrystallite size of Kevlar 49 fibres. Polymer (Guildf)1989; 30: 218–224.
22.
MartinJM. Quantitative characterization of spectral ultraviolet radiation-induced photodegradation in coating systems exposed in the laboratory and in the field. Prog Org Coatings1993; 23: 49–70.
23.
KampfGSommerKZirgieblE. Studies in accelerated weathering. Part I. Determination of the activation spectrum of photodegradation in polymers. Prog Org Coatings1991; 19: 69–69.
24.
SpringerHAbu ObaidAPrabawaAB, et al.Influence of hydrolytic and chemical treatment on the mechanical properties of aramid and copolyaramid fibers. Text Res J1998; 68: 588–594.
25.
HearleJWS. High Performance Fibers, Cambridge: Woodhead Publishing, 2001.
26.
McDonough WG, Holmes GA, Forster AL, et al. A graphical approach for assessing high-strength fiber performance. In: SAMPE 2010 Annual Technical Conference. 2010, p. 9.
27.
Cunniff PM. Dimensionless parameters for optimization of textile-based armor systems. In: 18th International Symposium on Ballistics. San Antonio, TX, 1999, pp. 1302–1310.
28.
ASTM E3110-18 Standard Test Method for Collection of Ballistic Limit Data for Ballistic-resistant Torso Body Armor and Shoot Packs.
29.
PhoenixSPorwalP. A new membrane model for the ballistic impact response and V50 performance for multi-ply fibrous systems. Int J Solids Struct2003; 40: 6723–6765.
30.
Engelbrecht-WiggansABurniFKrishnamurthyA, et al.Tensile testing of aged flexible unidirectional composite laminates for body armor. J Mater Sci2020; 55: 1035–1048.
31.
ASTM D2256-02 Standard Test Method for Tensile Properties of Yarn by the Single-Strand Method. ASTM International, 2002.
ForsterALRodriguez CardenasVKrishnamurthyA, et al.Disentangling high strength copolymer aramid fibers to enable the determination of their mechanical properties. J Vis Exp2018, pp. e58124–e58124.
34.
FukudaMOchiMMiyagawaM, et al.Moisture sorption mechanism of aromatic polyamide fibers: Stoichiometry of the water sorbed in poly(para-phenylene terephthalamide) fibers. Text Res J1991; 61: 668–680.
35.
MooneyDAMacElroyJMD. Differential water sorption studies on Kevlar 49 and as-polymerised poly (p-phenylene terephthalamide): Adsorption and desorption isotherms. Chem Eng Sci2004; 59: 2159–2170.
36.
SaijoKArimotoOHashimotoT, et al.Moisture sorption mechanism of aromatic polyamide fibres: Diffusion of moisture into regular Kevlar as observed by time-resolved small-angle X-ray scattering technique. Polymer (Guildf)1994; 35: 496–503.
37.
FukudaMKawaiH. Moisture sorption mechanism of aromatic polyamide fibers: Diffusion of moisture in poly(p-phenylene terephthalamide) fibers. Text Res J1993; 63: 185–193.
38.
FukudaMKawaiH. Moisture sorption mechanism of aromatic polyamide fibers. V: Growth of crystallites in as-spun wet poly (p-phenylene terephthalamide) fiber during dehydration. J Polym Sci Part B Polym Phys1997; 35: 1423–1432.
39.
MooneyDAMacElroyJMD. Differential water sorption studies on Kevlar 49 and as-polymerized poly (p-phenylene terephthalamide): Determination of water transport properties. Langmuir23–23.
40.
BalankinAS. A continuum framework for mechanics of fractal materials I: From fractional space to continuum with fractal metric. Eur Phys J B2015; 88: 90–90. Available at: https://doi.org/10.1140/epjb/e2015-60189-y.
41.
HeJ-HAinQ-T. New promises and future challenges of fractal calculus: From two-scale thermodynamics to fractal variational principle. Therm Sci2020, pp. 65–65.
42.
PorwalPPhoenixS. Modeling system effects in ballistic impact into multi-layered fibrous materials for soft body armor. Int J Fract2005; 135: 217–249.
43.
TiefenthalerAMUrbanMW. Surface studies of polymer films and fibers by CIRCLE ATR FT-IR. Appl Spectrosc1988; 42: 163–166.
44.
Forster AL. Study of acid generation from copolymer fibers based on 5-amino-2-(p-aminophenyl)-benzimidazole. NISTIR 7592, 2009.
45.
MorganRJPrunedaCO. The characterization of the chemical impurities in Kevlar 49 fibres. Polymer (Guildf)1987; 28: 340–346.
46.
ChatziETidrickSKoenigJ. Characterization of the surface hydrolysis of Kevlar-49 fibers by diffuse reflectance FTIR spectroscopy. J Polym Sci Part B Polym Phys1988; 26: 1585–1593.
47.
XuFFanWZhangY, et al.Modification of tensile, wear and interfacial properties of Kevlar fibers under cryogenic treatment. Compos Part B Eng2017; 116: 398–405.
48.
MukherjeeMKumarSBoseS, et al.Study on the mechanical, rheological, and morphological properties of short Kevlar™ fiber/s-PS composites. Polym - Plast Technol Eng2008; 47: 623–629.
49.
ChinJByrdEEmbreeN, et al.Accelerated UV weathering device based on integrating sphere technology. Rev Sci Instrum2004; 75: 4951–4959.
Supplementary Material
Please find the following supplemental material available below.
For Open Access articles published under a Creative Commons License, all supplemental material carries the same license as the article it is associated with.
For non-Open Access articles published, all supplemental material carries a non-exclusive license, and permission requests for re-use of supplemental material or any part of supplemental material shall be sent directly to the copyright owner as specified in the copyright notice associated with the article.
