Metaplexis japonica seed hair fibers (Mj-fiber), harvested from the seed pods of Metaplexis japonica (Apocynaceae: Asclepiadoideae) originating in China, Japan and Korea, have features ensuring its potential application in the textile and other industrial fields. In spite of the extensive study on the medicinal properties of Metaplexis japonica, research literature about Mj-fiber is quite limited. We obtained Mj-fibers by artificial peeling and seed removing; then the fiber morphology, chemical composition, structures, fiber surface absorption characteristics, and tensile and thermal properties were studied in detail. From the results, Mj-fiber has a hollow structure with a thin fiber wall and large lumen, in which the hollowness is over 92%. Uniquely, Mj-fiber is a natural profiled fiber with a cross-section of a "cross flower" morphology. At the same time, the density of it is very low, accounting for only one-fifth of the cotton fibers, and the fiber length distribution is relatively concentrated. The main component is cellulose, with a content of 53.9 ± 3.20% and structure of cellulose I. In particular, Mj-fiber has excellent hydrophobic and oil affinity surface characteristics. Moreover, the fibers bulkiness and warmth retention performance are comparable to that of duck down. Therefore, the results provide an experimental basis for the application of Mj-fibers in the textile and other industrial fields.
YadavMPKaleMSHicksKB, et al.Isolation, characterization and the functional properties of cellulosic arabinoxylan fiber isolated from agricultural processing by-products, agricultural residues and energy crops. Food Hydrocolloid2017; 63: 545–551.
5.
Lomelí-RamírezMGAndaRRSatyanarayanaKG, et al.Comparative study of the characteristics of green and brown coconut fibers for the development of green composites. Bioresources2018; 13: 1637–1660.
6.
ChenH-LCluverB. Assessment of poplar seed hair fibers as a potential bulk textile thermal insulation material. Cloth Text Res J2010; 28: 255–262.
7.
KarthikTMuruganR. Characterization and analysis of ligno-cellulosic seed fiber from Pergularia daemia plant for textile applications. Fiber Polym2013; 14: 465–472.
8.
SainMPanthapulakkalS. Bioprocess preparation of wheat straw fibers and their characterization. Ind Crop Prod2006; 23: 1–8.
9.
ZhengYWangJZhuY, et al.Research and application of kapok fiber as an absorbing material: a mini review. J Environ Sci-China2015; 27: 21–32.
10.
MeiwuSHongXWeidongY. The fine structure of the kapok fiber. Text Res J2010; 80: 159–165.
11.
ChaiarrekijSApirakchaiskulASuvarnakichK, et al.Kapok I: characteristics of kapok fiber as a potential pulp source for papermaking. Bioresources2011; 7: 0475–0488.
12.
DuanCZhaoNYuX, et al.Chemically modified kapok fiber for fast adsorption of Pb2+, Cd2+, Cu2+ from aqueous solution. Cellulose2013; 20: 849–860.
13.
HoriKFlavierMEKugaS, et al.Excellent oil absorbent kapok [Ceiba pentandra (L.) Gaertn.] fiber: fiber structure, chemical characteristics, and application. J Wood Sci2000; 46: 401.
14.
JiaCChenCKuangY, et al.From wood to textiles: top-down assembly of aligned cellulose nanofibers. Adv Mater2018, pp. 1801347.
15.
MitsuhashiHNomuraTShimizuY, et al.Studies on the constituents of Asclepiadaceae plants. VIII. on the components of Metaplexis japonica Makino 1. Chem Pharm Bull1962; 10: 811–817.
16.
MitsuhashiHNomuraT. On the structure of metaplexigenin and benzoylramanone. Chem Pharm Bull1963; 11: 1333–1336.
17.
MitsuhashiHNomuraT. Studies on the constituents of Asclepiadaceae plants. XVI. on the components of Metaplexis japonica Makino. III: the structure of benzoylramanone. Chem Pharm Bull1965; 13: 1332–1340.
18.
MitsuhashiHNomuraT. Studies on the constituents of Asclepiadaceae plants. XV. on the components of Metaplexis japonica Makino. II. Chem Pharm Bull1965; 13: 274–280.
19.
MitsuhashiHNomuraTHiranoM. Studies on the constituents of Asclepiadaceae plants. XIX. components of Metaplexis japonica Makino. IV. Chem Pharm Bull1966; 14: 717–726.
WarashinaTNoroT. Steroidal glycosides from the roots of Metaplexis japonica. Phytochemistry1998; 49: 2103–2108.
22.
WarashinaTNoroT. Steroidal glycosides from the root of Metaplexis japonica M. Part II. Chem Pharm Bull1998; 46: 1752–1757.
23.
WangDCSunSHShiLN, et al.Chemical composition, antibacterial and antioxidant activity of the essential oils of Metaplexis japonica and their antibacterial components. Int J Food Sci Tech2015; 50: 449–457.
24.
WangBQ. In vitro antioxidant activity Metaplexis japonica Makino extract and derivatives. Adv Mat Res2014; 955–959: 387–389. .
25.
JiaLGuoB. A preliminary study of the effects of the extracts of Metaplexis japonica polysaccharides on the immune suppression of the immune organs and the lymphocyte proliferation of mice. J Liaoning Med Univ2011; 32: 401–402.
26.
YaoH-LLiuYLiuX-H, et al.Metajapogenins A–C, pregnane steroids from shells of Metaplexis japonica. Molecules2017; 22: 646.
27.
Jamarkattel-PanditNKimH. Neuroprotective effects of Metaplexis japonica against in vitro ischemia model. JHAS2013; 3: 51–55.
28.
ReddyNYangY. Properties of high-quality long natural cellulose fibers from rice straw. J Agr Food Chem2006; 54: 8077–8081.
29.
YuHYuC. Influence of various retting methods on properties of kenaf fiber. J Text I2010; 101: 452–456.
30.
ZhouLShaoJZFengXX, et al.Effect of high-temperature degumming on the constituents and structure of cotton stalk bark fibers. J Appl Polym Sci2012; 125: E573–E579.
31.
LiZYuC. Effect of peroxide and softness modification on properties of ramie fiber. Fiber Polym2014; 15: 2105–2111.
32.
WangLHanGZhangY. Comparative study of composition, structure and properties of Apocynum venetum fibers under different pretreatments. Carbohyd Polym2007; 69: 391–397.
33.
WilkesKEWendtRLDelmasA, et al., Thermal performance of one loose-fill fiberglass attic insulation. In: McElroyDLKimpflenJF (eds). Insulation materials, testing and applications. 2nd Volume, ASTM International, 1991.
34.
GaggeAPBurtonACBazettHC. A practical system of units for the description of the heat exchange of man with his environment. Science1941; 94: 428–430.
35.
KrifaM. Fiber length distribution in cotton processing: dominant features and interaction effects. Text Res J2006; 76: 426–435.
36.
WangMPanN. Modeling and prediction of the effective thermal conductivity of random open-cell porous foams. Int J Heat Mass Tran2008; 51: 1325–1331.
37.
HanGWangLLiuM, et al.Component analysis and microfiber arrangement of Apocynum venetum fibers: the MS and AFM study. Carbohyd Polym2008; 72: 652–656.
38.
FinkHPPhilippB. Models of cellulose physical structure from the viewpoint of the cellulose I→II transition. J Appl Poly Sci1985; 30: 3779–3790.
39.
OhSYYooDIShinY, et al.Crystalline structure analysis of cellulose treated with sodium hydroxide and carbon dioxide by means of X-ray diffraction and FTIR spectroscopy. Carbohyd Res2005; 340: 2376–2391.
40.
YueYHanGWuQ. Transitional properties of cotton fibers from cellulose I to cellulose II structure. Bioresources2013; 8: 6460–6471.
41.
NishiyamaYJohnsonGPFrenchAD, et al.Neutron crystallography, molecular dynamics, and quantum mechanics studies of the nature of hydrogen bonding in cellulose Iβ. Biomacromolecules2008; 9: 3133–3140.
42.
TerinteNIbbettRSchusterKC. Overview on native cellulose and microcrystalline cellulose I structure studied by X-ray diffraction (WAXD): comparison between measurement techniques. Lenzinger Berichte2011; 89: 118–131.
