The objective was to examine the effects of layering fabrics on selected properties known to be critical in the outdoor recreational activity market (permeability to air and to water vapor, and thermal-related measures including ’dry’ and ’wet’ thermal resistance). With laboratory-based testing used by manufacturers to aid fabric selection, information on the way in which fabrics behave as layered arrangements is pertinent.Comparisons of effects on fabric properties were based on fibers (merino wool, polyester), knit structures (single jersey, interlock, eyelet), and whether differences were apparent with multiple-layer arrangements typical of end use, including outer layers. Standard methods and modifications to these were applied. Some properties differed according to the spacing (distance) between layers and/or between a first layer and a hypothetical ’skin’ surface. Differences among the different fabrics/fibers were more apparent with one layer than with multiple layers. Layering of fabrics which are likely to be used as garments worn together has major effects on properties such as permeability to air and water vapor, thermal resistance, and nominal thermal conductance. Effects of adding a second layer typically exceeded those of adding a third.
Schneider AM , Holcombe BV and Goldsmid HJHeat transfer through moist fabrics. Textile Res J1992 ; 62(2): 61-66.
3.
Spencer-Smith JLThe physical basis of clothing comfort. Part 1: General review. Clothing Res J1976; 4(3): 126-138.
4.
Yoon HN and Buckley A.Improved comfort polyester. Part I: Transport properties and thermal comfort of polyester/cotton blend fabrics. Textile Res J1984; 54(5): 289-298.
5.
Prahsarn C., Barker RL and Gupta BSMoisture vapor transport behavior of polyester knit fabrics. Textile Res J2005; 75(4): 346-351.
6.
Kim JO and Spivak SMDynamic moisture vapor transfer through textiles. Part II: Further techniques for microclimate moisture and temperature measurement. Textile Res J1994; 64(2): 112-121.
7.
Li Y., Holcombe BV and Apcar F.Moisture buffering behavior of hygroscopic fabric during wear. Textile Res J1992; 62(11): 619-627.
8.
Laing RM, Niven BE, Barker RL and Porter J.Response of wool knit apparel fabrics to water vapor and water. Textile Res J2007; 77(8): 583-590.
9.
Wilson CA, Bevin NK, Laing RM and Niven BESolar protection - Effect of selected fabric and use characteristics on ultraviolet transmission. Textile Res J2008; 78(2): 95-104.
10.
Wilson CA and Parisi A.Protection from solar erythemal ultraviolet radiation - Simulated wear and laboratory testingTextile Res J2006; 76(3): 216-225.
11.
House JR, Squire JD and Staples R.Optimising the number of layers in firefighters’ hoods. Int J Cloth Sci Technol2002; 14(2): 111-118.
12.
Nielsen R., Gavhed DCE and Nilsson H.Thermal function of a clothing ensemble during work: Dependency on inner clothing layer fit. Ergonomics1989; 32(12): 1581-1594.
13.
Babus’Haq RF, Hiasat MAA and Probert SDThermally insulating behaviour of single and multiple layers of textiles under wind assault. Appl Energy1996; 54(4): 375-391.
14.
Ruckman JEThe application of a layered system to the marketing of outdoor clothing . J Fashion Marketing Management2005; 9(1): 122-129.
15.
Ren YJ and Ruckman JECondensation in three-layer waterproof breathable fabrics for clothing . Int J Cloth Sci Technol2004; 16(3): 335-347.
16.
Rossi RE, Gross R. and May H.Water vapor transfer and condensation effects in multilayer textile combinations . Textile Res J2004; 74(1): 1-6.
17.
Kim E., Yoo SJ and Shim H.Performance of selected clothing systems under subzero conditions: Determination of performance by a human-clothing-environment simulator. Textile Res J2006; 76(4): 301-308.
18.
Yoneda M., Mizuno Y. and Yoneda J.Measurement of water absorption perpendicular to fabric plane in two-and multi-layered fabric systems. Int J Cloth Sci Technol1994 ; 6(2/3): 57-64.
19.
International Organization for Standardization.ISO 139: 2005 Textiles - standard atmospheres for conditioning and testing . Geneva, International Organization for Standardization.
20.
Laing RM, Gore SE, Wilson CA, Carr DJ and Niven BEStandard test methods adapted to better simulate fabrics in use. Textile Res J2010; 80(12): 1138-1150.
21.
Fonesca GF and Breckenridge JRWind penetration through fabric systems, Part 1. Textile Res J1965; 35(2): 95-103.
22.
Wilson CA and Laing RMEstimating thermal resistance of dry infant bedding - Part 1: A theoretical mathematical model. Int J Cloth Sci Technol2002; 14(1): 25-40.
23.
Wilson CA, Laing RM and Tamura T.Intrinsic ’dry’ thermal resistance of dry infant bedding during use -Part 2 Estimated vs measured. Int J Cloth Sci Technol2004; 16(3): 310-323.
24.
Yoo S. and Kim E.Effects of multilayer clothing system array on water vapor transfer and condensation in cold weather clothing ensemble. Textile Res J2008; 78(3): 189-197.
25.
Oh A.The measurement of water vapour transfer rate through clothing system with air gap between layers. Heat and Mass Transfer2008; 44(4): 375-379.
26.
Song G.Clothing air gap layers and thermal protective performance in single layer garment. J Industrial Textiles2007; 36(3): 193-205.
27.
Gore SE, Laing RM, Wilson CA, Carr DJ and Niven BEStandardizing a pre-treatment cleaning procedure and effects of application on apparel fabrics. Textile Res J2006; 76(6): 455-464.
28.
International Organization for Standardization.ISO 11092:1993 Textiles - Physiological effects - Measurement of thermal and water-vapour resistance under steady-state conditions (sweating guarded hotplate test).
29.
Laing RM, Wilson CA, Gore SE, Niven BE and Carr DJDetermining the drying time of apparel fabrics. Textile Res J2007; 77(8): 583-590.
30.
International Organization for Standardization.ISO 9237:1995 Textiles - Determination of the permeability of fabric to air.
31.
Clothing and Textile Sciences.MAPP 05 Determination of air permeability Clothing and Textile Sciences, University of Otago, Dunedin.
32.
British Standards Institution.BS 7209: 1990 Water vapour permeable apparel fabrics.
33.
Laing RM, Gore SE, Wilson CA, Carr DJ and Niven BEStandard test methods adapted to better simulate fabrics in use. Textile Res J2010; 80(12): 1138-1150.
34.
National Fire Protection Association.NFPA: 1971 Protective clothing for structural fire fighting - Appendix B Quincy , Massachusetts, USA: National Fire Protection Association, 1990..
35.
McCullough EAReport to ASTM subcommittee F 23.60 on human factors interlaboratory testing of ASTMF 1865: The sweating hot plate methods 2002.
36.
Bevin NKConductance heat transfer of selected apparel fabrics, clothing and textile sciencesUniversity of Otago, 2006.
37.
Zar JHBiostatistical analysised2nd edition. New Jersey, USA: Prentice-Hall, 1984.
38.
Brown MB and Forsythe ABThe small sample behaviour of some statistics which test the equality of several means. Technometrics1974; 16(1): 129-132.
39.
Tamhane ACA comparison of procedures for multiple comparisons of means with unequal variances. J Am Stat Assoc1979; 74: 471-480.
40.
SPSS Inc.SPSS 16.0.2 for Windows. SPSS Imc. Chicago, Illinois, USA, 2008.
41.
Wilson CA, Laing RM and Niven BEMultiple layer bedding materials and the effect of air spaces on ’wet’ thermal resistance of dry materials. J Human Env System2000; 4(1): 23-32.
42.
British Standards Institution.British standard method of test for knitted fabrics.
43.
British Standards Institution.BS EN 12127:1998 Determination of mass per unit area using small samples .
44.
International Organization for Standardization.ISO 5084:1996 Textiles - Determination of thickness of textiles and textile products. Geneva: International Organization for Standardization, 1996.
