This work explores the transverse forced flow of precursor gases during hyperbaric pressure laser chemical vapor deposition (HP-LCVD). Axial and mass growth rates of carbon fibers are measured experimentally, and a numerical model is developed that provides fiber growth rates in both the mass-transport-limited (MTL) and kinetically limited (KL) regimes. It is found that the fiber’s transport-limited rate increases as the square root of the flow velocity, while simultaneously, the temperature drops with the inverse square root of the flow velocity. Growth is enhanced by forced flow so long as the reaction zone remains within the MTL regime; upon reaching a critical temperature and flow rate, however, fibers enter the KL regime, and the growth rate declines with rising flow rate. Molecular properties of the precursors employed and gas concentrations ultimately determine the range of the MTL and the locations of the critical temperature and flow rate. The growth rates of fibers can indeed be enhanced by transverse forced convection—to at least three times the zero-flow steady-state rate, provided an MTL regime exists. Complex three-dimensional structures may be grown from these fibers in a freeform manner, and the more rapidly such microstructures can be fabricated, the more practical HP-LCVD becomes for industrial use, including the fabrication of novel textiles.
Faraday M. The chemical history of a candle. Royal Institution Christmas Lecture, 1860.
2.
FaradayM. The chemical history of a candle. Lecture 2, New York: Oxford University Press, 2011, pp. 17–30.
3.
KalinchakVVOrlovskayaSGPrudnikovaYV. J Eng Phys Thermophys1998; 71: 1013–1018.
4.
BauerleD. Laser processing and chemistry19962nd ed. Springer: Berlin, Heidelberg, pp. 336–337.
5.
BauerleDLeyendeckerGWagnerD. Laser Grown Single Crystals of Silicon. Appl Phys A Mater Sci Process1983; 30: 147–149.
6.
Zong G. Solid freeform fabrication using gas phase selective area laser deposition. PhD Dissertation, University of Texas at Austin, USA, 1991.
7.
JohanssonSSchweitzJWestbergH. Microfabrication of three-dimensional boron structures by laser chemical processing. J Appl Phys1992; 72: 5956–5956.
8.
LehmanOStukeM. Laser-driven movement of three-dimensional microstructures generated by laser rapid prototyping. Science1995, pp. 1644–1646.
9.
Maxwell JL. Three-dimensional laser-induced pyrolysis: modelling, growth rate control, and application to micro-scale prototyping. PhD Thesis, Rensselaer Polytechnic Institute, USA, 1996.
10.
MaxwellJLBomanMSpringerRW. Process-structure map for diamond-like carbon fibers from ethene at hyperbaric pressures. Adv Funct Mater2005; 15: 1077–1087.
11.
Rytz-FroidevauxYSalatheRPGilgenHH. Laser-initiated metal deposition on GaAs substrates. Phys Lett A1981; 84 A: 216–218.
12.
KrauterWBauerleDFimbergerF. Laser induced chemical vapor deposition of Ni by decomposition of Ni(CO)4. Appl Phys A1983; 31: 13–18.
13.
WestbergHBomanMCarlssonJO. Laser-assisted chemical vapour deposition of TISI2: Aspects of deposition and etching. J Phys IV Colloq1993; 3: 225–232.
14.
AllenSDTringuboAB. Laser chemical vapor deposition of selected area Fe and W films. J Appl Phys1983; 54: 1641–1643.
15.
ComitaPBKodasTT. Real time optical profilometry as a probe of rates of laser induced chemical vapor deposition. J Appl Phys1987; 62: 2280–2285.
16.
ArnoneCRothschildMBlackJG. Visible-laser photo-deposition of chromium oxide films and single crystals. Appl Phys Lett1986; 48: 1018–1020.
17.
EldersJVan VoorstJDW. Laser-induced chemical vapor deposition of titanium diboride. Appl Surf Sci1992; 54: 135–140.
18.
WallenbergerFTNordinePC. Strong, pure, and uniform carbon fibers obtained directly from the vapor phase. Science1993; 260: 66–68.
19.
WallengerberFTNordinePC. Amorphous silicon nitride fibers grown from the vapor phase. J Mater Res1994; 9: 527–530.
20.
WallenbergerFT. Rapid prototyping directly from the vapor phase. Science1995; 267: 1275–1275.
21.
JeanDDutyC. Carbon fiber growth kinetics and thermodynamics using temperature controlled LCVD. Carbon2002; 40: 1435–1435.
22.
MaxwellJLBomanMSpringerRW. Hyperbaric laser chemical vapor deposition of carbon fibers from the 1-alkenes, 1-alkynes, and benzene. J Am Chem Soc2006; 128: 4405–4413.
23.
MaxwellJLBlackMRChavezCA. Growth of normally-immiscible materials (NIMs), binary alloys, and metallic fibers by hyperbaric laser chemical vapor deposition. Appl Phys A Mater Sci Eng2008; 91: 507–514.
24.
Boman M, Westberg H, Johansson S, et al. Helical microstructures grown by laser assisted chemical vapor deposition. In: IEEE micro electro mechanical systems workshop. Travemuende, Germany, 1992, pp.162–167.
25.
BomanMBauerleD. Laser-assisted chemical vapor deposition of born. J Chin Chem Soc1995; 42: 405–405.
26.
LehmannOStukeM. 3-Dimensional laser direct writing of electrically conducting and isolating microstructures. Mater Lett1994; 21: 131–136.
27.
Dean R, Nordine P and Christodoulou C. Novel method for fabricating 3D helical THz antennas directly on semiconductor substrates. In: Proceedings of the conference on Terahertz spectroscopy and applications. SPIE, 1999, 3619, pp.67–77.
28.
Maxwell JL, Williams K, Larsson K, et al. Freeform fabrication of functional microsolenoids, electromagnets and helical springs using high-pressure laser chemical vapor deposition. In: Proceedings of the IEEE micro-electro mechanical systems (MEMS) conference, 1999; Orlando, Florida, USA.
29.
Christiansen S, Cui T, Williams K, et al. High-speed laser chemical vapor deposition of sacrificial cores for three-dimensional microfluidic systems. In: 4th international conference on microreaction technology (IMRET-4), 2000, pp.127–132.
30.
Maxwell JL. R&D 100 Award, LaserWeave(R). R&D Magazine, July 2008.
31.
StukeMMuellerKMuellerT. Laser-direct-write creation of three-dimensional OREST microcages for contact-free trapping, handling and transfer of small polarizable neutral objects in solution. Appl Phys A Mater Sci Process2005; 81: 915–922.
32.
ZeigerHJEhrlichDJTsaoDYTransport and kinetics. In: EhrlichDJTsaoDY (eds). Laser microfabrication: Thin film processes and lithography, Academic Press: Boston, 1989, pp. 299–305.
33.
AllenSDGoldstoneJAStopeJP. Transient nonlinear laser heating and deposition: A comparison of theory and experiment. J Appl Phys1986; 59: 1653–1653.
34.
BlochJZeiriYLuccheseRR. Theoretical study of laser-induced chemical vapor deposition. Appl Surf Sci1991; 257: 402–416.
35.
MaxwellJLShahJMockJ. Rapid prototyping of titanium nitride using three-dimensional laser chemical vapor deposition. Solid freeform fabrication procedure1998; 9: 575–579.
36.
BauerleD. Laser processing and chemistry19962nd ed. Springer: Berlin, Heidelberg, pp. 137–150.
37.
MaxwellJLKrishnanRHaridasS. High pressure convectively-enhanced laser chemical vapor deposition of titanium. Solid Freeform Fabrication Proceedings1997; 9: 497–504.
38.
MaxwellJLChavezCASpringerRW. Preparation of super-hard BxCy fibers by micro-vortex flow hyperbaric chemical vapor deposition. Diamo Rel Mater2007; 16: 1557–1564.
39.
MazumderJKarA. Theory and application of laser chemical vapor deposition, New York: Plenum Press, 1995, pp. 286–286.
40.
HaufWGrigullU. Advances in heat transfer, New York: Academic Press, 1970, pp. 134–366.
41.
MaxwellJLBomanMSpringerRW. Hyperbaric laser chemical vapor deposition of carbon fibers from the 1-alkenes, 1-alkynes, and benzene. J Am Chem Soc2006; 148: 4411–4411.
42.
LeyendeckerGBauerleDGeittnerP. Laser induced chemical vapor deposition of carbon. Appl Phys Lett1981; 39: 921–923.
43.
WestbergHBomanMJohannsonS. Truly three dimensional structures microfabricated by laser chemical processing. Digest of Technical Papers, 1991 International Conference on Solid-State Sensors and Actuators (TRANSDUCERS)24–27 June 1991, pp. 516–519.
44.
WallenbergerFTDieffendorfRJFrischknechtKD. Novel carbon fibers by laser assisted chemical vapor deposition (LCVD). Mater Res Soc Symp Proc1994; 349: 51–59.
45.
BauerleD. Laser processing and chemistry19962nd ed. Springer: Berlin, Heidelberg, pp. 94–94.
46.
Maxwell JL and Pegna J. Method and apparatus for the freeform growth of three-dimensional structures using pressurized precursor flows and growth rate control. Patent #5,786,023, USA, 1998.
47.
GoduguchintaKPegnaJ. Position dependence of growth rate in convection enhanced laser CVD of carbon rods. Appl Phys A Mater Sci Process2007; 88: 329–332.
48.
Pickering E, Lackey WJ and Crain S. Microstructure of Ti3SiC2 coatings synthesized by CVD. Ceramic Transactions 1999; 96: 39–50.
49.
DutyCJohnsonRGillespieJ. Heat and mass-transfer modeling of an angled gas-jet LCVD system. Appl Phys A Mater Sci Process2003; 77: 697–705.
50.
Yu J. Microscale thermofluidic modeling of LCVD fiber growth. PhD Thesis, Ecole Polytechnique de Montreal, Canada, 2007.
51.
KaysWM. Convective heat and mass transfer, McGraw-Hill Book Company: New York, 1966, pp. 313–314.
52.
BenitezJ. Principles and modern applications of mass transfer operations20092nd ed. Wiley & Sons: New Jersey, pp. 121–122.
JohnsonRWDutyCEFedorovAG. Computational modeling of forced flow laser chemical vapor deposition. Appl Phys A2008; 90: 333–345.
55.
MaxwellJLPegnaJMessiaDV. Real-time volumetric growth rate measurements and feedback control of three-dimensional laser chemical vapor deposition. Appl Phys A Mater Sci Process1998; 67: 323–323.
