Multilobal fibres contain several grooves and have higher surface area than round fibres. Cell density can be enhanced when cultured on scaffolds manufactured with multilobal fibres. This study compared the cell growth of dermal fibroblasts and osteoblast-like SaOS2 cells on polymeric scaffolds produced from multilobal fibres to the conventional round-fibred scaffolds. Cells were cultured on round nylon 6,6, trilobal nylon 6,6, round polyethylene terephthalate (PET) and multilobal PET scaffolds for 14 days. There were more cells cultured on trilobal nylon 6,6 and PET multilobal scaffolds than their round counterparts. Preference to the type of multilobal scaffolds was cell dependent. Fibroblasts increased by 21.8 ± 1.9 fold to 6.3 × 105 cells (p < 0.001) when cultured on trilobal nylon 6,6 scaffolds while SaOS2 cells exhibited a 16.7 ± 2.8 fold increase (2.9 × 105 cells, p < 0.001) on the multilobal PET scaffolds after 14 days of culture. The ability of multilobal fibres to accommodate large quantities of cells presents an excellent alternative to round fibres as scaffolds for tissue engineering.
HutmacherDW. Scaffold design and fabrication technologies for engineering tissues–state of the art and future perspectives. J Biomater Sci Polym Ed2001; 12(1): 107–124.
2.
LeeJCuddihyMJKotovNA. Three-dimensional cell culture matrices: state of the art. Tissue Eng Part B Rev2008; 14(1): 61–86.
3.
YangSLeongKFDuZ. The design of scaffolds for use in tissue engineering. Part I. Traditional factors. Tissue Eng2001; 7(6): 679–689.
4.
YangSLeongKFDuZ. The design of scaffolds for use in tissue engineering. Part II. Rapid prototyping techniques. Tissue Eng2002; 8(1): 1–11.
5.
HolyCEFialkovJADaviesJE. Use of a biomimetic strategy to engineer bone. J Biomed Mater Res A2003; 65(4): 447–453.
AydinHMEl HajAJPiskinE. Improving pore interconnectivity in polymeric scaffolds for tissue engineering. J Tissue Eng Regen Med2009; 3(6): 470–476.
8.
HuiPWLeungPCSherA. Fluid conductance of cancellous bone graft as a predictor for graft-host interface healing. J Biomech1996; 29(1): 123–132.
9.
AgrawalCMRayRB. Biodegradable polymeric scaffolds for musculoskeletal tissue engineering. J Biomed Mater Res2001; 55(2): 141–150.
10.
PasquinelliGVinciMCGamberiniC. Architectural organization and functional features of early endothelial progenitor cells cultured in a hyaluronan-based polymer scaffold. Tissue Eng Part A2009; 15(9): 2751–2762.
11.
ShenGTsungHCWuCF. Tissue engineering of blood vessels with endothelial cells differentiated from mouse embryonic stem cells. Cell Res2003; 13(5): 335–341.
12.
MehtaBCHolmanDWGrzybowskiDM. Characterization of arachnoidal cells cultured on three-dimensional nonwoven PET matrix. Tissue Eng2007; 13(6): 1269–1279.
13.
MuschlerGFNakamotoCGriffithLG. Engineering principles of clinical cell-based tissue engineering. J Bone Joint Surg Am2004; 86-A(7): 1541–1558.
14.
BeltramiCAFinatoNRoccoM. Structural basis of end-stage failure in ischemic cardiomyopathy in humans. Circulation1994; 89(1): 151–163.
15.
JingDParikhACantyJMJr. Stem cells for heart cell therapies. Tissue Eng Part B Rev2008; 14(4): 393–406.
PaulHLDillerKR. Comparison of thermal insulation performance of fibrous materials for the advanced space suit. J Biomech Eng2003; 125: 639–647.
19.
MarcusRKDavisWCKnippelBC. Capillary-channeled polymer fibers as stationary phases in liquid chromatography separations. J Chrom A2003; 986(1): 17–31.
20.
StanelleRMignanelliMBrownP. Capillary-channeled polymer (C-CP) fibers as a stationary phase in microbore high-performance liquid chromatography columns. Anal Bioanal Chem2006; 384(1): 250–258.
21.
AndrewsKDFeugierPBlackRA. Vascular prostheses: performance related to cell-shear responses. J Surg Res2008; 149(1): 39–46.
22.
BhattacharyaVMcSweeneyPAShiQ. Enhanced endothelialization and microvessel formation in polyester grafts seeded with CD34(+) bone marrow cells. Blood2000; 95(2): 581–585.
23.
BonaniWManiglioDMottaA. Biohybrid nanofiber constructs with anisotropic biomechanical properties. J Biomed Mater Res B Appl Biomater2011; 96(2): 276–286.
24.
Nasr-Esfahani M and Mehrabanian M. Production of bone-like 40% nylon 6,6-nano hydroxyapatite scaffold via salt-leaching/solvent casting technique. In: 2nd international conference on chemistry and chemical engineering, Chengdu, China, 2011, pp.40–44. IACSIT Press.
25.
ShenJLiYZuoYZouQ. Characterization and cytocompatibility of biphasic calcium phosphate/polyamide 6 scaffolds for bone regeneration. J Biomed Mater Res B Appl Biomater2010; 95(2): 330–338.
26.
RasbandWH. ImageJ: Image processing and analysis, Maryland, Bethesda, USA: National Institute of Health, 1997.
SinclairKDWebbKBrownPJ. The effect of various denier capillary channel polymer fibers on the alignment of NHDF cells and type I collagen. J Biomed Mater Res Part A2010; 95A(4): 1194–1202.
29.
Sinclair KD, Webb K and Brown PJ. Capillary channel polymer fibers as structural templates for ligament regeneration. In: The American Association of Textile Chemists and Colorists Conference, 2008, pp.36–40.
30.
Sinclair KD, Webb K and Brown PJ. Options for anterior cruciate ligament (ACL) reconstruction. In: The American Association of Textile Chemists and Colorists Conference, 2008, pp.32–34.
31.
Tong HW, Wang M and Lu WW. Electrospinning and evaluation of PHBV-based tissue engineering scaffolds with different fibre diameters, surface topography and compositions. J Biomater Sci Polym Ed. Epub ahead of print 18 March 2011. DOI: 10.1163/092050611X560708.
32.
ParizekMNovotnaKBacakovaL. The role of smooth muscle cells in vessel wall pathophysiology and reconstruction using bioactive synthetic polymers. A review. Physiol Res2011; 60(3): 419–437.
33.
YimEKLeongKW. Significance of synthetic nanostructures in dictating cellular response. Nanomedicine2005; 1(1): 10–21.
34.
YangSPLeeTM. The effect of substrate topography on hFOB cell behavior and initial cell adhesion evaluated by a cytodetacher. J Mater Sci Mater Med2011; 22(4): 1027–1036.
PapenburgBJRodriguesEDWesslingM. Insights into the role of material surface topography and wettability on cell-material interactions. Soft Matter2010; 6(18): 4377–4388.
37.
KidambiSUdpaNSchroederSA. Cell adhesion on polyelectrolyte multilayer coated polydimethylsiloxane surfaces with varying topographies. Tissue Eng2007; 13(8): 2105–2117.
38.
VernonRBGoodenMDLaraSL. Microgrooved fibrillar collagen membranes as scaffolds for cell support and alignment. Biomaterials2005; 26(16): 3131–3140.
39.
WanYWangYLiuZ. Adhesion and proliferation of OCT-1 osteoblast-like cells on micro- and nano-scale topography structured poly(L-lactide). Biomaterials2005; 26(21): 4453–4459.
40.
KatoSAkagiTSugimuraK. Evaluation of biological responses to polymeric biomaterials by RT-PCR analysis IV: study of c-myc, c-fos and p53 mRNA expression. Biomaterials2000; 21(5): 521–527.
41.
SchlichtHHaugenHJSabetrasekhR. Fibroblastic response and surface characterization of O(2)-plasma-treated thermoplastic polyetherurethane. Biomed Mater2010; 5(2): 25002–25002.
42.
ChoeeJ-HLeeSJLeeYM. Proliferation rate of fibroblast cells on polyethylene surfaces with wettability gradient. J Appl Polym Sci2004; 92(1): 599–606.
43.
KimSHHaHJKoYK. Correlation of proliferation, morphology and biological responses of fibroblasts on LDPE with different surface wettability. J Biomater Sci Polym Ed2007; 18(5): 609–622.
44.
HuangXShiBLiB. Surface characterization of nylon 66 by inverse gas chromatography and contact angle. Polym Testing.2006; 25(7): 970–974.
45.
GeckelerKEWackerRAicherWK. Biocompatibility correlation of polymeric materials using human osteosarcoma cells. Naturwissenschaften.2000; 87(8): 351–354.
46.
DonelliITaddeiPSmetPF. Enzymatic surface modification and functionalization of PET: A water contact angle, FTIR, and fluorescence spectroscopy study. Biotech Bioeng2009; 103(5): 845–856.
47.
WeiQLiuYHouD. Dynamic wetting behavior of plasma treated PET fibers. J Mater Proc Technol2007; 194(1–3): 89–92.
